WARNING SYSTEMS
Warning Systems Wiring Diagram for Nissan Armada SE 2009
List of elements for Warning Systems Wiring Diagram for Nissan Armada SE 2009:
- (or pnk)
- 13p
- Air bag diagnosis sensor unit (under center console)
- B7 (under driver's seat)
- Bat
- Body control module (bcm) (behind center of dash)
- Buckle sw
- Buzzer
- Can-h
- Can-l
- Combination meter
- Combination switch
- Computer data lines system
- Door sw (dr)
- Fuse & fusible link box (at right rear of engine compt)
- Fuse & relay box (at right rear of engine compt)
- Fuse 10a
- Fuse block (j/b) (behind right end of dash)
- Fusible link f 50a
- Gnd
- Headlights system
- Hot at all times
- Hot in on or start
- Ign sw
- Input 1
- Input 2
- Input 3
- Input 4
- Input 5
- Key
- Key sw
- Key switch & ignition knob switch
- Key switch & key lock solenoid (on steering column)
- Keyless pwr tuner
- Keyless tuner signal
- Left front door switch (at left "b" pillar)
- Left seat belt buckle pre-tensioner assembly (in driver's seat belt buckle)
- M18
- M19
- M20
- M23
- M24
- M28
- M35
- M61 (behind center of dash)
- Output 1
- Output 2
- Output 3
- Output 4
- Output 5
- Pnk
- Power
- Remote keyless entry receiver (behind right side of dash)
- Seat belt
- Seat belt ind
- Sig gnd
- Signal
- Tire pressure ind
- Tire pressure warning check connector (under front of center console)
- Tpms
- Unified meter control unit (w/ information display)
- W/ intelligent
- W/o intelligent