Электросхемы СИСТЕМА УСИЛИТЕЛЯ РУЛЯ Chevrolet Corvette 2004

СИСТЕМА УСИЛИТЕЛЯ РУЛЯ

Электросхема усилителя руля для Chevrolet Corvette 2004

Электросхема усилителя руля для Chevrolet Corvette 2004 - Список элементов:

• (in dash harness, 19 cm from yaw rate sensor connector)
• (in forward light harness, 12.5 cm from breakout to ebcm connector) s106
• 2627 (or 914)
• Abs fuse 52 40a
• Abstrns fuse 5 10a
• Battery
• Brake fluid pressure sensor (on left side of brake pressure modulator valve)
• Brake press sens sig
• Class 2 serial data
• Computer data lines system
• Electronic brake control module (ebcm) (at left front side of engine compartment, on frame rail)
• Electronic suspension control (esc) module (in rear compartment, inside left storage compartment)
• G103 (on left frame rail, near brake pressure modulator valve)
• G108 (on frame rail, below battery tray)
• Ground
• High effort ctrl
• Hot at all times
• Hot in on
• Ignition 3
• Lateral accel sens sig
• Lateral accelerometer sensor (under right seat)
• Low effort ctrl
• Low reference
• Msva high
• Msva low
• Nca
• Power distribution system
• Red
• S108 (in forward light harness, 6 cm from breakout to ebcm connector)
• S308
• S310 (in dash harness, 11 cm from yaw rate sensor connector)
• Steering wheel position sensor (at base of steering column)
• Str pos sens sig
• Str whl pos sens 5v ref
• Str whl pos sig a
• Str whl pos sig b
• Underhood fuse block (on right side of engine compartment)
• Variable effort steering actuator (on left side of steering rack assembly)
• Yaw rate sens sig
• Yaw rate sensor (under hvac control head)