WARNING SYSTEMS
Warning Systems Wiring Diagram for Chevrolet Monte Carlo SS 2006
List of elements for Warning Systems Wiring Diagram for Chevrolet Monte Carlo SS 2006:
- Acc
- Ajar
- Auto
- Battery positive volt
- Bcm fuse 10a
- Body control module (bcm) (left of steering column)
- Chmsl/ backup fuse 10a
- Computer data lines system
- Driver door lock actuator (rear of driver door)
- Driver information center (dic)
- Driver seat belt switch (inside driver seat belt buckle)
- G202 (on right side of steering column below c201)
- G301 (below driver door opening, rear of left a-pillar)
- Ground
- Head
- Headlamp switch
- Hot at all times
- Ignition switch
- Inflatable restraint passenger air bag on/off indicator
- Inflatable restraint sensing & diagnostic module (sdm) (under front passenger seat, under carpet)
- Instrument panel cluster (ipc)
- Int lights fuse 10a
- Int lts/ ws wash fuse 15a
- Key-in ignition switch
- Left front tire pressure monitor sensor
- Left rear tire pressure monitor sensor
- Left seat belt sw sig
- Lf door ajar sw sig
- Lf door open sw sig
- Logic
- Low ref
- Low tire pressure ind
- Lt t/sig fuse 15a
- Nca
- Off
- Off/run/crank voltage
- Open
- Park
- Park lamp switch on sig
- Pass seat belt ind
- Passenger seat belt switch (inside front passenger seat belt buckle)
- Pnk
- Power distribution system
- Remote control door lock receiver (rcdlr) (under defroster grill panel)
- Right front tire pressure monitor sensor
- Right rear tire pressure monitor sensor
- Right seat belt sw sig
- Rt t/sig fuse 15a
- Run
- Rvc sen fuse 10a
- Seat belt ind
- Serial data
- Solid state
- Start
- Tan
- Underhood fuse block (mounted to right strut tower)
- Xx tire ok xx psi xx tire low xx psi xx tire high xx psi check tire pressure service tire monitor