Wiring Diagram VW JETTA 2005 - ABS control unit - Control unit in dash panel insert - ABS hydraulic pump
| F | Brake light switch |
| J104 | ABS control unit |
| J217 | Automatic gearbox control unit |
| J285 | Control unit in dash panel insert |
| N99 | Front right ABS inlet valve |
| N100 | Front right ABS outlet valve |
| N101 | Front left ABS inlet valve |
| N102 | Front left ABS outlet valve |
| SA4 | Fuse 4 in fuse holder A |
| SC4 | Fuse 4 on fuse holder C |
| SA5 | Fuse 5 in fuse holder A |
| T3i | 3-pin connector |
| T10 | 10-pin connector |
| T10a | 10-pin connector |
| T16 | 16-pin connector |
| T25 | 25-pin connector |
| T32 | 32-pin connector |
| T68 | 68-pin connector |
| U31 | Diagnostic connection |
| V64 | ABS hydraulic pump |
| 671 | Earth point 1, on front of left longitudinal member |
| A76 | Connection (K-diagnosis wire), in dash panel wiring harness |
| B432 | Connection (foot operated parking brake), in main wiring harness |
| * | According to equipment |
Wiring Diagram VW JETTA 2005 - Rear right speed sensor - Front right speed sensor - Rear left speed sensor - Front left speed sensor - ABS control unit
| G44 | Rear right speed sensor |
| G45 | Front right speed sensor |
| G46 | Rear left speed sensor |
| G47 | Front left speed sensor |
| J104 | ABS control unit |
| N133 | Rear right ABS inlet valve |
| N134 | Rear left ABS inlet valve |
| N135 | Rear right ABS outlet valve |
| N136 | Rear left ABS outlet valve |
| T10 | 10-pin connector |
| T25 | 25-pin connector |
| B383 | Connection 1 (powertrain CAN bus, high), in main wiring harness |
| B390 | Connection 1 (powertrain CAN bus, low), in main wiring harness |
Can't find your car? Check -> DiagnostData.com!
