Wiring Diagram VW POLO 2001 - Starter inhibitor and reversing light relay - reversing light switch
| A | Battery |
| B | Starter |
| D | Ignition/starter switch |
| F4 | Reversing light switch |
| J226 | Starter inhibitor and reversing light relay |
| SA2 | Fuse -2- on battery fuse box |
| T6g | 6-pin connector, black, in protective housing for connectors |
| T10a | 10-pin connector, black, in protective housing for connectors |
| T10e | 10-pin connector, green, in protective housing for connectors |
| T10q | 10-pin connector, blue, in protective housing for connectors |
| D107 | Connection -5-, in engine compartment wiring harness |
| D112 | Connection -10-, in engine compartment wiring harness |
Wiring Diagram VW POLO 2001 - Automatic gearbox control unit - multi-function switch
| F125 | Multi-function switch |
| J... | Engine control units |
| J217 | Automatic gearbox control unit |
| SB21 | Fuse -21- on fuse box |
| TV2 | Terminal 30 junction box |
| T6j | 6-pin connector, multi-function switch |
| T10d | 10-pin connector, pink, in protective housing for connectors |
| T10q | 10-pin connector, blue, in protective housing for connectors |
| T16 | 16-pin connector, diagnosis |
| T68 | 68-pin connector |
| 10 | Earth point, in plenum chamber |
| 18 | Earth point, on engine block |
| 114 | Earth connection, in automatic gearbox wiring harness |
| A76 | Connection (diagnosis wire K), in dash panel wiring harness |
| A98 | Positive (+) connection -4- (30), in dash panel wiring harness |
| U3 | Connection -1-, in automatic gearbox wiring control unit |
Wiring Diagram VW POLO 2001 - Automatic gearbox control unit - kick-down switch - gearbox speed sender - oil temperature sender - solenoid valve 1 - solenoid valve 2 - solenoid valve 3
| F8 | Kick-down switch |
| G38 | Gearbox speed sender |
| G93 | Gearbox oil temperature sender |
| J... | Engine control units |
| J217 | Automatic gearbox control unit |
| N88 | Solenoid valve 1 |
| N89 | Solenoid valve 2 |
| N90 | Solenoid valve 3 |
| N91 | Solenoid valve 4 |
| N92 | Solenoid valve 5 |
| N93 | Solenoid valve 6 |
| N94 | Solenoid valve 7 |
| T2f | 2-pin connector, on gearbox |
| T10q | 10-pin connector, blue, in protective housing for connectors |
| T12e | 12-pin connector |
| T68 | 68-pin connector |
| * | Data wire |
Wiring Diagram VW POLO 2001 - Automatic gearbox control unit - vehicle speed sender (inductive sender - 2 connections) - selector lever position P/N warning lamp - selector lever display illumination
| D | Ignition/starter switch |
| F | Brake light switch |
| G68 | Vehicle speed sender (inductive sender, 2 connections) |
| J217 | Automatic gearbox control unit |
| K142 | Selector lever position P/N warning lamp |
| L101 | Selector lever display illumination |
| SB25 | Fuse -25- on fuse box |
| SB33 | Fuse -33- on fuse box |
| T2g | 2-pin connector, on gearbox |
| T6g | 6-pin connector, black, in protective housing for connectors |
| T10d | 10-pin connector, pink, in protective housing for connectors |
| T68 | 68-pin connector |
| A2 | Positive (+) connection (15), in dash panel wiring harness |
| U8 | Positive (+) connection (15a), in automatic gearbox wiring harness |
Can't find your car? Check -> DiagnostData.com!
