SEAT TOLEDO 2001 – ABS, ABS electronic differential lock (EDL) and brake pad wear control, only vehicles with syncro, (MARK 20) . Wiring diagrams, Pin Connector, Location

Wiring Diagram SEAT TOLEDO 2001 - ABS with EDL control unit - brake light switch - CCS brake pedal switch/diesel direct injection system

A	Battery (00532)
D	Ignition/start-up switch
F	Brake light switch (00526-2131)
F47	CCS brake pedal switch/diesel direct injection system (00629)
J...	Engine control units
J104	ABS with EDL control unit
J217	Automatic gearbox control unit
J317	Terminal 30 voltage supply relay (01054)
S5	Fuses in fuse box/relay plate
S13	Fuses in fuse box/relay plate
S178	Fuse -6- (30) in fuse box/battery
S179	Fuse -7- (30) in fuse box/battery
S243	Fuse in fuse box
T3	3-pin connector, in battery
T10d	10-pin connector, green, on connector protective housing, in plenum chamber, left side
T25	25-pin connector
T68	68-pin connector
501	Bolted connection -2- (30), on relay plate
A2	Positive connection (15), in dash panel wiring harness
A20	Connection (15a), in dash panel wiring harness
A98	Positive connection -4- (30), in dash panel wiring harness
A121	Connection (High-Bus), in dash panel wiring harness
A122	Connection (Low-Bus), in dash panel wiring harness
W1	Positive connection -1- (54) in rear wiring harness
*	Only on vehicles with motor diesel
**	Only vehicles with automatic gearbox

Wiring Diagram SEAT TOLEDO 2001 - ABS with EDL control unit - differential lock valve 1 - differential lock valve 2 - ABS inlet valve - rear right - ABS inlet valve rear left

D	Ignition/starter switch
J104	ABS with EDL control unit
N125	Differential lock valve 1 (00279-1223)
N126	Differential lock valve 2 (00280-1224)
N133	ABS inlet valve, rear right (00273-1211)
N134	ABS inlet valve, rear left (00274-1212)
N135	ABS outlet valve, rear right (00274-1213)
N136	ABS outlet valve, rear left (00276-1214)
S9	Fuses in fuse box/relay plate
V64	ABS hydraulic pump (01276-4133)
T2	2-pin connector
T16	16-pin connector, self-diagnosis
T25	25-pin connector
A2	Positive connection (15), in dash panel wiring harness
A76	Connection (diagnosis wire K), in dash panel wiring harness
*	Vehicles with EDL only

Wiring Diagram SEAT TOLEDO 2001 - ABS with EDL control unit - longitudinal acceleration sender - ABS inlet valve - front right - ABS outlet valve - front right

G251	Longitudinal acceleration sender (01279)
J104	ABS with EDL control unit
J503	Control unit with display for radio and navigation (00464)
N99	ABS inlet valve, front right (00259-1114)
N100	ABS outlet valve, front right (00267-1134)
N101	ABS inlet valve, front left (00257-1112)
N102	ABS outlet valve, front left (00265-1132)
T25	25-pin connector
T26	26-pin connector
A132	Connection (TCS/ESP), in dash panel wiring harness
A133	Connection (ABS pulse left),in dash panel wiring harness
A134	Connection (ABS pulse right), in dash panel wiring harness
**	Vehicles with navigation system only

Wiring Diagram SEAT TOLEDO 2001 - ABS with EDL control unit - wheel speed sensor rear right - wheel speed sensor front right

G44	Wheel speed sensor, rear right (00287-1243)
G45	Wheel speed sensor, front right (00285-1241)
G46	Wheel speed sensor, rear left (00290-1311)
G47	Wheel speed sensor, front left (00283-1233)
J104	ABS with EDL control unit
T2d	2-pin connector, in ABS sensor, front left
T2e	2-pin connector, in ABS sensor, front left right
T2f	2-pin connector, in ABS sensor, rear left
T2g	2-pin connector, in ABS sensor, rear left
T25	25-pin connector
12	Earth point in engine compartment, to left
D146	Connection (wheel speed sensor, rear left +), in engine compartment wiring harness
D147	Connection (wheel speed sensor, rear left -), in engine compartment wiring harness
D148	Connection (wheel speed sensor, rear right +), in engine compartment wiring harness
D149	Connection (wheel speed sensor, rear right -), in engine compartment wiring harness
*	Vehicles with brake pad wear control only

Wiring Diagram SEAT TOLEDO 2001 - ABS with EDL control unit - control unit with display in dash panel insert - brake lining/pad wear sender front left

G34	Brake lining/pad wear sender, front left
J104	ABS with EDL control unit
J285	Control unit with display in dash panel insert (01317)
K32	Brake lining/pad wear warning lamp (01046)
K47	ABS warning lamp
T25	25-pin connector
T32	32-pin connector, blue, in dash panel insert
T32a	32-pin connector, green, in dash panel insert
33	Earth point, behind dash panel, to right
81	Earth connection -1-, in dash panel wiring harness
135	Earth connection -2-, in dash panel wiring harness
D53	Connection (brake pad wear indicator, right side), in engine compartment wiring harness
D54	Connection (brake pad wear indicator, right side), in engine compartment wiring harness
*	Vehicles with brake pad wear control only