Wiring Diagram SEAT TOLEDO 1999 - Alternator - starter motor
| A | Battery |
| B | Starter |
| C | Alternator |
| C1 | Voltage regulator |
| D | Ignition/starter switch |
| E1 | Lighting switch |
| J59 | Relief relay for x contact |
| S162 | Fuse -1- (30) in fuse holder/battery |
| S163 | Fuse -2- (30) in fuse holder/battery |
| S176 | Fuse -4- (30), in fuse holder/battery |
| S177 | Fuse -5- (30), in fuse holder/battery |
| S229 | Fuse in fuse box |
| T2k | 2 pin connector, on the engine |
| T4l | 4 pin connector, on the engine |
| T6l | 6 pin connector, brown, on the protective housing, on the water case, left side |
| T17 | 17 pin connector, light switch |
| 500 | Screw connection -1- (30), on relay plate |
| 501 | Screw connection -2- (30), on relay plate |
| 502 | Screw connection -1- (30a), on relay plate |
| A2 | Positive (+) connection (15), in dash panel wiring loom |
| A32 | Positive connection (30), in dash panel wiring loom |
| * | Only in vehicles with air conditioning |
| ** | Only in vehicles with additional heating |
Wiring Diagram SEAT TOLEDO 1999 - Control unit of the direct diesel injection - kick-down switch - idle switch - accelerator position transmitter - incandescent spark plugs - engine
| F8 | Kick-down switch |
| F60 | Idling switch (00516-2121) |
| G79 | Accelerator position sender (00777-3131) |
| J52 | Glow plug relay (01266-4111) |
| J248 | Control unit for Diesel direct injection system |
| J279 | Relay for fan V7 and V35 - first speed |
| J317 | Voltage supply relay - terminal 30 (01054) |
| Q6 | Glow plugs - (engine) |
| T2j | 2 pin connector, engine compartment |
| T6l | 6 pin connector, brown, on the protective housing, on the water case, left side |
| T6m | 6 pin connector, on the accelerator pedal |
| T10 | 10 pin connector, orange, in the protective body of connections, in the water case, left side |
| T10a | 10 pin connector, in the cable channel, left side |
| T10h | 10 pin connector, blue, in the protective body of connections, in the water case, left side |
| T80 | 80 pin connector |
| 220 | Earth connection (sender earth), in engine wiring loom |
| 504 | Screw connection -1- (87), on relay plate |
| A104 | Positive connection -2- (15), in dash panel wiring harness |
Wiring Diagram SEAT TOLEDO 1999 - Control unit of the direct diesel injection - coolant temperature transmitter - air volume measurer - adm. tube pressure transmitter - adm. tube temperature transmitter - engine revolutions transmitter
| G2 | Coolant temperature sender (01039) |
| G28 | Engine speed sender (00513-2111) |
| G62 | Sender for coolant temperature (00522-2312) |
| G70 | Air mass meter (00553-2324) |
| G71 | Intake manifold pressure sender (00519-2222) |
| G72 | Intake manifold temperature sender (00527-2412) |
| J248 | Control unit for Diesel direct injection system |
| T3d | 3 pin connector, near the admission tube |
| T10a | 10 pin connector, in the cable channel, left side |
| T10d | 10 pin connector, green, in the protective body of connections, in the water case, left side |
| T80 | 80 pin connector |
| 156 | Earth connection, in Diesel direct injection wiring loom |
| 200 | Earth connection (screening), in engine compartment wiring loom |
| 220 | Earth connection (sender earth), in engine wiring loom |
Wiring Diagram SEAT TOLEDO 1999 - Control unit of the direct diesel injection system - needle run transmitter - fuel temperature transmitter - adjuster slide run transmitter - dosing unit
| E35 | Switch for air conditioner |
| G80 | Needle lift sender (00542-2211) |
| G81 | Fuel temperature sender (00539-2311) |
| G149 | Modulating piston movement sender (00765-1412) |
| J248 | Control unit for Diesel direct injection system |
| J255 | Control unit for Climatronic |
| J293 | Radiator fan control unit |
| N146 | Quantity adjuster (01268-4113) |
| T2t | 2 pin connector on the engine, front |
| T8l | 8 pin connector |
| T10 | 10 pin connector, orange, in the protective body of connections, in the water case, left side |
| T10d | 10 pin connector, green, in the protective body of connections, in the water case, left side |
| T10u | 10 pin connector, in the engine compartment, left side |
| T10y | 10 pin connector, on the engine, front |
| T12e | 12 pin connector |
| T16b | 16 pin connector |
| T80 | 80 pin connector |
| 200 | Earth connection (screening), in engine compartment wiring loom |
| F25 | Connection -1-, in Diesel direct injection system wiring loom |
Wiring Diagram SEAT TOLEDO 1999 - Control unit of the direct diesel injection - admission tube trap switch valve - exhaust gas recirculation valve - load pressure limitation magnetic valve - injection initiation valve
| J104 | Control unit for ABS with EDS |
| J104a | Control unit for ABS with EDS, TCS and ESP |
| J248 | Control unit for Diesel direct injection system |
| N18 | EGR valve (01265-4312) |
| N75 | Solenoid valve for charge pressure control (01262-4442) |
| N108 | Commencement of injection valve (01269-4114) |
| N109 | Fuel cut off valve (01237-4321) |
| N239 | Intake manifold flap change-over valve (01282) |
| S234 | Fuse in fuse box |
| T2p | 2 pin connector |
| T6l | 6 pin connector, brown, on the protective housing, on the water case, left side |
| T10 | 10 pin connector, orange, in the protective body of connections, in the water case, left side |
| T10a | 10 pin connector, in the cable channel, left side |
| T10d | 10 pin connector, green, in the protective body of connections, in the water case, left side |
| T10y | 10 pin connector, on the engine, front |
| T25 | 25 pin connector |
| T47 | 47 pin connector |
| T80 | 80 pin connector |
| A100 | Connection -2- (87), in dash panel wiring harness |
| E30 | Connection (87a), in engine wiring loom |
| * | Only in vehicles with M.F.A. |
Wiring Diagram SEAT TOLEDO 1999 - Control unit of the direct diesel injection system - speed regulator switch (GRA) - clutch switch - brake light switch - brake pedal switch
| E45 | CCS switch (00671) |
| E227 | CCS button (Set) |
| F | Brake light switch (00526-2131) |
| F36 | Clutch pedal switch (00650) |
| F47 | Brake pedal switch for CC/diesel direct injection system (00629) |
| J248 | Control unit for Diesel direct injection system |
| S13 | Fuses in fuse box |
| T10d | 10 pin connector, green, in the protective body of connections, in the water case, left side |
| T10e | 10 pin connector, black, in the protective body of connections, in the water case, left side |
| T10s | 10 pin connector, next to the steering column, right side |
| T80 | 80 pin connector |
| A98 | Positive connection -4- (30), in dash panel wiring harness |
| B131 | Connection (54), in interior wiring loom |
| * | Only in vehicles with manual gearbox |
Wiring Diagram SEAT TOLEDO 1999 - Control unit of the direct diesel injection system - incandescence spark plug - coolant
| J248 | Control unit for Diesel direct injection system |
| J359 | Low heat output relay (01193) |
| J360 | High heat output relay (01194) |
| Q7 | Heating elements (coolant) |
| T6l | 6 pin connector, brown, on the protective housing, on the water case, left side |
| T10 | 10 pin connector, orange, in the protective body of connections, in the water case, left side |
| T80 | 80 pin connector |
| 10 | Earth point, in plenum chamber |
| 156 | Earth connection, in Diesel direct injection wiring loom |
| A27 | Connection (speed signal), in dash panel wiring loom |
| D50 | Positive connection (30), in engine compartment wiring loom |
| D74 | Connection (86), in engine compartment wiring loom |
| D98 | Connection (glow plugs), in engine compartment wiring loom |
| * | Only vehicles with additional heating |
| ** | Only in vehicles without additional heating |
Wiring Diagram SEAT TOLEDO 1999 - Fuel level indicator transmitter - insufficient coolant indicator transmitter
| G | Fuel gauge sender |
| G32 | Coolant shortage indicator sender |
| S5 | Fuses in fuse box |
| S232 | Fuse in fuse box |
| S243 | Fuse in fuse box |
| T6l | 6 pin connector, brown, on the protective housing, on the water case, left side |
| T10a | 10 pin connector, in the cable channel, left side |
| 269 | Earth connection (sender earth) -1-, in dash panel wiring harness |
| A20 | Connection (15a), in dash panel wiring loom |
| A71 | Connection (86), in dash panel wiring loom |
| B168 | Connection (86), in interior wiring harness |
Wiring Diagram SEAT TOLEDO 1999 - Dashboard - oil pressure switch - optical and acoustic control of the oil pressure - speedometer transmitter - coolant temperature warning light - pre-heating time warning light
| F1 | Oil pressure switch |
| G22 | Speedometer sender (01086) |
| H11 | Oil pressure warning buzzer |
| J285 | Control unit with display unit in dash panel insert (01317) |
| K2 | Alternator warning lamp |
| K3 | Oil pressure warning lamp (00755) |
| K28 | Warning lamp for coolant temperature/coolant shortage |
| K29 | Glow period warning lamp (00626) |
| S2 | Fuses in fuse box |
| T10a | 10 pin connector, in the cable channel, left side |
| T32 | 32 pin connector, blue, in the dashboard |
| T32a | 32 pin connector, green, in the dashboard |
| 12 | Earth point, in engine compartment, left |
| 503 | Screw connection -2- (75x), on relay plate |
| B163 | Positive connection -1- (15), in interior wiring harness |
Wiring Diagram SEAT TOLEDO 1999 - Dashboard - coolant temperature indicator - fuel level indicator - multi-function indicator - exterior temperature indicator - rev. counter
| E86 | Call-up button for multi-function indicator |
| E109 | Memory switch for multi-function indicator |
| G1 | Fuel gauge (00664) |
| G3 | Coolant temperature gauge |
| G5 | Rev. counter (00662) |
| J119 | Multi-function indicator |
| J285 | Control unit with display unit in dash panel insert (01317) |
| K105 | Reserve fuel warning lamp (01082) |
| T6d | 6 pin connector |
| T12d | 12 pin connector, in the Climatronic |
| T32 | 32 pin connector, blue, in the dashboard |
| T32a | 32 pin connector, green, in the dashboard |
| A27 | Connection (speed signal), in dash panel wiring loom |
| * | Only in vehicles with M.F.A. |
Can't find your car? Check -> DiagnostData.com!
Русский
