AUDI A3 2000 – Four-speed automatic gearbox with selector lever lock . Wiring diagrams, Pin Connector, Location

Wiring Diagram AUDI A3 2000 - Four-speed automatic gearbox with selector lever lock

D	Ignition/starter switch
E18	Rear fog light switch
J217	Automatic gearbox control unit
J218	Combi-processor in dash panel insert
L19	Gear selector light bulb
N110	Selector lever lock solenoid
T10b	10-pin connector, grey, in plenum chamber
T16	16-pin connector, black, in centre console compartment (diagnosis connector)
T32	32-pin connector, blue, on dash panel insert
T32a	32-pin connector, green, on dash panel insert
Y6	Selector lever position indicator
249	Earth connection -2-, in interior wiring harness
A2	Positive (+) connection (15), in dash panel wiring harness
A76	Connection (diagnosis wire K), in dash panel wiring harness
A109	Connection (selector lever position display), in dash panel wiring harness
B145	Positive (+) connection (58b), in interior wiring harness
U2	Connection -1- (15), in automatic gearbox wiring harness
U4	Connection (30), in automatic gearbox wiring harness

Wiring Diagram AUDI A3 2000 - Four-speed automatic gearbox with selector lever lock

E87	Control and display unit for air conditioner
F8	Kick-down switch
F125	Multi-function switch
J217	Automatic gearbox control unit
J220	Motronic control unit
J248	Diesel direct injection system control unit
J361	Simos control unit
T6	6-pin connector, red, in plenum chamber
T10	10-pin connector, white, in plenum chamber
T10a	10-pin connector, green, in plenum chamber
T10p	10-pin connector, behind dash panel, right
10	Earth point, in plenum chamber
85	Earth connection -1-, in engine compartment wiring harness
D84	Connection (automatic gearbox), in engine compartment wiring harness
*	Does not apply to engine code AGR
**	Applies to engine code AGR only
***	Applies to engine code AEH only
****	Applies to engine codes AGN, AGU only
*****	Only models with air conditioner

Wiring Diagram AUDI A3 2000 - Four-speed automatic gearbox with selector lever lock

E45	Cruise control system switch
G38	Gearbox speed sender
G68	Vehicle speed sender (inductive sender, 2 connections)
G93	Gearbox oil temperature sender
J217	Automatic gearbox control unit
N88	Solenoid valve 1
N89	Solenoid valve 2
N90	Solenoid valve 3
N91	Solenoid valve 4
N92	Solenoid valve 5
N93	Solenoid valve 6
N94	Solenoid valve 7
T3	3-pin connector, on gearbox
T7	7-pin connector, behind steering column switch trim
T10b	10-pin connector, grey, in plenum chamber
*	Only models with cruise control system

Wiring Diagram AUDI A3 2000 - Four-speed automatic gearbox with selector lever lock

B	Starter
D	Ignition/starter switch
J217	Automatic gearbox control unit
J220	Motronic control unit
J226	Starter inhibitor and reversing light relay
J361	Simos control unit
M16	Reversing light bulb, left
M17	Reversing light bulb, right
T6	6-pin connector, red, in plenum chamber
T10	10-pin connector, white, in plenum chamber
T10a	10-pin connector, green, in plenum chamber
T10b	10-pin connector, grey, in plenum chamber
85	Earth connection -1-, in engine compartment wiring harness
A87	Connection (RL), in dash panel wiring harness
A98	Positive (+) connection -4- (30a), in dash panel wiring harness
B149	Positive (+) connection -2- (15a), in interior wiring harness
B156	Positive (+) connection -4- (30a), in interior wiring harness
*	Applies to engine code AGN only
**	Applies to engine code AEH only
**	Applies to engine code AGU only