WIRING DIAGRAM - DOOR MIRROR ADJUSTMENT - Fiat BRAVO 1.4 16v TJet
COMPONENTS - DOOR MIRROR ADJUSTMENT - Fiat BRAVO 1.4 16v TJet
Component code | Description | Reference to the operation |
B002 | JUNCTION UNIT UNDER DASHBOARD | |
B099 | MAXI FUSE BOX ON BATTERY | - |
C020 | PASSENGER SIDE DASHBOARD EARTH | - |
C030 | LEFT REAR EARTH | - |
C038 | EARTH ON CENTRE TUNNEL | - |
D030 | DRIVER'S FRONT DOOR COUPLING | - |
D031 | PASSENGER FRONT DOOR COUPLING | - |
H001 | IGNITION SWITCH | |
H030 | ADJUSTABLE MIRRORS CONTROL | |
M001 | BODY COMPUTER | |
P060 | DRIVER'S DOOR MIRROR | |
P061 | PASSENGER DOOR MIRROR |
COMPONENT LOCATION - DOOR MIRROR ADJUSTMENT - Fiat BRAVO 1.4 16v TJet
Component code | Description | Reference to the operation |
B002 | JUNCTION UNIT UNDER DASHBOARD | |
B099 | MAXI FUSE BOX ON BATTERY | - |
C020 | PASSENGER SIDE DASHBOARD EARTH | - |
C030 | LEFT REAR EARTH | - |
C038 | EARTH ON CENTRE TUNNEL | - |
D030 | DRIVER'S FRONT DOOR COUPLING | - |
D031 | PASSENGER FRONT DOOR COUPLING | - |
H001 | IGNITION SWITCH | |
H030 | ADJUSTABLE MIRRORS CONTROL | |
M001 | BODY COMPUTER | |
P060 | DRIVER'S DOOR MIRROR | |
P061 | PASSENGER DOOR MIRROR |
DESCRIPTION - DOOR MIRROR ADJUSTMENT - Fiat BRAVO 1.4 16v TJet
The door mirrors can be electrically adjusted in two directions using a joystick control located in the door controls on the driver''s side: a selection cursor makes it possible to choose either the left or the right mirror. The button controls two electrical motors located in each of the two mirrors: one motor allows the rotation of the mirror on the horizontal axis, another on the vertical axis.On the version with folding mirrors, another button controls the folding back of the mirrors if required (for example when trying to get through a narrow space).The circuit is supplied by an ignition-operated relay and protected by a fuse in the junction unit under the dashboard.
FUNCTIONAL DESCRIPTION - DOOR MIRROR ADJUSTMENT - Fiat BRAVO 1.4 16v TJet
The controls on the driver''s door H30 include the joystick and control switch for the exterior rear view mirrors:The control H30 receives an ignition-controlled supply (INT), at pin 4, protected by fuse F51 of the junction unit under the dashboard B2; pin 5of H30 is earthed.Control H30 supplies the motors of mirrors P60 and P61 directly:- the shared motor supply signal leaves pins 10 and 11 of H30;- the vertical movement signal leaves pins 2 and 3 of H30;- the horizontal movement signal leaves pins 8 and 9 of H30;On the version with folding mirrors, the mirrors P60 and P61 have a connector B, with pin 3 supplied by the ignition-controled line (INT) protected by fuse F51 of the junction unit under the dashboard B2; pin 4 is earthed, whilst pins 1 and 2 receive a positive and negative for the mirror folding motors from pins 1-6 and 712 of control H30.