WIRING DIAGRAM - CIGAR LIGHTER / CURRENT SOCKET - Fiat BRAVO 1.4 16v TJet
COMPONENTS - CIGAR LIGHTER / CURRENT SOCKET - Fiat BRAVO 1.4 16v TJet
Component code | Description | Reference to the operation |
B002 | JUNCTION UNIT UNDER DASHBOARD | |
B099 | MAXI FUSE BOX ON BATTERY | - |
C030 | LEFT REAR EARTH | - |
C038 | EARTH ON CENTRE TUNNEL | - |
H001 | IGNITION SWITCH | |
P050 | CIGAR LIGHTER/CURRENT SOCKET | |
P052 | REAR CURRENT SOCKET | - |
COMPONENT LOCATION - CIGAR LIGHTER / CURRENT SOCKET - Fiat BRAVO 1.4 16v TJet
Component code | Description | Reference to the operation |
B002 | JUNCTION UNIT UNDER DASHBOARD | |
B099 | MAXI FUSE BOX ON BATTERY | - |
C030 | LEFT REAR EARTH | - |
C038 | EARTH ON CENTRE TUNNEL | - |
H001 | IGNITION SWITCH | |
P050 | CIGAR LIGHTER/CURRENT SOCKET | |
P052 | REAR CURRENT SOCKET | - |
DESCRIPTION - CIGAR LIGHTER / CURRENT SOCKET - Fiat BRAVO 1.4 16v TJet
There is a standard type current socket in the middle of the dashboard in front of the tunnel console which can be used for the cigar lighter or for connecting instruments or equipment operating on 12 V.The boot compartment contains a second power point similar to the first.The cigar lighter heater coil can be placed in the front socket of the console; simply press the knob to operate it: after a few seconds it will come out automatically, ready for use.The ring around the first socket lights up when the side lights are on.The sockets are equipped with a thermal protection device: this protection cuts off the power supply if devices that absorb a lot of energy are connected.The circuit for each of the two current sockets is protected by a dedicated fuse and controlled by the ignition-operated exclusion relay located in the junction unit under the dashboard.
FUNCTIONAL DESCRIPTION - CIGAR LIGHTER / CURRENT SOCKET - Fiat BRAVO 1.4 16v TJet
The current socket / cigar lighter P050 receives an ignition-operated supply (INT/A) from relay T12 protected by fuse F44 both housed in the junction unit under the dashboard B2.The rear current socket P52 is supplied in exactly the same way as the front one.