Wiring diagram - PETROL ENGINES ELECTRONIC MANAGEMENT - Fiat DOBLO 1.6 16v da 12/03
COMPONENTS - PETROL ENGINES ELECTRONIC MANAGEMENT - Fiat DOBLO 1.6 16v da 12/03
Component code | Name | Assembly reference |
A30 | Ignition ''coil | |
B1 | Engine compartment junction unit | - |
B1 | Engine compartment junction unit | |
B1 | Engine compartment junction unit | |
B1 | Engine compartment junction unit | |
B2 | Junction unit under dashboard | - |
B2 | Junction unit under dashboard | |
C15 | Facia earth, driver''s side | - |
C30 | Left rear earth | - |
C40 | Earth on engine | - |
C60 | Injection ECU earth | - |
D4 | Front/engine coupling | - |
D36 | Rear right door connection | - |
D81 | Injector junction | - |
E50 | Instrument panel | - |
E50 | Instrument panel | |
I30 | Brake pedal switch | - |
I50 | Inertial switch | |
K15 | Lambda sensor on pre-catalyzer | |
K17 | Lambda sensor on catalyzer | |
K30 | Insufficient engine oil pressure (switch) sensor | |
K39 | Lambda sensor - 2 | - |
K40 | Lambda sensor | - |
K43 | Integrated air temperature sensor | |
K45 | Engine temperature sensor for i.e. | |
K46 | RPM sensor | |
K47 | Timing sensor | - |
K50 | Detonation sensor | - |
K55 | Accelerator pedal potentiometer | - |
K56 | Throttle position sensor | 1056A |
K84 | Speedometer sensor | |
L10 | Fuel vapour recovery solenoid | |
M1 | Body computer | - |
M1 | Body computer | |
M10 | Engine management ECU | |
N40 | Fuel pump and sender unit | |
N70 | Injector | |
N70 | Injector | |
N70 | injector | |
N70 | injector | |
N74 | Idle actuator | - |
N75 | Integrated throttle body actuator |
Location of components - PETROL ENGINES ELECTRONIC MANAGEMENT - Fiat DOBLO 1.6 16v da 12/03
COMPONENTS - PETROL ENGINES ELECTRONIC MANAGEMENT - Fiat DOBLO 1.6 16v da 12/03
Component code | Name | Assembly reference |
A30 | Ignition ''coil | |
B1 | Engine compartment junction unit | - |
B1 | Engine compartment junction unit | |
B1 | Engine compartment junction unit | |
B1 | Engine compartment junction unit | |
B2 | Junction unit under dashboard | - |
B2 | Junction unit under dashboard | |
C15 | Facia earth, driver''s side | - |
C30 | Left rear earth | - |
C40 | Earth on engine | - |
C60 | Injection ECU earth | - |
D4 | Front/engine coupling | - |
D36 | Rear right door connection | - |
D81 | Injector junction | - |
E50 | Instrument panel | - |
E50 | Instrument panel | |
I30 | Brake pedal switch | - |
I50 | Inertial switch | |
K15 | Lambda sensor on pre-catalyzer | |
K17 | Lambda sensor on catalyzer | |
K30 | Insufficient engine oil pressure (switch) sensor | |
K39 | Lambda sensor - 2 | - |
K40 | Lambda sensor | - |
K43 | Integrated air temperature sensor | |
K45 | Engine temperature sensor for i.e. | |
K46 | RPM sensor | |
K47 | Timing sensor | - |
K50 | Detonation sensor | - |
K55 | Accelerator pedal potentiometer | - |
K56 | Throttle position sensor | 1056A |
K84 | Speedometer sensor | |
L10 | Fuel vapour recovery solenoid | |
M1 | Body computer | - |
M1 | Body computer | |
M10 | Engine management ECU | |
N40 | Fuel pump and sender unit | |
N70 | Injector | |
N70 | Injector | |
N70 | injector | |
N70 | injector | |
N74 | Idle actuator | - |
N75 | Integrated throttle body actuator |
Description - PETROL ENGINES ELECTRONIC MANAGEMENT - Fiat DOBLO 1.6 16v da 12/03
An electronic management system supervises and governs all engine parameters. It optimises performance and fuel consumption by responding in real time to different service conditions.The system is managed by a single control unit which controls both the ignition and the injection.
Functional description - PETROL ENGINES ELECTRONIC MANAGEMENT - Fiat DOBLO 1.6 16v da 12/03
The engine control unit M10 monitors and controls the entire electronic ignition and injection system.The control unit M10 is supplied directly by the battery at pin 16 of connector A, via a line protected by fuse F18 of the engine bay control unit B01 .The supply controlled by the ignition (15/54) reaches pins 12 and 29 of connector A of M10 from the line protected by fuse F16 of the engine compartment unit B01 .