Wiring diagram - DIESEL ENGINES ELECTRONIC MANAGEMENT - Fiat DOBLO 1.3 JTD 16V Fino a 10/2000
COMPONENTS - DIESEL ENGINES ELECTRONIC MANAGEMENT - Fiat DOBLO 1.3 JTD 16V Fino a 10/2000
| Component code | Name | Assembly reference |
| A40 | Heater plugs | - |
| A40 | Heater plugs | |
| B1 | Engine compartment junction unit | - |
| B1 | Engine compartment junction unit | |
| B1 | Engine compartment junction unit | |
| B2 | Junction unit under dashboard | - |
| B2 | Junction unit under dashboard | |
| B37 | Spark plugs (MAXI FUSE) fuse | - |
| B37 | Spark plugs (MAXI FUSE) fuse | |
| C1 | Battery earth | - |
| C10 | Front left earth | - |
| C15 | Facia earth, driver''s side | - |
| C30 | Left rear earth | - |
| C60 | Earth on engine | - |
| C60 | Injection ECU earth | - |
| D4 | Front/engine coupling | - |
| D4 | Front/engine coupling | |
| D4 | Front/engine coupling | |
| D36 | Rear right door connection | - |
| E50 | Instrument panel | - |
| E50 | Instrument panel | |
| I30 | Brake pedal switch | - |
| I31 | Clutch pedal switch | |
| I50 | Inertial switch | |
| K100 | Fuel heating resistance and temperature sensor | |
| K30 | Insufficient engine oil pressure (switch) sensor | - |
| K30 | Insufficient engine oil pressure (switch) sensor | |
| K30 | Insufficient engine oil pressure (switch) sensor | |
| K31 | Water in diesel filter sensor | |
| K41 | Air flow meter | |
| K41 | Air flow meter'' | |
| K45 | Coolant temperature sender unit | |
| K45 | Engine temperature sensor for i.e. | |
| K46 | RPM sensor | |
| K46 | Rpm sensor | |
| K47 | Timing sensor | - |
| K47 | Timing sensor | |
| K55 | Accelerator pedal potentiometer | - |
| K55 | Accelerator pedal potentiometer | |
| K81 | Fuel temperature sensor | |
| K82 | Turbocharging sensor | |
| K82 | Turbocharging sensor | |
| K83 | Fuel pressure sensor | |
| K84 | Speedometer sensor | - |
| K84 | Speedometer sensor | |
| L30 | EGR solenoid valve | |
| L30 | EGR solenoid | |
| L35 | Waste-gate solenoid valve | |
| L62 | Butterfly casing solenoid valve | - |
| M1 | Body computer | - |
| M1 | Body computer | |
| M10 | Engine management ECU | |
| M10 | Engine management control unit | - |
| M10 | Engine management control unit | |
| M10 | Plug preheating control unit | |
| M15 | Heater plugs controlunit | |
| M15 | Plug preheating control unit | |
| M15 | Plug preheating control unit | |
| M15 | Plug preheating control unit | |
| M19 | Methane injection control unit | - |
| N40 | Fuel pump and sender unit | |
| N41 | EPIC injection pump | |
| N77 | Fuel pressure regulator | |
| O20 | Diesel preheating resistor | 1044D |
Location of components - DIESEL ENGINES ELECTRONIC MANAGEMENT - Fiat DOBLO 1.3 JTD 16V Fino a 10/2000
COMPONENTS - DIESEL ENGINES ELECTRONIC MANAGEMENT - Fiat DOBLO 1.3 JTD 16V Fino a 10/2000
| Component code | Name | Assembly reference |
| A40 | Heater plugs | - |
| A40 | Heater plugs | |
| B1 | Engine compartment junction unit | - |
| B1 | Engine compartment junction unit | |
| B1 | Engine compartment junction unit | |
| B2 | Junction unit under dashboard | - |
| B2 | Junction unit under dashboard | |
| B37 | Spark plugs (MAXI FUSE) fuse | - |
| B37 | Spark plugs (MAXI FUSE) fuse | |
| C1 | Battery earth | - |
| C10 | Front left earth | - |
| C15 | Facia earth, driver''s side | - |
| C30 | Left rear earth | - |
| C60 | Earth on engine | - |
| C60 | Injection ECU earth | - |
| D4 | Front/engine coupling | - |
| D4 | Front/engine coupling | |
| D4 | Front/engine coupling | |
| D36 | Rear right door connection | - |
| E50 | Instrument panel | - |
| E50 | Instrument panel | |
| I30 | Brake pedal switch | - |
| I31 | Clutch pedal switch | |
| I50 | Inertial switch | |
| K100 | Fuel heating resistance and temperature sensor | |
| K30 | Insufficient engine oil pressure (switch) sensor | - |
| K30 | Insufficient engine oil pressure (switch) sensor | |
| K30 | Insufficient engine oil pressure (switch) sensor | |
| K31 | Water in diesel filter sensor | |
| K41 | Air flow meter | |
| K41 | Air flow meter'' | |
| K45 | Coolant temperature sender unit | |
| K45 | Engine temperature sensor for i.e. | |
| K46 | RPM sensor | |
| K46 | Rpm sensor | |
| K47 | Timing sensor | - |
| K47 | Timing sensor | |
| K55 | Accelerator pedal potentiometer | - |
| K55 | Accelerator pedal potentiometer | |
| K81 | Fuel temperature sensor | |
| K82 | Turbocharging sensor | |
| K82 | Turbocharging sensor | |
| K83 | Fuel pressure sensor | |
| K84 | Speedometer sensor | - |
| K84 | Speedometer sensor | |
| L30 | EGR solenoid valve | |
| L30 | EGR solenoid | |
| L35 | Waste-gate solenoid valve | |
| L62 | Butterfly casing solenoid valve | - |
| M1 | Body computer | - |
| M1 | Body computer | |
| M10 | Engine management ECU | |
| M10 | Engine management control unit | - |
| M10 | Engine management control unit | |
| M10 | Plug preheating control unit | |
| M15 | Heater plugs controlunit | |
| M15 | Plug preheating control unit | |
| M15 | Plug preheating control unit | |
| M15 | Plug preheating control unit | |
| M19 | Methane injection control unit | - |
| N40 | Fuel pump and sender unit | |
| N41 | EPIC injection pump | |
| N77 | Fuel pressure regulator | |
| O20 | Diesel preheating resistor | 1044D |
Description - DIESEL ENGINES ELECTRONIC MANAGEMENT - Fiat DOBLO 1.3 JTD 16V Fino a 10/2000
An electronic management system supervises and governs all engine parameters. It optimises performance and fuel consumption by responding in real time to different service conditions.The Diesel engine is fitted with a Multijet COMMON RAIL njection system. This features the use of high, electronically-controlled injection pressure. Fuel delivery, termed a pilot injection, is optimised by the electronic control unit via the injector and not managed by the pump.
Functional description - DIESEL ENGINES ELECTRONIC MANAGEMENT - Fiat DOBLO 1.3 JTD 16V Fino a 10/2000
Engine control unit M10 monitors and controls the electronic injection system.
