Bauteile - BREMSLEUCHTEN - Fiat DUCATO 2.0 JTD 8V fino a 02/05
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
B002 | VERTEILER UNTER DEM ARMATURENBRETT | - |
C030 | MASSE HINTEN LINKS | - |
C031 | MASSE HINTEN RECHTS | - |
C080 | MASSE HECKLEUCHTE RECHTS | - |
C081 | MASSE HECKLEUCHTE LINKS | - |
D025 | VERBINDUNG ARMATURENBRETT/HINTEN LINKS | - |
D026 | VERBINDUNG ARMATURENBRETT / HINTEN RECHTS | - |
D097 | KURZSCHLUSSVERBINDUNG | - |
D171 | VERBINDUNG HINTEN RECHTS/KOFFERRAUM | - |
F030 | HECKLEUCHTE LINKS | |
F031 | HECKLEUCHTE RECHTS | |
F040 | ZUSATZBREMSLEUCHTE HINTEN (DRITTES STOPPLICHT) | |
I030 | BREMSPEDALSCHALTER | - |
- | ||
- | ||
- | ||
- | ||
- | ||
- | ||
- |
Einbaulage Bauteile - BREMSLEUCHTEN - Fiat DUCATO 2.0 JTD 8V fino a 02/05
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
B002 | VERTEILER UNTER DEM ARMATURENBRETT | - |
C030 | MASSE HINTEN LINKS | - |
C031 | MASSE HINTEN RECHTS | - |
C080 | MASSE HECKLEUCHTE RECHTS | - |
C081 | MASSE HECKLEUCHTE LINKS | - |
D025 | VERBINDUNG ARMATURENBRETT/HINTEN LINKS | - |
D026 | VERBINDUNG ARMATURENBRETT / HINTEN RECHTS | - |
D097 | KURZSCHLUSSVERBINDUNG | - |
D171 | VERBINDUNG HINTEN RECHTS/KOFFERRAUM | - |
F030 | HECKLEUCHTE LINKS | |
F031 | HECKLEUCHTE RECHTS | |
F040 | ZUSATZBREMSLEUCHTE HINTEN (DRITTES STOPPLICHT) | |
I030 | BREMSPEDALSCHALTER | - |
- | ||
- | ||
- | ||
- | ||
- | ||
- | ||
- |
Beschreibung - BREMSLEUCHTEN - Fiat DUCATO 2.0 JTD 8V fino a 02/05
Die Bremsleuchten befinden sich hinten in den seitlichen Leuchten.Sie werden immer eingeschaltet, wenn uber das Bremspedal der Schalter am Pedal betatigt wird.Der Schaltkreis wird mit Schlussel auf MAR versorgt und durch eine spezifische Sicherung abgesichert, die sich im Verteiler unter dem Armaturenbrett befindet. Das Bremssignal wird auch von der ABS-Anlage und dem CRUISE CONTROL-System erfasst.
Funktionsbeschreibung - BREMSLEUCHTEN - Fiat DUCATO 2.0 JTD 8V fino a 02/05
Das Aktivierungssignal fur die Bremsleuchten kommt vom Schalter I030, der "hinter dem Zundschlussel" durch die Verbindung mit den Zundschalter H001 und den Pin 1 des Steckers B vom Verteiler mit Sicherungen unter dem Armaturenbrett B002 versorgt wird. Die Leitung wird uber die Sicherung F26 in diesem Verteiler geschutzt.Wird das Bremspedal gedruckt, entsteht zwischen Pin 4 und Pin 2 des Bremspedalschalters I030 ein Kurzschluss, der das Signal an die Kurzschlussverbindung D097B, Pin 1, liefert. Die Kurzschlussverbindung verteil das Signal und steuert die Bremsleuchten an, die sich in den Ruckleuchten F030 und F031 befinden.