Description The standard type current socket which can be used for connecting instruments or equipment that operate on 12 V is located in the tunnel console next to the handbrake. The socket ring nut is lit up when the side lights are on 2399217SeeE2530INSTRUMENT LIGHTING . Also on the tunnel console, behind towards the rear seats, there is a second current socket, similar to the previous one.A third additional current socket is available on request in the luggage compartment, the same type as the previous ones.The power sockets all have a heat protection device: if devices with high energy absorption are connected, this protection cuts off the supply.The circuit for the two current sockets on the console is protected by a special fuse and is operated by the relay which is excluded when the ignition is switched on and is located in the junction unit. These sockets work with the ignition switched ON (INT/A) to prevent the battery from being run down. The circuit for the rear current socket, on the other hand, is protected by a dedicated fuse and operated by the services relay for the control unit under the dashboard: the power supply is available both with the ignition ON and with the ignition OFF: during starting, this relay is temporarily deactivated, whilst with the ignition OFF, the Body Computer keeps the relay activated for 3 minutes, but deactivates it 30 seconds after one of the doors is opened. The cigar lighter resistance can also be located in the front socket in the console, to operate it simply press the knob: after a few seconds it pops out automatically, ready for use. This resistance is only supplied on request, in a 'smokers kit' comprising, in addition to the cigar lighter, a removable ashtray in the shape of a glass that is placed in the glass holder.
Functional description The current socket/cigar lighter P50 and the one of the tunnel P51 are supplied by the line controlled by the ignition (INT/A) of relay T12 protected by fuse F44, both contained in the unit under the dashboard B2. Lighting for cigar lighter P50 is activated by Body Computer M1 - pin 40 of connector E. 2399217SeeE2530INSTRUMENT LIGHTING The rear current socket P52 is supplied by the line controlled by relay T13 and protected by fuse F44, both contained in the junction unit under the dashboard B2. The services relay T13 is energized with the logic described above and controlled by the Body Computer M1 pin 14 of connector F.
0Removing201Refitting212400802-7040A37fuse box cover - r r1. Disconnect the electrical connections (1a, 1b, 1c, 1d, 1e, 1f).2. Undo the bracket retaining bolt.3. Slightly move the bracket (3a) for the dashboard trim and undothe bolt (3b).4. Undo the other bolts securing the body computer/junction unit.5. Slightly move the body computer/junction unit assembly.6. Disconnect the electrical connections (6a, 6b, 6c).7. Recover the body computer/junction unit.2050752
0Removing201Refitting211. Disconnect electronic control unit electrical connections (1a),(1b), (1c).2. Undo the bolts.3. Recover the control unit.2050753
0Removing201Refitting211. Disconnect electronic control unit electrical connections (1a),(1b), (1c).2. Undo the bolts.3. Recover the control unit.2050754
0Removing201Refitting211. Open the tabs.2. Undo the bolts.3. Remove the grab handle.2051235
7065C34
0Removing201Refitting21Lower the sun visor.1. Disconnect the sun visor (1a) from the handle (1b).2. Undo the bolts.3. Remove the sun visor releasing the retainer (3a).4. Remove the handle releasing the centering device (4a).2051236
7065C60
0Removing201Refitting212400932-7065C34l/h or r/h sun blind(one) - r+r (right and left) 2400816-7040E10front courtesy light - r+r2400821-7040H08oddment shelf on roof trim r r1. Remove the upper panel by undoing the inner retainers.2. Disconnect the electrical connection.3. Remove the lower panel (3a) by undoing retainers (3b).4. Raise mount (4a) of the rear view mirror (by striking from beneath)and withdraw from plate (4b) secured to the glass. 5. Disconnect the electrical connection from the rain/dusk sensor.6. Recover the rear view mirror with mount.2051237
7065C62
0Removing201Refitting211. Lower mirror.2. Release mirror from spherical seat.2051238
7065C68
0Removing201Refitting211. Raise mirror mount (1a) by lifting out of retaining block (1b)secured to the glass. 2051239
7065C69
0Removing201Refitting21This procedure provides instructionsfor refitting the plate. When correctly secured, the plate can nolonger be detached from the glass. 23
7065C72
0Removing201Refitting212400395-3380A44handbrake/linkage protection- r+r1. Take out the ashtray.2. Withdraw the cigarette lighter seating (2a) using the specialtool (2b).23The tool must engage in the recesses(2c) in the cigarette lighter seating.2051241
7065C85
0Removing201Refitting211. Release and open the cover.2. Withdraw the cigarette lighter seating (2a) using the specialtool (2b).23The tool must engage in the recesses(2c) in the cigarette lighter seating.3. Disconnect the electrical connection.2051243
7065C86
0Removing201Refitting21Open the tailgate.1. Release and open the cover.2. Withdraw the cigarette lighter seating (2a) using the specialtool (2b).23The tool must engage in the recesses(2c) in the cigarette lighter seating.3. Disconnect the electrical connection.2051245