Fiat STILO 1.2 16v Fino a 04/2005 – TYRE INFLATION PRESSURE CONTROL SYSTEM – – WIRING DIAGRAM, LOCATION COMPONENTS, OPERATIONAL DESCRIPTION – WIRING DIAGRAM, LOCATION COMPONENTS, OPERATIONAL DESCRIPTION
DescriptionThere is a sensor on each tyre valve that measures the pressure and temperature of the actual tyre: this signal is transmitted via RF to an aerial, incorporated in the electronic control unit which manages and controls the system: the control unit sends this information to the Body Computer via the serial line: the 'insufficient pressure' signal for the tyre concerned is sent via the CAN to the instrument panel which activates the appropriate signals.The control unit supply lines are protected by special fuses in the underdashboard control unit.
Functional description The control unit M47 is supplied at pin 8 directly from the battery by the line protected by maxifuse F39 of the underdashboard control unit B2 . The supply controlled by the ignition (INT) reaches pin 5 from the line protected by fuse F51 of the underdashboard control unit B2 . The control unit is earthed at pin 7. The serial line connected to the Body Computer M1 leaves from pin 3 of M47 . Self-diagnostic data can be read by connecting to connector C of Body Computer M1 - pin 1: it receives signals from pin 4 of the control unit M47 via the special diagnostic line. 3361166SeeE8010DIAGNOSTIC MULTIPLE CONNECTORThe aerial that receives the signals for the wheel sensors is incorporated in the actual control unit.
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting21Disconnect the negative battery terminal.1. Remove the junction unit protective cover.192009560
5505A35
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting213363098-5530B56BATTERY DRIP TRAY COVER- R.R.Disconnect the battery negative terminal.3363361-7040A44facia lh side cover - r r1. Disconnect the front electrical connectors of the junction unitcomplete with body computer.2. Unscrew the retaining bolts.3. Remove from its seating the junction unit complete with bodycomputer.4. Disconnect the rear electrical connectors of the junction unitcomplete with body computer.2027438
5505A36
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting211. Separate the junction unit (1a) from the body computer (1b),by releasing the retaining lugs (1c).2027440
5505A41
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting213363098-5530B56BATTERY DRIP TRAY COVER- R.R.Disconnect the battery negative terminal.3363151-5580C18air bag module - r+r . 769- 4110A16 steering wheel - r r for replacement or checks forversions with airbag and manual gearbox with hydraulic selection . 1. Disconnect the electrical connectors (1a) and remove the controlunit (1b) from its seating.2027441
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting211. Disconnect the electrical connectors (1a) and (1b).2. Undo the fixing bolts (2a) and remove the door node (2b).2027444
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting213363098-5530B56BATTERY DRIP TRAY COVER- R.R.1. Release the clips and remove the protective cover for the uniton the battery.2. Undo the bolts (2a) and remove the battery fixing bracket (2b).3. Slacken the nut and disconnect the battery's negative terminal.2027495
5530B52
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting21Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.3363098Op. 5530B10 BATTERY - R+R3363096- Disconnect the engine management unit electrical connections.Release the wiring from the retaining bands.1. Undo the rear fixing bolt (1a), release the front fastenings (1b) and place the engine compartment junction unit (1c) at the side.192008351
5530B56
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting211. Undo the fixing bolts (1a) and remove the battery cover (1b).2027502
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting213363098-5530B56BATTERY DRIP TRAY COVER- R.R.Disconnect the battery negative terminal.3363357-7040A26steering column trim - r+r1. Undo the bolts fixing the analogue instrument panel trim.2. Remove the trim under the instrument panel.3. Undo the upper bolts fixing the instrument panel to the dashboard;then partly release the panel.2027547
767 It is not possible toorder a single lock barrel or to order barrels using a single partcode. When ordering barrels, observe the special procedure illustrated 3363161See assembly5580E anti-theft device .
5520A18
<anchor>0</anchor><span>Removing</span><icon><imageid>20</imageid></icon>1Refitting213363098-5530B56BATTERY DRIP TRAY COVER- R.R.Disconnect the battery negative terminal.3363357-7040A26steering column trim - r+r1. Disconnect the electrical connectors of the ignition block (1a)and Cruise Control (1b).2. Release the retaining clips on the ignition switch contact block.2027470
Русский
