Componenti - LUCI STOP - Fiat ULYSSE 2.0 16V JTD da 04/03
Codice componente | Denominazione | Riferimento al complessivo |
B001 | CENTRALINA DI DERIVAZIONE VANO MOTORE | |
B005 | SCATOLA MAXI FUSE | - |
B098 | SCATOLA PORTAFUSIBILI SUPPLEMENTARE | - |
C020 | MASSA PLANCIA LATO PASSEGGERO | - |
C030 | MASSA POSTERIORE SINISTRA | - |
C031 | MASSA POSTERIORE DESTRA | - |
D006 | GIUNZIONE ANTERIORE/POSTERIORE | - |
D085 | GIUNZIONE POSTERIORE / PORTELLONE | - |
F030 | FANALE POSTERIORE SINISTRO | |
F031 | FANALE POSTERIORE DESTRO | |
F040 | FANALE POSTERIORE SUPPLEMENTARE (TERZO STOP) | |
H001 | COMMUTATORE DI ACCENSIONE | |
I030 | INTERRUTTORE PEDALE FRENO | |
M001 | BODY COMPUTER |
Codice componente | Denominazione | Riferimento al complessivo |
B001 | CENTRALINA DI DERIVAZIONE VANO MOTORE | |
B005 | SCATOLA MAXI FUSE | - |
B098 | SCATOLA PORTAFUSIBILI SUPPLEMENTARE | - |
C020 | MASSA PLANCIA LATO PASSEGGERO | - |
C030 | MASSA POSTERIORE SINISTRA | - |
C031 | MASSA POSTERIORE DESTRA | - |
D006 | GIUNZIONE ANTERIORE/POSTERIORE | - |
D085 | GIUNZIONE POSTERIORE / PORTELLONE | - |
F030 | FANALE POSTERIORE SINISTRO | |
F031 | FANALE POSTERIORE DESTRO | |
F040 | FANALE POSTERIORE SUPPLEMENTARE (TERZO STOP) | |
H001 | COMMUTATORE DI ACCENSIONE | |
I030 | INTERRUTTORE PEDALE FRENO | |
M001 | BODY COMPUTER |
Le luci di arresto vettura (luci "stop") sono collocate posteriormente nei fanali laterali e nell''apposito fanale centrale "terzo stop", composto da 10 lampade separate.Esse sono azionate ogni volta che viene premuto il pedale del freno attraverso l''apposito interruttore posto sul pedale stesso.767 sul pedale freno e collocato un secondo interruttore "ridondante" utilizzato in particolare dalla centralina controllo motore e dalla centralina ABS.L''interruttore "base" (I030) e del tipo "normalmente aperto" (alla pressione del pedale, l''interruttore si chiude), mentre l''interruttore "ridondante" (I035) e del tipo "normalmente chiuso" (alla pressione del pedale, il contatto dell''interruttore si apre): in tal modo il sistema verifica la coerenza dell''informazione "pedale premuto".
L’interruttore pedale freno I030 e alimentato, sul pin 1, dalla scatola maxi fuse B005, ed e protetto dal fusibile F31 collocato all’interno della scatola portafusibili supplementari B098.Il comando delle luci stop, proveniente dal pin 2 dell’interruttore pedale freno I030, viene inviato al pin 4 del Nodo body computer M001.A pedale premuto, il Nodo body computer provvede ad alimentare:- dal pin 15 del connettore L, il pin 2 del fanale posteriore sinistro F030;- dal pin 16 del connettore L, il pin 2 del fanale posteriore destro F031;- dal pin 14 del connettore L, il pin 1 del fanale posteriore supplementare (“terzo stop”) F040.