Componenti - LUCI RETROMARCIA - Fiat ULYSSE 2.0 16V JTD da 04/03
Codice componente | Denominazione | Riferimento al complessivo |
A001 | BATTERIA | - |
B001 | CENTRALINA DI DERIVAZIONE VANO MOTORE | |
C010 | MASSA ANTERIORE SINISTRA | - |
C011 | MASSA ANTERIORE DESTRA | - |
C020 | MASSA PLANCIA LATO PASSEGGERO | - |
C030 | MASSA POSTERIORE SINISTRA | - |
C031 | MASSA POSTERIORE DESTRA | - |
F030 | FANALE POSTERIORE SINISTRO | |
F031 | FANALE POSTERIORE DESTRO | |
H001 | COMMUTATORE DI ACCENSIONE | |
I020 | INTERRUTTORE LUCI RETROMARCIA | |
L050 | GRUPPO ELETTROVALVOLE CAMBIO AUTOMATICO | - |
M001 | BODY COMPUTER |
Codice componente | Denominazione | Riferimento al complessivo |
A001 | BATTERIA | - |
B001 | CENTRALINA DI DERIVAZIONE VANO MOTORE | |
C010 | MASSA ANTERIORE SINISTRA | - |
C011 | MASSA ANTERIORE DESTRA | - |
C020 | MASSA PLANCIA LATO PASSEGGERO | - |
C030 | MASSA POSTERIORE SINISTRA | - |
C031 | MASSA POSTERIORE DESTRA | - |
F030 | FANALE POSTERIORE SINISTRO | |
F031 | FANALE POSTERIORE DESTRO | |
H001 | COMMUTATORE DI ACCENSIONE | |
I020 | INTERRUTTORE LUCI RETROMARCIA | |
L050 | GRUPPO ELETTROVALVOLE CAMBIO AUTOMATICO | - |
M001 | BODY COMPUTER |
La vettura e dotata di due luci retromarcia posizionate nei fanali posteriori.Le luci retromarcia vengono azionate ogni volta che viene inserita la retromarcia: e presente un interruttore all’esterno della scatola cambio.Il circuito delle luci retromarcia e alimentato con chiave su M.Il segnale di avvenuto inserimento viene gestito dal Body Computer. L’informazione viene successivamente inoltrata al devioguida (centralina nodo volante) che:- nella condizione di tergicristallo in funzione, attivera il funzionamento automatico del tergilunotto;- attivera lo specchio retrovisore elettrocromico;- abilitera la centralina sensori di parcheggio.
Il comando di inserimento luci retromarcia viene fornito dall’interruttore I020 posizionato sulla scatola cambio.L’interruttore e collegato (pin 1) alla centralina di derivazione vano motore B001 (pin 13 connettore F) alla quale arriva un segnale di massa nel momento in cui viene inserita la retromarcia.A sua volta, la centralina di derivazione vano motore B001 informa, attraverso linea CAN (pin 12 e 11 del connettore F), il Nodo body computer M001 (pin 25 e 27 del connettore E rispettivamente) dell’avvenuta richiesta di inserimento luci retromarcia. Quest’ultimo comandera (pin 15 e 6 connettore H rispettivamente) l’accensione delle luci poste sui fanali posteriori sinistro F030 e destro F031 (pin 4).Inoltre, il Nodo body computer M001, si occupera di informare tutte le centraline interessate all’avvenuto inserimento della retromarcia, tramite rete CAN.Nelle versioni con cambio automatico, l’interruttore luci retromarcia sul cambio I020 non e presente: la stessa funzione viene svolta da un apposito contatto “R” del gruppo elettrovalvole cambio automatico L050.Anche L050 (pin A5) si collega alla centralina di derivazione B001 (pin 15 connettore F).