Schaltplan - RUCKFAHRSCHEINWERFER - Fiat ULYSSE 2.0 16v fino a 04/03
Bauteile - RUCKFAHRSCHEINWERFER - Fiat ULYSSE 2.0 16v fino a 04/03
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
B001 | Verteiler im Motorraum | 5505A |
C011 | Masse vorne rechts | - |
C020 | Masse Armaturenbrett Beifahrerseite | - |
C030 | Masse hinten links | - |
C031 | Masse hinten rechts | - |
F030 | Ruckleuchte links | 5540A |
F031 | Ruckleuchte rechts | 5540A |
M001 | Body Computer | 5505A |
Einbaulage Bauteile - RUCKFAHRSCHEINWERFER - Fiat ULYSSE 2.0 16v fino a 04/03
Bauteile - RUCKFAHRSCHEINWERFER - Fiat ULYSSE 2.0 16v fino a 04/03
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
B001 | Verteiler im Motorraum | 5505A |
C011 | Masse vorne rechts | - |
C020 | Masse Armaturenbrett Beifahrerseite | - |
C030 | Masse hinten links | - |
C031 | Masse hinten rechts | - |
F030 | Ruckleuchte links | 5540A |
F031 | Ruckleuchte rechts | 5540A |
M001 | Body Computer | 5505A |
Beschreibung - RUCKFAHRSCHEINWERFER - Fiat ULYSSE 2.0 16v fino a 04/03
Das Fahrzeug verfugt uber zwei Ruckfahrscheinwerfer, die sich in den Ruckleuchten befinden.Sie werden uber den entsprechenden Schalter au?en am Getriebegehause eingeschaltet, wenn der Ruckwartsgang eingelegt wird.Der Stromkreis der Ruckfahrscheinwerfer wird bei Schlussel auf M versorgt.Das Signal uber das erfolgte Einlegen des RG wird vom Body Computer gesteuert, der diese Information auch dem Knoten Lenkrad sendet
Funktionsbeschreibung - RUCKFAHRSCHEINWERFER - Fiat ULYSSE 2.0 16v fino a 04/03
Der Befehl zum Einschalten der Ruckfahrscheinwerfer kommt vom Schalter I020 auf dem Getriebegehause.Der Schalter erhalt seine Stromversorgung vom Verteiler im Motorraum B001 (Pin 10 des Steckers C) uber die Leitung mit der Sicherung F01 im gleichen Verteiler. Wird der RG eingelegt, schlie?t der Kontakt im Schalter I020 und sendet das Signal an den Knoten Body Computer M001 (Pin 5 des Steckers B).Der Knoten Body Computer M001 steuert von Pin 7 des Steckers H das Einschalten der jeweiligen Lampen in der linken (F030) und rechten (F031) Heckleuchte.Der Knoten Body Computer M001 informiert uber das CAN-Netz die verschiedenen, an Einlegen des RG interessierten Elektroniken.Bei Versionen mit Automatikgetriebe ist der RG-Schalter am Getriebe nicht vorhanden, dessen Funktion wird jedoch durch einen entsprechenden "R"-Kontakt der E-Ventilbaugruppe Automatikgetriebe L050 wahrgenommen.