Schaltplan - NEBELSCHEINWERFER - Fiat ULYSSE 2.0 16v da 04/03
Bauteile - NEBELSCHEINWERFER - Fiat ULYSSE 2.0 16v da 04/03
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
B001 | Verteiler im Motorraum | 5505A |
C010 | Masse vorne links | - |
C011 | Masse vorne rechts | - |
C015 | Masseanschluss Armaturenbrett Fahrerseite | - |
C020 | Masse Armaturenbrett Beifahrerseite | - |
D020 | Verbindung Armaturenbrett/hinten | - |
E050 | Instrumententafel | 5560B |
F010 | Scheinwerfer links | 5540B |
F011 | Scheinwerfer rechts | 5540B |
M001 | Body Computer | 5505A |
M093 | Elektronik Knoten Lenkrad (NVO) | 5550A |
M140 | Elektronik Kontrollleuchten und Kilometerzahler (NSO) | - |
Einbaulage Bauteile - NEBELSCHEINWERFER - Fiat ULYSSE 2.0 16v da 04/03
Bauteile - NEBELSCHEINWERFER - Fiat ULYSSE 2.0 16v da 04/03
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
B001 | Verteiler im Motorraum | 5505A |
C010 | Masse vorne links | - |
C011 | Masse vorne rechts | - |
C015 | Masseanschluss Armaturenbrett Fahrerseite | - |
C020 | Masse Armaturenbrett Beifahrerseite | - |
D020 | Verbindung Armaturenbrett/hinten | - |
E050 | Instrumententafel | 5560B |
F010 | Scheinwerfer links | 5540B |
F011 | Scheinwerfer rechts | 5540B |
M001 | Body Computer | 5505A |
M093 | Elektronik Knoten Lenkrad (NVO) | 5550A |
M140 | Elektronik Kontrollleuchten und Kilometerzahler (NSO) | - |
Beschreibung - NEBELSCHEINWERFER - Fiat ULYSSE 2.0 16v da 04/03
Das Fahrzeug besitzt zwei Zusatzscheinwerfer "Nebelscheinwerfer" in den Scheinwerfern.Die Nebelscheinwerfer werden durch die entsprechende Bedienung mit dem Randelring am Lenksaulenschalter (Knoten Lenkrad) aktiviert. Sind sie eingeschaltet, leuchtet die entsprechende Kontrollleuchte auf dem Armaturenbrett auf.Ein entsprechendes Relais - im Verteiler im Motorraum - steuert das Einschalten der Nebelscheinwerfer uber eine durch eine entsprechende Sicherung geschutzte Leitung.Das Relais wird vom Body Computer verwaltet: Das Relais wird erregt, wenn:
Funktionsbeschreibung - NEBELSCHEINWERFER - Fiat ULYSSE 2.0 16v da 04/03
Der Befehl zum Einschalten der Nebelscheinwerfer kommt vom Knoten Lenkrad M093 zum Knoten Body Computer M001. Das Signal wird uber das CAN-Netz ubertragen, das die beiden Elektroniken verbindet.Der Knoten Lenkrad M093 erhalt die Stromversorgung (Pin 5 des Steckers A) uber die Leitung mit der Sicherung F11, die sich im Knoten Body Computer M001 befindet; Dieser wird uber CAN (Pin 6 des Steckers A) von der mit der Sicherung F16 im Knoten Body Computer M001 geschutzten Leitung mit Strom versorgt.Der Verteiler im Motorraum B001 empfangt uber das CAN-Netz die Anfrage zum Einschalten der Nebelscheinwerfer und erregt das interne Relais, wodurch die entsprechenden Lampen der Nebelscheinwerfer mit Strom versorgt werden (Pin 10 des Steckers F). Die Nebelscheinwerfer befinden sich in der linken (F010) und rechten (F011) Frontleuchte. Die Stromversorgung erfolgt direkt von der Batterie und ist durch die Sicherung F06 im Verteiler im Motorraum B001 geschutzt.Das Aufleuchten der entsprechenden Kontrollleuchte wird vom Knoten Kontrollleuchten Kilometerzahler M140 gesteuert, der uber CAN mit der Instrumententafel E050 und dem Knoten Body Computer M001 kommuniziert.Die Instrumententafel E050 und der Knoten Kontrollleuchten Kilometerzahler erhalten die Stromversorgung uber CAN (Pin 13 von E50 und Pin 4 von M140) von der mit der Sicherung F24 im Body Computer M001 geschutzten Leitung.