Schaltplan - SCHIEBEDACH - Fiat ULYSSE 2.0 16v da 04/03
Bauteile - SCHIEBEDACH - Fiat ULYSSE 2.0 16v da 04/03
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
B005 | Gro?sicherungskasten | - |
B098 | Zusatzverteilerkasten | - |
C020 | Masse Armaturenbrett Beifahrerseite | - |
C031 | Masse hinten rechts | - |
D030 | Verbindung Vordertur links | - |
D042 | Verbindung Deckenleuchten | - |
H051 | Bediengruppe Fensterheber und Au?enspiegel auf der Fahrertur | 7005M |
H061 | Schalter Schiebedach vorne | 7030B |
I120 | Schalter mittleres Schiebedach | - |
I121 | Schalter Schiebedach hinten | - |
I122 | Schalter mittleres und hinteres Schiebedach | 7030B |
M001 | Body Computer | 5505A |
M066 | Turbedienelektronik Fahrerseite (NPG) | 5505A |
N036 | Schiebedachmotor vorne | 5005A |
N155 | Schiebedachmotor Mitte | 7030B |
N156 | Schiebedachmotor hinten | 7030B |
Einbaulage Bauteile - SCHIEBEDACH - Fiat ULYSSE 2.0 16v da 04/03
Bauteile - SCHIEBEDACH - Fiat ULYSSE 2.0 16v da 04/03
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
B005 | Gro?sicherungskasten | - |
B098 | Zusatzverteilerkasten | - |
C020 | Masse Armaturenbrett Beifahrerseite | - |
C031 | Masse hinten rechts | - |
D030 | Verbindung Vordertur links | - |
D042 | Verbindung Deckenleuchten | - |
H051 | Bediengruppe Fensterheber und Au?enspiegel auf der Fahrertur | 7005M |
H061 | Schalter Schiebedach vorne | 7030B |
I120 | Schalter mittleres Schiebedach | - |
I121 | Schalter Schiebedach hinten | - |
I122 | Schalter mittleres und hinteres Schiebedach | 7030B |
M001 | Body Computer | 5505A |
M066 | Turbedienelektronik Fahrerseite (NPG) | 5505A |
N036 | Schiebedachmotor vorne | 5005A |
N155 | Schiebedachmotor Mitte | 7030B |
N156 | Schiebedachmotor hinten | 7030B |
Beschreibung - SCHIEBEDACH - Fiat ULYSSE 2.0 16v da 04/03
Das Fahrzeug kann mit drei elektrischen Schiebedachern ausgestattet werden - vorne, Mitte und hinten - die nur bei Schlussel auf M uber die entsprechenden Bedientasten betatigt werden konnen.Mit dem Schlussel in Stellung S bleiben die Schiebedachbedienungen noch ca. 1 Minute lang aktiv.Die Schiebedacher sind mit verschiebbaren Sonnenblenden und Klemmschutzvorrichtungen ausgestattet. Die Elektronik kann beim Schlie?en der Scheibe uber die Klemmschutzdichtungen ein evtl. vorhandenes Hindernis erkennen: in diesem Fall unterbricht das System augenblicklich die Bewegung der Scheibe und kehrt die Bewegungsrichtung um.
Funktionsbeschreibung - SCHIEBEDACH - Fiat ULYSSE 2.0 16v da 04/03
Die Bediengruppen fur das mittlere (N155) und das hintere (N156) Schiebedach werden an Pin 6 der Leitung mit den Sicherungen F35 bzw. F34 im Zusatzverteiler B098 mit Strom versorgt.Die Bediengruppe des vorderen Schiebedachs N036 erhalt die Stromversorgung immer an Pin 6 vom Knoten Body Computer M001 (Pin 10 des Steckers F) von der durch die Sicherung F09 geschutzte Leitung.Die Pins 1 und 8 von N155, 1 und 7 von N156 und 1 von N036 sind mit Masse verbunden.Uber die Pins 4 und 5 bilden die E-Motoren N036, N155 und N156 eine Schnittstelle zum CAN-Netz, kommunizieren mit dem Knoten Body Computer M001 an den Pin 11 und 13 des Steckers I und erhalten die Stromversorgung uber CAN - an Pin 10 - von der mit der Sicherung F01 des Body Computer M001 geschutzten Leitung.Uber die Schalter H061, I120, I121 und I122 wird das Offnen und Schlie?en der drei Schiebedacher bedient.Der Schalter H061 steuert das Offnen/Schlie?en des vorderen Schiebedachs N036. An Pin 2 erhalt er ein Plussignal von Pin 2 des Schiebedachmotors N036. Wird der Schalter in Stellung A gedruckt, wird das Signal von Pin 3 von H061 an Pin 3 von N036 gelegt und steuert das Offnen des Schiebedachs. In Stellung B wird das Signal von Pin 6 von H061 an Pin 9 von N036 gelegt und steuert das Schlie?en des Schiebedachs.Der Schalter I120 steuert das Offnen/Schlie?en des mittleren Schiebedachs N155. An Pin 2 erhalt er ein Plussignal von Pin 2 des Schiebedachmotors N155. Wird der Schalter in Stellung A gedruckt, wird das Signal von Pin 3 von I120 an Pin 3 von N155 gelegt und steuert das Offnen des Schiebedachs. In Stellung B wird das Signal von Pin 6 von I120 an Pin 9 von N155 gelegt und steuert das Schlie?en des Schiebedachs.Der Schalter I121 steuert das Offnen/Schlie?en des hinteren Schiebedachs N156. An Pin 2 erhalt er ein Plussignal von Pin 2 des Schiebedachmotors N156. Wird der Schalter in Stellung A gedruckt, wird das Signal von Pin 3 von I121 an Pin 3 von N156 gelegt und steuert das Offnen des Schiebedachs. In Stellung B wird das Signal von Pin 6 von I121 an Pin 9 von N156 gelegt und steuert das Schlie?en des Schiebedachs.Das Plussignal wird von Pin 2 des vorderen Schiebedachs N036 an Pin 2 des gleichen Schalters gelegt.Wird der Schalter in Stellung A gedruckt, wird das Signal von Pin 3 von I122 an Pin 3 des Motors des mittleren Schiebedachs N155 und von Pin 1 von I122 an Pin 3 des Motors des vorderen Schiebedachs N156 gelegt und steuert das Offnen der beiden Schiebedacher. In Stellung B wird das Signal von Pin 6 von I122 an Pin 9 des Motors des mittleren Schiebedachs N155 und von Pin 4 von I122 an Pin 9 des Motors des vorderen Schiebedachs N156 gelegt und steuert das Schlie?en der beiden Schiebedacher.Der Schalter I122 steuert das Offnen/Schlie?en sowohl des mittleren (N155) als auch des hinteren Schiebedachs (N156).Uber die vordere Schaltergruppe auf der Fahrerseite H051 kann das Offnen/Schlie?en der hinteren Scheiben < R1 > und die Bedienungen des mittleren und hinteren Schiebedachs gesperrt werden.Das Signal wird von Pin 2 des Steckers B von H051 an Pin 11 des Steckers A des Turknotens M066 geliefert. Uber das CAN-Netz informiert der Turknoten M066 den Knoten Body Computer M001 uber den Befehl zum Ausschlie?en der hinteren Schiebedacher.