Bauteile - STANDLICHT / KENNZEICHENLEUCHTE - Fiat ULYSSE 2.2 16V JTD fino a 04/03
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
A001 | BATTERIE | - |
B001 | VERTEILER IM MOTORRAUM | |
C010 | MASSE VORNE LINKS | - |
C011 | MASSE VORNE RECHTS | - |
C015 | MASSE ARMATURENBRETT FAHRERSEITE | - |
C020 | MASSE ARMATURENBRETT BEIFAHRERSEITE | - |
C030 | MASSE HINTEN LINKS | - |
C031 | MASSE HINTEN RECHTS | - |
D006 | VORDERE/HINTERE VERBINDUNG | - |
D020 | VERBINDUNG ARMATURENBRETT / HINTEN | - |
D085 | VERBINDUNG HINTEN/HECKKLAPPE | - |
D212 | VERBINDUNG KENNZEICHENLEUCHTEN | - |
E050 | INSTRUMENTENTAFEL | |
F010 | SCHEINWERFER LINKS | |
F011 | SCHEINWERFER RECHTS | |
F030 | RUCKLEUCHTE LINKS | |
F031 | RUCKLEUCHTE RECHTS | |
F050 | KENNZEICHENLEUCHTE LINKS | |
F051 | KENNZEICHENLEUCHTE RECHTS | |
H001 | Zundschloss | |
K125 | REGEN- UND DAMMERUNGSSENSOR | |
M001 | BODY COMPUTER | |
M093 | ELEKTRONIK KNOTEN LENKRAD (NVO) | |
M140 | ELEKTRONIK KONTROLLLEUCHTEN UND KILOMETERZAHLER (NSO) | - |
Das Standlicht wird mit der ersten Raste des Randelrings auf dem linken Hebel des Lenksaulenschalters eingeschaltet (Knoten Lenkrad).Die Funktion zur Betatigung des Standlichts wird durch die Freigabesignale bei Schlussel auf M und Bedienung des Lenksaulenschalters aktiviert. So werden alle Standlichtlampen und auch die Kennzeichenleuchte und verschiedene Innenleuchten zur Beleuchtung des Fahrgastraums, der Instrumente und der Bedienelemente eingeschaltet (diese Stromkreise sind in den Schaltplanen zu den entsprechenden Komponenten, auf die sie sich beziehen, beschrieben und dargestellt).Die Information uber die Aktivierung und/oder Deaktivierung wird uber das CAN-Netz gesendet. Dadurch leuchtet auch die Kontrollleuchte "Standlicht" in der Instrumententafel auf. Die Instrumententafel aktiviert auch die Nachtbeleuchtung der Symbole.Das Standlicht kann uber die Taste AUTO am Lenksaulenschalter auch automatisch aktiviert werden: diese Funktion wird durch einen Infrarot-Dammerungssensor auf der Frontscheibe realisiert.Aktivierung und Deaktivierung werden durch ein akustisches Signal begleitet.769 Wenn die Vorrichtung eingeschaltet ist, werden auch bei aktiviertem Scheibenwischer die Lichter automatisch eingeschaltet. Die Funktion "Follow me home" erlaubt es, Abblendlicht und Standlicht nach Abstellen des Motors (Schlussel auf S) fur eine Zeit von 45 Sekunden eingeschaltet zu lassen.Das eingeschaltete Licht wird in der Instrumententafel durch das Aufleuchten der Kontrollleuchte fur Standlicht angezeigt. Die Einschaltung erfolgt durch Betatigung des Lichthupenhebels binnen 2 Minuten nach Abstellen des Motors.
Der Einschaltbefehl der Standleuchten/Kennzeichenleuchten wird vom Knoten Lernkrad M093 uber CAN (Pin 1 und 3 Stecker A) an den Knoten Body Computer M001 (an Pin 5 und 3 Stecker G) geliefert.Der Knoten Lenkradsteuerung M093 liegt uber Pin 4 Stecker A an C015 an Masse (Stecker A) und wird an Pin 5 des selben Steckers von Pin 11 Stecker B des Knotens Body Computer M001 mit Strom versorgt..Nach Erhalt des Befehles liefert der Knoten Body Computer M001 die Stromversorgung.- an Pin 1 des Ruckscheinwerfers rechts F031, von Pin 12 (Secker I);- an Pin 1 des Ruckscheinwerfers links F030, von Pin 13 (Secker I);- an Pin 1 der Kennzeichenleuchten F050 und F051, von Pin 18 (Stecker I).Ausserdem betatigt der Knoten Body Computer M001 uber CAN (Pin 25 und 27 Stecker E) die Pin 12 und 11 (entspechend) Stecker F des Verteilers im Motorraum B001. Dieser betatigt (mit Pin 11 und 12 Stecker G) die Pin 3 des vorderen Scheinwerfers rechts F011 und links F010 (entsprechend).Das Einschalten der entsprechenden Kontrolleuchte wird vom Knoten Kontrolleuchten Hodometer M140 verwaltet, der uber CAN E1050 (Pin 2 und 5) mit der Instrumententafel E050 (Pin 6 und 12) und dem Knoten Body Computer M001 (Pin 8 und 10 Stecker D) dialogiert.Der Knoten Body Computer M001 versorgt uber Pin 6 Stecker D den Knoten Kontrolleuchten Hodometer M140 an Pin 4 und die Instrumententafel E050 an Pin 13 mit Strom.Der Sonnen-/Dammerungssensor K125 liefert uber Pin 1, 2, 4 die Information uber das Aussenlicht an den Knoten Body Computer M001 an Pin 3, 24, 26 (entsprechend) des Steckers L.
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
A001 | BATTERIE | - |
B001 | VERTEILER IM MOTORRAUM | |
C010 | MASSE VORNE LINKS | - |
C011 | MASSE VORNE RECHTS | - |
C015 | MASSE ARMATURENBRETT FAHRERSEITE | - |
C020 | MASSE ARMATURENBRETT BEIFAHRERSEITE | - |
C030 | MASSE HINTEN LINKS | - |
C031 | MASSE HINTEN RECHTS | - |
D006 | VORDERE/HINTERE VERBINDUNG | - |
D020 | VERBINDUNG ARMATURENBRETT / HINTEN | - |
D085 | VERBINDUNG HINTEN/HECKKLAPPE | - |
D212 | VERBINDUNG KENNZEICHENLEUCHTEN | - |
E050 | INSTRUMENTENTAFEL | |
F010 | SCHEINWERFER LINKS | |
F011 | SCHEINWERFER RECHTS | |
F030 | RUCKLEUCHTE LINKS | |
F031 | RUCKLEUCHTE RECHTS | |
F050 | KENNZEICHENLEUCHTE LINKS | |
F051 | KENNZEICHENLEUCHTE RECHTS | |
H001 | Zundschloss | |
K125 | REGEN- UND DAMMERUNGSSENSOR | |
M001 | BODY COMPUTER | |
M093 | ELEKTRONIK KNOTEN LENKRAD (NVO) | |
M140 | ELEKTRONIK KONTROLLLEUCHTEN UND KILOMETERZAHLER (NSO) | - |