Schaltplan - ABBLENDLICHT - Fiat ULYSSE 2.2 16V JTD fino a 04/03
Bauteile - ABBLENDLICHT - Fiat ULYSSE 2.2 16V JTD fino a 04/03
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
B001 | Verteiler im Motorraum | 5505A |
C010 | Masse vorne links | - |
C011 | Masse vorne rechts | - |
C015 | Masseanschluss Armaturenbrett Fahrerseite | - |
C020 | Masse Armaturenbrett Beifahrerseite | - |
D020 | Verbindung Armaturenbrett/hinten | - |
E050 | Instrumententafel | 5560B |
F010 | Scheinwerfer links | 5540B |
F011 | Scheinwerfer rechts | 5540B |
K090 | Sonnen-/Dammerungssensor | 5010D |
M001 | Body Computer | 5505A |
M093 | Elektronik Knoten Lenkrad (NVO) | 5550A |
M140 | Elektronik Kontrollleuchten und Kilometerzahler (NSO) | - |
Einbaulage Bauteile - ABBLENDLICHT - Fiat ULYSSE 2.2 16V JTD fino a 04/03
Bauteile - ABBLENDLICHT - Fiat ULYSSE 2.2 16V JTD fino a 04/03
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
B001 | Verteiler im Motorraum | 5505A |
C010 | Masse vorne links | - |
C011 | Masse vorne rechts | - |
C015 | Masseanschluss Armaturenbrett Fahrerseite | - |
C020 | Masse Armaturenbrett Beifahrerseite | - |
D020 | Verbindung Armaturenbrett/hinten | - |
E050 | Instrumententafel | 5560B |
F010 | Scheinwerfer links | 5540B |
F011 | Scheinwerfer rechts | 5540B |
K090 | Sonnen-/Dammerungssensor | 5010D |
M001 | Body Computer | 5505A |
M093 | Elektronik Knoten Lenkrad (NVO) | 5550A |
M140 | Elektronik Kontrollleuchten und Kilometerzahler (NSO) | - |
Beschreibung - ABBLENDLICHT - Fiat ULYSSE 2.2 16V JTD fino a 04/03
Das Fahrzeug besitzt zwei Abblendlichtscheinwerfer.Das Abblendlicht wird durch Drehen des entsprechenden Randelrings am Lenksaulenschalter in die auf das Standlicht folgende Position eingeschaltet.Ein entsprechendes Relais - im Verteiler im Motorraum - steuert das Einschalten des Abblendlichts uber zwei durch Sicherungen geschutzte Leitungen.Das Relais zum Einschalten des Abblendlichts wird vom Body Computer gesteuert: die Erregung des Relais wird durch die Freigabesignale bei Schlussel auf M und durch das entsprechende Signal bei Bedienung des Lenksaulenschalters aktiviert.Die Information uber die Aktivierung und/oder Deaktivierung wird uber das CAN-Netz gesendet. Dadurch leuchtet auch die Kontrollleuchte "Abblendlicht" in der Instrumententafel auf.Der Body Computer verwaltet auch die Funktion "Abblendlicht beibehalten": Wenn das Fernlicht eingeschaltet wird, lasst der Body Computer das Abblendlicht eingeschaltet.Sind Abblendlicht und Fernlicht schon eingeschaltet und werden die Nebelscheinwerfer eingeschaltet, wird das Abblendlicht ausgeschaltet.Analog gilt, dass wenn Abblendlicht und Nebelscheinwerfer schon eingeschaltet sind und das Fernlicht eingeschaltet wird, das Abblendlicht ausgeschaltet wird.In anderen Worten: bei eingeschaltetem Fernlicht und Nebelscheinwerfern ist das Abblendlicht immer aus.Das Abblendlicht kann uber die Taste AUTO am Lenksaulenschalter auch automatisch aktiviert werden: diese Funktion wird durch einen Infrarot-Dammerungssensor auf der Frontscheibe realisiert.Aktivierung und Deaktivierung werden durch ein akustisches Signal begleitet.
Funktionsbeschreibung - ABBLENDLICHT - Fiat ULYSSE 2.2 16V JTD fino a 04/03
Der Befehl zum Einschalten des Abblendlichts kommt vom Knoten Lenkrad M093 zum Knoten Body Computer M001. Das Signal wird uber das CAN-Netz ubertragen, das die beiden Elektroniken verbindet.Der Knoten Lenkrad M093 erhalt die Stromversorgung (Pin 5 des Steckers A) uber die Leitung mit der Sicherung F11, die sich im Knoten Body Computer M001 befindet; Dieser wird uber CAN (Pin 6 des Steckers A) von der mit der Sicherung F16 im Knoten Body Computer M001 geschutzten Leitung mit Strom versorgt.Der Knoten Body Computer M001 informiert seinerseits uber das CAN-Netz den Verteiler im Motorraum B001 uber die erfolgte Anfrage zum Einschalten des Abblendlichts.Das interne Relais im Verteiler im Motorraum B001 wird also erregt und liefert die Stromversorgung zu den Scheinwerfern F010 und F011 uber die von den Sicherungen F09 und F10 - beide im Verteiler B001 - geschutzten Leitungen.Das Aufleuchten der entsprechenden Kontrollleuchte wird vom Knoten Kontrollleuchten Kilometerzahler M140 gesteuert, der uber CAN mit der Instrumententafel E050 und dem Knoten Body Computer M001 kommuniziert.Die Instrumententafel E050 und der Knoten Kontrollleuchten Kilometerzahler erhalten die Stromversorgung uber CAN (Pin 13 von E50 und Pin 4 von M140) von der mit der Sicherung F24 im Body Computer M001 geschutzten Leitung.Die Instrumententafel E050 und der Knoten Kontrollleuchten Kilometerzahler erhalten die Stromversorgung uber CAN (Pin 13 von E50 und Pin 4 von M140) von der mit der Sicherung F24 im Body Computer M001 geschutzten Leitung.