Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
A001 | BATTERIE | - |
B001 | VERTEILER IM MOTORRAUM | |
B005 | GRO?SICHERUNGSKASTEN | - |
B098 | ZUSATZVERTEILER | - |
C010 | MASSE VORNE LINKS | - |
C011 | MASSE VORNE RECHTS | - |
C015 | MASSE ARMATURENBRETT FAHRERSEITE | - |
C020 | MASSE ARMATURENBRETT BEIFAHRERSEITE | - |
D006 | VORDERE/HINTERE VERBINDUNG | - |
D020 | VERBINDUNG ARMATURENBRETT / HINTEN | - |
E050 | INSTRUMENTENTAFEL | |
F010 | SCHEINWERFER LINKS | |
F011 | SCHEINWERFER RECHTS | |
H001 | Zundschloss | |
J148 | Relais Gasentladungsscheinwerfer | - |
M001 | BODY COMPUTER | |
M093 | ELEKTRONIK KNOTEN LENKRAD (NVO) | |
M140 | ELEKTRONIK KONTROLLLEUCHTEN UND KILOMETERZAHLER (NSO) | - |
Das Fahrzeug besitzt zwei Fernlichtscheinwerfer.Die Fernlichter werden vom Lenkstockschalter aktiviert:- bei eingeschaltetem Abblendlicht durch Drucken des Hebels zum Armaturenbrett (Dauerfernlicht),- zur "Lichthupe" durch Ziehen des Hebels zum Lenkrad hin.Das Einschalten der Fernlichter wird vom Body Computer verwaltet, der diese ativiert, nachdem er die Freigabessignale vom Schlussel auf M und dem Befehl am Lenkstockschalter erhalten hat.Die Information uber die Aktivierung und/oder Deaktivierung wird uber das CAN-Netz gesendet. Auf diese Weise wird die Kontrolleuchte der "Fernlichter" in der Instrumententafel angeschaltet.Der Body Computer verwaltet auch die Funktion der Beibehaltung der Abblendlichter. Die Abblendlichter bleiben eingeschaltet, wenn die Fernlichter eingeschaltet werden.
Der Einschaltbefehl der Fernlichter wird vom Knoten Lernkrad M093 uber CAN (Pin 1 und 3 Stecker A) an den Knoten Body Computer M001 (an Pin 5 und 3 Stecker G) geliefert.Der Knoten Lenkradsteuerung M093 liegt an C015 (Stecker A) uber Pin 4 Stecker A an Masse und versorgt die beiden Leitungen: eine von Pin 11 Stecker B des Knotens Body Computer M001 an Pin 5 Stecker A; die andere von Pin 1 Stecker G in M001 an Pin 4 Stecker D, von Sicherung F04 geschutzt.Der Knoten Body Computer M001 informiert seinerseits den Verteiler im Motorraum B001 (Pin 12 und 11 Stecker F) uber CAN (Pin 25 und 27 Stecker E) uber die Anfrage zum Einschalten der Fernlichter.Der Verteiler im Motorraum B001 steuert das Relais J148 an Pin 1A uber Pin 28 des Steckers G. Dieses (J148) erhalt die Stromversorgung an Pin 3A von Pin G38 Stecker B des zusatzlichen Sicherungskastens B098 uber eine Leitung mit Sicherung F38 und von Pin 5A werden die Pin 2 der vorderen Scheinwerfer links F010 und rechts F011 versorgt.Das Einschalten der entsprechenden Kontrolleuchte wird vom Knoten Kontrolleuchten Hodometer M140 verwaltet, der uber CAN (Pin 2 und 5) mit der Instrumententafel E050 (Pin 6 und 12) und dem Knoten Body Computer M001 (Pin 8 und 10 Stecker D) dialogiert.Der Knoten Body Computer M001 versorgt uber Pin 6 Stecker D den Knoten Kontrolleuchten Hodometer M140 an Pin 4 und die Instrumententafel E050 an Pin 13 mit Strom. Diese Leitung wird von der Sicherung F14 geschutzt.
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
A001 | BATTERIE | - |
B001 | VERTEILER IM MOTORRAUM | |
B005 | GRO?SICHERUNGSKASTEN | - |
B098 | ZUSATZVERTEILER | - |
C010 | MASSE VORNE LINKS | - |
C011 | MASSE VORNE RECHTS | - |
C015 | MASSE ARMATURENBRETT FAHRERSEITE | - |
C020 | MASSE ARMATURENBRETT BEIFAHRERSEITE | - |
D006 | VORDERE/HINTERE VERBINDUNG | - |
D020 | VERBINDUNG ARMATURENBRETT / HINTEN | - |
E050 | INSTRUMENTENTAFEL | |
F010 | SCHEINWERFER LINKS | |
F011 | SCHEINWERFER RECHTS | |
H001 | Zundschloss | |
J148 | Relais Gasentladungsscheinwerfer | - |
M001 | BODY COMPUTER | |
M093 | ELEKTRONIK KNOTEN LENKRAD (NVO) | |
M140 | ELEKTRONIK KONTROLLLEUCHTEN UND KILOMETERZAHLER (NSO) | - |