Schaltplan - DECKENLEUCHTEN - Fiat ULYSSE 2.2 16V JTD fino a 04/03
Bauteile - DECKENLEUCHTEN - Fiat ULYSSE 2.2 16V JTD fino a 04/03
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
C020 | Masse Armaturenbrett Beifahrerseite | - |
C030 | Masse hinten links | - |
C031 | Masse hinten rechts | - |
D030 | Verbindung Vordertur links | - |
D031 | Verbindung Vordertur rechts | - |
D042 | Verbindung Deckenleuchten | - |
G010 | Vordere Innenleuchte | 7040E |
G011 | Vordere Innenleuchte Passagierbereich | 7040E |
G012 | Hintere Innenleuchte Passagierbereich | 7040E |
I018 | Schalter an der Hintertur links | - |
I019 | Schalter an der Hintertur rechts | - |
I129 | Schalter zum Sperren der Betriebsart Einsteigelicht | - |
M001 | Body Computer | 5505A |
N050 | Verriegelungsantrieb Vordertur links | 7005N |
N051 | Verriegelungsantrieb Vordertur rechts | 7005N |
Einbaulage Bauteile - DECKENLEUCHTEN - Fiat ULYSSE 2.2 16V JTD fino a 04/03
Bauteile - DECKENLEUCHTEN - Fiat ULYSSE 2.2 16V JTD fino a 04/03
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
C020 | Masse Armaturenbrett Beifahrerseite | - |
C030 | Masse hinten links | - |
C031 | Masse hinten rechts | - |
D030 | Verbindung Vordertur links | - |
D031 | Verbindung Vordertur rechts | - |
D042 | Verbindung Deckenleuchten | - |
G010 | Vordere Innenleuchte | 7040E |
G011 | Vordere Innenleuchte Passagierbereich | 7040E |
G012 | Hintere Innenleuchte Passagierbereich | 7040E |
I018 | Schalter an der Hintertur links | - |
I019 | Schalter an der Hintertur rechts | - |
I129 | Schalter zum Sperren der Betriebsart Einsteigelicht | - |
M001 | Body Computer | 5505A |
N050 | Verriegelungsantrieb Vordertur links | 7005N |
N051 | Verriegelungsantrieb Vordertur rechts | 7005N |
Beschreibung - DECKENLEUCHTEN - Fiat ULYSSE 2.2 16V JTD fino a 04/03
Die Deckenleuchte vorne und die in der Mitte enthalten drei Gluhlampen mit drei Bedienschaltern:
Funktionsbeschreibung - DECKENLEUCHTEN - Fiat ULYSSE 2.2 16V JTD fino a 04/03
Die Deckenleuchten des Innenraums schalten sich in der Betriebsart "Einsteigeleuchten" nach dem Offnen der jeweiligen Tur ein.Das Offnen der Vorderturen wird durch die in die Schlosser N050 und N051 integrierten Schalter signalisiert.Beim Offnen der Tur liefert der Schalter (Offner) ein Massesignal an Pin 4 (linke Vordertur) und an Pin 5 (rechte Vordertur) des Steckers L des Knoten Body Computer M001.Wenn der Body Computer M001 das Signal erhalt, sendet er von Pin 32 des Steckers L den Befehl an die vordere Deckenleuchte G010, wobei die Stromversorgung uber die mit der Sicherung F12 in M001 geschutzte Leitung erfolgt.Wenn der Body Computer M001 das Signal erhalt, sendet er von Pin 32 des Steckers L den Befehl an die vordere Deckenleuchte G010, wobei die Stromversorgung uber die mit der Sicherung F12 in M001 geschutzte Leitung erfolgt.Das Offnen der seitlichen Schiebeturen wird durch die speziellen Schalter I018 (linke Schiebetur) und I019 (rechte Schiebetur) gemeldet.Beim Offnen der Schiebetur erhalt der Knoten Body Computer M001 an Pin 34 (linke Schiebetur) und 33 (rechte Schiebetur) des Steckers L ein Massesignal. Von Pin 6 des Steckers sendet der Body Computer M001 den Befehl an die Deckenleuchten G011 und G012 und versorgt die Gluhlampen in den Leuchten mit Strom.Uber den Schalter I129 kann die Betriebsart Einsteigeleuchte der vorderen Deckenleuchte gesperrt/freigegeben werden. Der Befehl zur Freigabe besteht aus einem Massesignal von Pin 32 von I129 an Pin 25 des Steckers L von M001, wobei beim Sperren das Massesignal von Pin A2 von I129 an Pin 15 des Steckers I von M001 angelegt wird.Fur den manuellen Betrieb liefert der Body Computer M001 von Pin 12 des Steckers H eine Stromversorgung - uber die durch die Sicherung F07 in M001 geschutzte Leitung - direkt zur vorderen Deckenleuchte G010 und an die hinteren Deckenleuchten G011 und G012..Uber die internen Schalter der Deckenleuchten G010, G011 und G012 konnen die jeweiligen Gluhlampen in den Leuchten manuell eingeschaltet werden.