Schaltplan - AUSSTEIGELICHT - Fiat ULYSSE 2.2 16V JTD fino a 04/03
Bauteile - AUSSTEIGELICHT - Fiat ULYSSE 2.2 16V JTD fino a 04/03
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
C020 | Masse Armaturenbrett Beifahrerseite | - |
D030 | Verbindung Vordertur links | - |
D031 | Verbindung Vordertur rechts | - |
G051 | Turleuchte vorne links (Aussteigelicht) | 7040E |
G052 | Turleuchte vorne rechts (Aussteigelicht) | 7040E |
M001 | Body Computer | 5505A |
N050 | Verriegelungsantrieb Vordertur links | 7005N |
N051 | Verriegelungsantrieb Vordertur rechts | 7005N |
Einbaulage Bauteile - AUSSTEIGELICHT - Fiat ULYSSE 2.2 16V JTD fino a 04/03
Bauteile - AUSSTEIGELICHT - Fiat ULYSSE 2.2 16V JTD fino a 04/03
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
C020 | Masse Armaturenbrett Beifahrerseite | - |
D030 | Verbindung Vordertur links | - |
D031 | Verbindung Vordertur rechts | - |
G051 | Turleuchte vorne links (Aussteigelicht) | 7040E |
G052 | Turleuchte vorne rechts (Aussteigelicht) | 7040E |
M001 | Body Computer | 5505A |
N050 | Verriegelungsantrieb Vordertur links | 7005N |
N051 | Verriegelungsantrieb Vordertur rechts | 7005N |
Beschreibung - AUSSTEIGELICHT - Fiat ULYSSE 2.2 16V JTD fino a 04/03
An den beiden Vorderturen befinden sich zwei Leuchten zur Beleuchtung des Bodens ("Aussteigeleuchten").Die "Aussteigeleuchten" leuchten beim Offnen der jeweiligen Tur unabhangig von der Zundschlusselstellung auf.Das Einschalten der Innenleuchten erfolgt zeitgesteuert auf Grundlage einer Logik, die vom Body Computer verwaltet wird: beim Offnen einer Vordertur schaltet sich die mittlere Leuchte ohne die Spots < R1 > und die Aussteigelichter ein. Die Funktion ist zeitgesteuert: einige Sekunden nach Schlie?en der Turen gehen die Lichter allmahlich aus.
Funktionsbeschreibung - AUSSTEIGELICHT - Fiat ULYSSE 2.2 16V JTD fino a 04/03
Das Offnen der Vorderturen wird durch die in die Schlosser N050 und N051 integrierten Schalter signalisiert. Beim Offnen der Tur liefert der Schalter (Offner) ein Massesignal an Pin 4 (linke Vordertur) und an Pin 5 (rechte Vordertur) des Steckers L des Knoten Body Computer M001.Wenn der Body Computer M001 das Signal erhalt, sendet er von Pin 7 des Steckers I den Befehl an die Leuchten an den Vorderturen G051 und G052, wobei die Stromversorgung uber die mit der Sicherung F07 in M001 geschutzte Leitung erfolgt.