Bauteile - LEUCHTWEITENREGELUNG - Fiat ULYSSE 2.2 16V JTD fino a 04/03
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
A001 | BATTERIE | - |
B001 | VERTEILER IM MOTORRAUM | |
C010 | MASSE VORNE LINKS | - |
C011 | MASSE VORNE RECHTS | - |
C015 | MASSE ARMATURENBRETT FAHRERSEITE | - |
C020 | MASSE ARMATURENBRETT BEIFAHRERSEITE | - |
D006 | VORDERE/HINTERE VERBINDUNG | - |
D020 | VERBINDUNG ARMATURENBRETT / HINTEN | - |
E050 | INSTRUMENTENTAFEL | |
F010 | SCHEINWERFER LINKS | |
F011 | SCHEINWERFER RECHTS | |
H001 | Zundschloss | - |
H015 | SCHALTER FUR LEUCHTWEITENREGELUNG | - |
M001 | BODY COMPUTER | |
M093 | ELEKTRONIK KNOTEN LENKRAD (NVO) | |
M140 | ELEKTRONIK KONTROLLLEUCHTEN UND KILOMETERZAHLER (NSO) | - |
Die Ausrichtung der Lichtkegel der Scheinwerfer in Abhangigkeit von der Last erfolgt uber die entsprechende Regeleinrichtung, die direkt in den Scheinwerfern untergebracht ist. Die Lichtkegel werden bei stark beladenem Fahrzeug gesenkt bzw. angehoben, wenn das Fahrzeug entlastet wird.Ein Drehschalter auf der linken Seite des Armaturenbretts ermoglicht das Ausrichten der Scheinwerfer mit vier Stellungen.- Stellung 0 - eine oder zwei Personen auf den Vordersitzen, voller Kraftstofftank, Bordausstattung (Fahrzeug " betriebsbereit" ),- Position 1 - funf Personen,- Position 2 - funf Personen mit beladenem Kofferraum,- Position 3 - acht Personen mit beladenem Kofferraum oder Fahrer und max. Zuladung im Kofferraum.768 Die Ausrichtung der Lichtkegel bei jeder Veranderung der transportierten Ladung einstellen. Die Leuchtweitenregelung arbeitet nur bei eingeschaltetem Abblendlicht.Der Body Computer versorgt die in die Scheinwerfer integrierten Einstellmotoren mit Strom.768 Bei der Version mit Gasentladungsscheinwerfern erfolgt die Leuchtweitenregelung automatisch: der Drehschalter auf der linken Seite des Armaturenbretts ist nicht vorhanden.
Die Leuchtweitenregelung hat einen Wahlschalter H015. Pin 2 von H015 (wie auch die Pins 9 der Scheinwerfer F010 und F011) erhalten die Stromversorgung von Pin 2 des Steckers B des Knotens Body Computer M001. Die Stromversorgung erfolgt nur bei eingeschaltetem Abblendlicht.Pin 3 von H015 ist zusammen mit Pin 8 des Steckers B des Body Computers M001 mit Masse verbunden. Von Pin 1 wird ein Signal mit veranderlicher Spannung zu Pin 7 des linken (F010) und rechten (F011) Scheinwerfers gesendet.Die Stellmotoren in den Scheinwerfern haben Wandler, die den Motorlauf anhand der veranderlichen Spannung bestimmen. An Pin 1 der Scheinwerfer F010 und F011 sind die Abblendlichtscheinwerfer angeschlossen, die uber Pin 25 bzw. 26 des Steckers G des Verteilers im Motorraum B001 mit Strom versorgt werden.
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
A001 | BATTERIE | - |
B001 | VERTEILER IM MOTORRAUM | |
C010 | MASSE VORNE LINKS | - |
C011 | MASSE VORNE RECHTS | - |
C015 | MASSE ARMATURENBRETT FAHRERSEITE | - |
C020 | MASSE ARMATURENBRETT BEIFAHRERSEITE | - |
D006 | VORDERE/HINTERE VERBINDUNG | - |
D020 | VERBINDUNG ARMATURENBRETT / HINTEN | - |
E050 | INSTRUMENTENTAFEL | |
F010 | SCHEINWERFER LINKS | |
F011 | SCHEINWERFER RECHTS | |
H001 | Zundschloss | - |
H015 | SCHALTER FUR LEUCHTWEITENREGELUNG | - |
M001 | BODY COMPUTER | |
M093 | ELEKTRONIK KNOTEN LENKRAD (NVO) | |
M140 | ELEKTRONIK KONTROLLLEUCHTEN UND KILOMETERZAHLER (NSO) | - |