Schaltplan - FERNLICHT - Fiat ULYSSE 2.2 16V JTD da 04/03
Bauteile - FERNLICHT - Fiat ULYSSE 2.2 16V JTD da 04/03
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
B001 | Verteiler im Motorraum | 5505A |
C010 | Masse vorne links | - |
C011 | Masse vorne rechts | - |
C015 | Masseanschluss Armaturenbrett Fahrerseite | - |
D020 | Verbindung Armaturenbrett/hinten | - |
E050 | Instrumententafel | 5560B |
F010 | Scheinwerfer links | 5540B |
F011 | Scheinwerfer rechts | 5540B |
M001 | Body Computer | 5505A |
M093 | Elektronik Knoten Lenkrad (NVO) | 5550A |
M140 | Elektronik Kontrollleuchten und Kilometerzahler (NSO) | - |
Einbaulage Bauteile - FERNLICHT - Fiat ULYSSE 2.2 16V JTD da 04/03
Bauteile - FERNLICHT - Fiat ULYSSE 2.2 16V JTD da 04/03
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
B001 | Verteiler im Motorraum | 5505A |
C010 | Masse vorne links | - |
C011 | Masse vorne rechts | - |
C015 | Masseanschluss Armaturenbrett Fahrerseite | - |
D020 | Verbindung Armaturenbrett/hinten | - |
E050 | Instrumententafel | 5560B |
F010 | Scheinwerfer links | 5540B |
F011 | Scheinwerfer rechts | 5540B |
M001 | Body Computer | 5505A |
M093 | Elektronik Knoten Lenkrad (NVO) | 5550A |
M140 | Elektronik Kontrollleuchten und Kilometerzahler (NSO) | - |
Beschreibung - FERNLICHT - Fiat ULYSSE 2.2 16V JTD da 04/03
Das Fahrzeug besitzt zwei Fernlichtscheinwerfer.Das Fernlicht wird mit dem Lenksaulenschalter eingeschaltet:
Funktionsbeschreibung - FERNLICHT - Fiat ULYSSE 2.2 16V JTD da 04/03
Der Befehl zum Einschalten des Fernlichts kommt vom Knoten Lenkrad M093 zum Knoten Body Computer M001. Das Signal wird uber das CAN-Netz ubertragen, das die beiden Elektroniken verbindet.Der Knoten Lenkrad M093 erhalt die Stromversorgung (Pin 5 des Steckers A) uber die Leitung mit der Sicherung F11, die sich im Knoten Body Computer M001 befindet; Dieser wird uber CAN (Pin 6 des Steckers A) von der mit der Sicherung F16 im Knoten Body Computer M001 geschutzten Leitung mit Strom versorgt.Der Knoten Body Computer M001 informiert seinerseits uber das CAN-Netz den Verteiler im Motorraum B001 uber die erfolgte Anfrage zum Einschalten des Fernlichts.Das interne Relais im Verteiler im Motorraum B001 wird also erregt und liefert die Stromversorgung zu den Scheinwerfern F010 und F011 uber die von den Sicherungen F11 und F12 - beide im Verteiler - geschutzten Leitungen.Das Aufleuchten der entsprechenden Kontrollleuchte wird vom Knoten Kontrollleuchten Kilometerzahler M140 gesteuert, der uber CAN mit der Instrumententafel E050 und dem Knoten Body Computer M001 kommuniziert.Die Instrumententafel E050 und der Knoten Kontrollleuchten Kilometerzahler erhalten die Stromversorgung uber CAN (Pin 13 von E50 und Pin 4 von M140) von der mit der Sicherung F24 im Body Computer M001 geschutzten Leitung.