Das Fahrzeug besitzt zwei Fernlichtscheinwerfer.Das Fernlicht wird mit dem Lenksaulenschalter eingeschaltet:- bei eingeschaltetem Abblendlicht durch Drucken des Hebels zum Armaturenbrett hin (Dauerfernlicht),- zur "Lichthupe" durch Ziehen des Hebels zum Lenkrad hin.Das Einschalten des Fernlichts wird vom Body Computer verwaltet, der nach Erhalten der Freigabesignale vom Zundschlussel in Stellung M und von der Bedienung am Lenksaulenschalter die Fernlichtscheinwerfer einschaltet.Die Information uber die Aktivierung und/oder Deaktivierung wird uber das CAN-Netz gesendet: dadurch leuchtet auch die Kontrollleuchte "Fernlicht" in der Instrumententafel auf.Der Body Computer verwaltet auch die Funktion "Abblendlicht beibehalten": das Abblendlicht bleibt beim Einschalten des Fernlichts eingeschaltet.
Den Befehl zum Einschalten des Fernlichts liefert der Knoten Lenkrad M093 uber die CAN-Leitung (Pin 1 und 3 des Steckers A) an den Knoten Body Computer M001 (an Pin 5 bzw. 3 des Steckers G).Der Knoten Lenkrad M093 ist uber Pin 4 des Steckers A mit der Masse C015 (Stecker A) verbunden und wird uber zwei Leitungen mit Spannung versorgt: eine von Pin 11 des Steckers B des Knotens Body Computer M001 an Pin 5 des Steckers A und die andere von Pin 1 des Steckers G von M001 an Pin 4 des Steckers D, abgesichert durch F04.Der Knoten Body Computer M001 informiert seinerseits uber die CAN-Leitung (Pin 25 und 27 des Steckers E) den Verteiler im Motorraum B001 (Pin 12 bzw. 11 des Steckers F) uber die erfolgte Anfrage zum Einschalten des Fernlichts.Der Verteiler im Motorraum B001 versorgt dann uber die Pins 28 bzw. 27 des Steckers G den jeweiligen Pin 2 des linken Scheinwerfers F010 und des rechten Scheinwerfers F011.Das Aufleuchten der betreffenden Kontrollleuchte wird vom Knoten Kilometerzahler-Kontrollleuchten M140 verwaltet, der uber das CAN-Netz (Pin 2 und 5) mit der Instrumententafel E050 (Pin 6 und 12) und dem Knoten Body Computer M001 (Pin 8 und 10 des Steckers D) kommuniziert.Der Knoten Body Computer M001 versorgt uber Pin 6 des Steckers D den Knoten Kilometerzahler-Kontrollleuchten M140 an Pin 4 und die Instrumententafel E050 an Pin 13. Diese Leitung wird durch die Sicherung F14 geschutzt.
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
A001 | BATTERIE | - |
B001 | VERTEILER IM MOTORRAUM | |
C010 | MASSE VORNE LINKS | - |
C011 | MASSE VORNE RECHTS | - |
C015 | MASSE ARMATURENBRETT FAHRERSEITE | - |
C020 | MASSE ARMATURENBRETT BEIFAHRERSEITE | - |
D006 | VORDERE/HINTERE VERBINDUNG | - |
D020 | VERBINDUNG ARMATURENBRETT / HINTEN | - |
E050 | INSTRUMENTENTAFEL | |
F010 | SCHEINWERFER LINKS | |
F011 | SCHEINWERFER RECHTS | |
H001 | Zundschloss | |
M001 | BODY COMPUTER | |
M093 | ELEKTRONIK KNOTEN LENKRAD (NVO) | |
M140 | ELEKTRONIK KONTROLLLEUCHTEN UND KILOMETERZAHLER (NSO) | - |