Bauteile - DECKENLEUCHTEN - Fiat ULYSSE 2.2 16V JTD da 04/03
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
B001 | VERTEILER IM MOTORRAUM | |
C020 | MASSE ARMATURENBRETT BEIFAHRERSEITE | - |
C030 | MASSE HINTEN LINKS | - |
C031 | MASSE HINTEN RECHTS | - |
D030 | VERBINDUNG FAHRERTUR | - |
D031 | VERBINDUNG BEIFAHRERTUR | - |
D042 | VERBINDUNG DECKENLEUCHTEN | - |
G010 | VORDERE INNENLEUCHTE | |
G011 | VORDERE INNENLEUCHTE PASSAGIERBEREICH | |
G012 | HINTERE INNENLEUCHTE PASSAGIERBEREICH | |
H001 | Zundschloss | |
I018 | SCHALTER AN DER HINTERTUR LINKS | - |
I019 | SCHALTER AN DER HINTERTUR RECHTS | - |
M001 | BODY COMPUTER | |
M80 | STEUERUNG TURVERRIEGELUNG | - |
N050 | VERRIEGELUNGSANTRIEB TURSCHLOSS FAHRERSEITE | Arbeit. 7005N TURVERRIEGELUNG/ZENTRALVERRIEGELUNG DER VORDERTUREN |
N051 | VERRIEGELUNGSANTRIEB TURSCHLOSS BEIFAHRERSEITE | Arbeit. 7005N TURVERRIEGELUNG/ZENTRALVERRIEGELUNG DER VORDERTUREN |
Die Deckenleuchte vorne und die in der Mitte enthalten drei Gluhlampen mit drei Bedienschaltern:- mit dem au?eren Schalter kann die jeweilige Spotleuchte eingeschaltet werden.- mit dem mittleren Schalter kann die mittlere Leuchte ein- und ausgeschaltet werden, wobei dies zeitgesteuert erfolgt (Betriebsart "Einsteigeleuchten") wie nachfolgend beschrieben.In der hinteren Deckenleuchte befindet sich nur eine Gluhlampe, die mit dem entsprechenden Schalter ebenfalls zeitgesteuert ein- und ausgeschaltet werden kann, wie nachfolgend beschrieben.Die Beleuchtung der Deckenleuchten wird progressiv mit einer Funktionslogik, die vom Body Computer verwaltet wird, ein- und ausgeschaltet:- wenn die Turen mit der FB oder durch Drehen des Schlussels im Schloss entriegelt werden, leuchten alle mittleren LIchter und die Spot. Die Funktion ist zeitgesteuert: werden die Turen nicht geoffnet, erloschen die Lichter progressiv nach einigen Sekunden;- Wird die Turverriegelungstaste der FB langer gedruckt (Funktion "Auffinden"), werden einige Sekunden lang alle Innenleuchten und die Fahrtrichtungsanzeiger eingeschaltet.- Wird der Schlussel in Position S gedreht, wird die vordere Deckenleuchte eingeschaltet. Die Funktion ist zeitgesteuert: nach einigen Sekunden gehen die Lichter allmahlich aus.- Wird eine Vordertur geoffnet, leuchtet das mittlere Licht der Deckenleuchte und die Aussteigleuchten an den Turen, aber nicht die Spot. Die Funktion ist zeitgesteuert: einige Sekunden nach Schlie?en der Turen gehen die Lichter allmahlich aus.- beim Anlassen des Motors gehen die Lichter nach einigen Sekunden allmahlich aus.- wird eine Fondtur geoffnet, schaltet sich die mittlere Leuchte ohne die Spots ein: Die Funktion ist zeitgesteuert: einige Sekunden nach Schlie?en der Turen gehen die Lichter allmahlich aus.- Wird die Hecktur geoffnet, leuchtet das Licht der Deckenleuchten im Kofferraum (eine oder zwei je nach Ausstattung). Wird die Hecktur geschlossen erloschen die Lichter progressiv.
Die Deckenleuchten des Innenraums schalten sich in der Betriebsart "Einsteigeleuchten" nach dem Offnen der jeweiligen Tur ein.Das Offnen der Vorderturen wird durch die in die Schlosser N050 und N051 integrierten Schalter signalisiert.Beim Offnen der Tur liefert der Schalter (Offner) von Pin 1 (Pin 6 bei Versionen mit Kindersicherung) ein Massesignal an Pin 4 (linke Vordertur) und an Pin 5 (rechte Vordertur) des Steckers L des Knoten Body Computer M001.Nach Erhalt des Signals sendet der Knoten Body Computer M001 (Pin 25 Stecker L) den Befehl an die Deckenleuchte vorne G010 (Pin 4 Stecker A).Das Offnen der Fondturen wird von speziellen Schaltern signalisiert: I018 fur die Fondtur links und I019 fur die Fondtur rechts.Je nach geoffneter Fondtur wird ein Massesignal (von Pin 1 in I018 oder I019) an den Knoten Body Computer M001 (Pin 34 oder Pin 33 Stecker L entsprechend) gesendet.Nach Erhalt des Signals sendet der Knoten Body Computer M001 (Pin 29 Stecker I den Befehl an die Deckenleuchte vorne G011(Pin 4).Fur die manuelle Funktion liefert der Knoten Body Computer M001 (Pin 20 Stecker I) eine direkte Stromversorgung an die vordere Deckenleuchte G010 (Pin 2 Stecker A) und die hinteren Deckenleuchten G011 und G012 (Pin 2).Mit den Schaltern an den Deckenleuchten G010, G011 und G012 konnen die verschiedenen Lampen manuell eingeschaltet werden.
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
B001 | VERTEILER IM MOTORRAUM | |
C020 | MASSE ARMATURENBRETT BEIFAHRERSEITE | - |
C030 | MASSE HINTEN LINKS | - |
C031 | MASSE HINTEN RECHTS | - |
D030 | VERBINDUNG FAHRERTUR | - |
D031 | VERBINDUNG BEIFAHRERTUR | - |
D042 | VERBINDUNG DECKENLEUCHTEN | - |
G010 | VORDERE INNENLEUCHTE | |
G011 | VORDERE INNENLEUCHTE PASSAGIERBEREICH | |
G012 | HINTERE INNENLEUCHTE PASSAGIERBEREICH | |
H001 | Zundschloss | |
I018 | SCHALTER AN DER HINTERTUR LINKS | - |
I019 | SCHALTER AN DER HINTERTUR RECHTS | - |
M001 | BODY COMPUTER | |
M80 | STEUERUNG TURVERRIEGELUNG | - |
N050 | VERRIEGELUNGSANTRIEB TURSCHLOSS FAHRERSEITE | Arbeit. 7005N TURVERRIEGELUNG/ZENTRALVERRIEGELUNG DER VORDERTUREN |
N051 | VERRIEGELUNGSANTRIEB TURSCHLOSS BEIFAHRERSEITE | Arbeit. 7005N TURVERRIEGELUNG/ZENTRALVERRIEGELUNG DER VORDERTUREN |