Bauteile - ENTEISUNG DER HECKSCHEIBE UND DER AUSSENSPIEGEL - Fiat ULYSSE 2.2 16V JTD da 04/03
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
B001 | VERTEILER IM MOTORRAUM | |
C020 | MASSE ARMATURENBRETT BEIFAHRERSEITE | - |
C031 | MASSE HINTEN RECHTS | - |
D030 | VERBINDUNG FAHRERTUR | - |
D031 | VERBINDUNG BEIFAHRERTUR | - |
D085 | VERBINDUNG HINTEN/HECKKLAPPE | - |
E050 | INSTRUMENTENTAFEL | |
M001 | BODY COMPUTER | |
M066 | TURBEDIENELEKTRONIK FAHRERSEITE (NPG) | |
M067 | TURBEDIENELEKTRONIK BEIFAHRERSEITE (NPP) | - |
M070 | KLIMAELEKTRONIK | - |
P055 | HEIZBARE HECKSCHEIEB | |
P060 | LINKER AUSSENSPIEGEL | Arbeit. 7005R ELEKTRISCH VERSTELLBARE AUSSENSPIEGEL AN DEN VORDERTUREN |
P061 | RECHTER AUSSENSPIEGEL | Arbeit. 7005R ELEKTRISCH VERSTELLBARE AUSSENSPIEGEL AN DEN VORDERTUREN |
Bei schlechter Sicht kann die Enteisung der Heckscheibe und der Au?enspiegel aktiviert werden.Die Heizwiderstande dieser Komponenten nehmen eine erhebliche Leistung auf und werden deshalb fur eine bestimmte Betriebszeit aktiviert und ggf. abgeschaltet: das Enteisen erfolgt zeitgesteuert gem. folgender Logik, die vom Body Computer verwaltet wird:- Schlussel auf M,- Einschaltsignal von der dafur vorgesehenen Taste im Bedienfeld der Klimaanlage.Unter diesen Umstanden bleiben die Widerstande maximal 20 Minuten lang eingeschaltet, dann wird die Stromversorgung unterbrochen.Die Stromversorgung wird auch unter folgenden Bedingungen unterbrochen:- Schlussel auf S,- Ausschaltsignal von der Taste,- Batteriespannung unter 8,5 V,- nach den ersten 10 Minuten Betrieb, wenn die Motordrehzahl unter 1000 UpM liegt.767 Die Steuerlogik der Klimaanlagenelektronik betrifft auch folgende Zustande:- Befehl "MAX-DEF" der Klimaanlage: die Enteisung wird mit der zuvor beschriebenen Logik aktiviert- automatisches Enteisen bei niedriger Au?entemperatur: das Einschalten der Heckscheibenheizung erfolgt bei niedrigen Au?entemperaturen automatisch.
Den Befehl zum Einschalten der heizbaren Heckscheibe liefert der betreffende Schalter, der sich in der Klimaelektronik M070 befindet (Pin 10, 14 und 15 des Steckers A). Der Befehl wird uber eine CAN-Leitung an den Knoten Body Computer M001 (Pin 6, 8 bzw. 10 des Steckers D) gesendet.Die Elektronik M070 (Pin 1 und 2 des Steckers A) ubermittelt die Information uber die eingeschaltete Heckscheibenheizung auch an die Instrumententafel E050 (Pin 5 bzw. 9) und von dort an die verschiedenen Anzeigen.Der Knoten Body Computer M001 versorgt gleichzeitig:- von Pin 1 und 9 des Steckers H die heizbare Heckscheibe P055 an Pin 1 des Steckers A,- von Pin 9 des Steckers F die Bedienelektronik Fahrertur M066 und Beifahrertur M067, beide an Pin 1 des Steckers A.Den Befehl liefert der Knoten Body Computer M001 (Pin 36 und 38 des Steckers I fur die Fahrerseite bzw. Pin 38 und 40 des Steckers L fur die Beifahrerseite) uber das CAN-Netz an die Tur-Bedienelektronik M066 (Pin 20 und 19 des Steckers A) bzw. M067 (Pin 19 und 20 des Steckers A).Die Elektroniken M066 und M067 (Pin 4 und 5 des Steckers B) versorgen dann ihrerseits: den Heizwiderstand im linken Au?enspiegel P060 (Pin 4 und 5 des Steckers B) und im rechten Au?enspiegel P061 (Pin 4 und 5 des Steckers B).
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
B001 | VERTEILER IM MOTORRAUM | |
C020 | MASSE ARMATURENBRETT BEIFAHRERSEITE | - |
C031 | MASSE HINTEN RECHTS | - |
D030 | VERBINDUNG FAHRERTUR | - |
D031 | VERBINDUNG BEIFAHRERTUR | - |
D085 | VERBINDUNG HINTEN/HECKKLAPPE | - |
E050 | INSTRUMENTENTAFEL | |
M001 | BODY COMPUTER | |
M066 | TURBEDIENELEKTRONIK FAHRERSEITE (NPG) | |
M067 | TURBEDIENELEKTRONIK BEIFAHRERSEITE (NPP) | - |
M070 | KLIMAELEKTRONIK | - |
P055 | HEIZBARE HECKSCHEIEB | |
P060 | LINKER AUSSENSPIEGEL | Arbeit. 7005R ELEKTRISCH VERSTELLBARE AUSSENSPIEGEL AN DEN VORDERTUREN |
P061 | RECHTER AUSSENSPIEGEL | Arbeit. 7005R ELEKTRISCH VERSTELLBARE AUSSENSPIEGEL AN DEN VORDERTUREN |