Bauteile - LEUCHTWEITENREGELUNG - Fiat ULYSSE 2.2 16V JTD da 04/03
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
A001 | BATTERIE | - |
B001 | VERTEILER IM MOTORRAUM | |
C010 | MASSE VORNE LINKS | - |
C011 | MASSE VORNE RECHTS | - |
C015 | MASSE ARMATURENBRETT FAHRERSEITE | - |
C020 | MASSE ARMATURENBRETT BEIFAHRERSEITE | - |
D001 | VERBINDUNG VORNE/ARMATURENBRETT | - |
D006 | VORDERE/HINTERE VERBINDUNG | - |
D020 | VERBINDUNG ARMATURENBRETT / HINTEN | - |
E050 | INSTRUMENTENTAFEL | |
F010 | SCHEINWERFER LINKS | |
F011 | SCHEINWERFER RECHTS | |
H001 | Zundschloss | - |
K001 | VORDERES POTENTIOMETER LEUCHTWEITENREGLER (CAF) | - |
K002 | HINTERES POTENTIOMETER LEUCHTWEITENREGLER (CAF) | - |
M001 | BODY COMPUTER | |
M093 | ELEKTRONIK KNOTEN LENKRAD (NVO) | |
M140 | ELEKTRONIK KONTROLLLEUCHTEN UND KILOMETERZAHLER (NSO) | - |
R010 | MEHRFACHDIAGNOSEVERBINDUNG | - |
Das Fahrzeug ist mit zwei Scheinwerfern mit GASENTLADUNG ausgestattet.Im Innern der beiden Scheinwerfer befindet sich eine Elektronik, welche die Funktion steuert. Sie verwendet dazu die Signale der beiden Sensoren (Potentiometer), die sich an den Achsen des Fahrzeugs befinden und die Neigung vorne und hinten erfassen.Je nach Eingang, steuert die Elektronik den entsprechenden Motor - der sich im Scheinwerfer befindet - und regelt diesen entsprechend.Die Leuchtweitenregelung arbeitet nur bei eingeschaltetem Abblendlicht.Die Vorrichtung, die fur das Einschalten des Abblendlichts zustandig ist , versorgt auch die Neigungssensoren, wahrend die Elektronik der beiden Scheinwerfer durch eine Leitung mit einer speziellen Sicherung versorgt wird.768 Bei der Version mit Gasentladungsscheinwerfern erfolgt die Leuchtweitenregelung automatisch: die beiden Tasten auf der linken Seite des Armaturenbrettes sind dann nicht mehr aktiv. Die Elektroniken der Scheinwerfer verfugen uber eine Eigendiagnosefunktion. Durch den Anschluss eines geeigneten Diagnosegerats - an den Diagnosestecker auf der linken Seite des Armaturenbretts - konnen die Daten (Parameter, Defekte) ausgelesen oder eine aktive Diagnose ausgefuhrt werden.
Die Stromversorgung der automatischen Leuchtweitenregelung erfolgt nur bei eingeschaltetem Abblendlicht.Die Sensoren K001 (Pin 5) und K002 (Pin 2, 5), welche die Trimmung des Fahrzeuges kontrollieren, werden vom Verteiler im Motorraum B001 (Pin 25 Stecker G) mit Strom versorgt.Pin 1 von K002 und Pin 1, 2 von K001 liegen an Masse.Von den Pins 4 liefern die Sensoren K001 und K002 der in die Scheinwerfer F010 und F011 integrierten Elektronik - Pin 7 - die Informationen bezuglich der Fahrzeugneigung. Die E-Motoren korrigieren automatisch den Lichtkegel der Scheinwerfer abhangig von den erhaltenen Daten.Die Elektronik wird auch an den Pins 9 von F010 und F011 vom Verteiler im Motorraum B001 (Pin 20 des Steckers F) uber die Leitung mit der Sicherung F01 im gleichen Verteiler mit Strom versorgt.Das Auslesen der Eigendiagnosedaten der beiden Elektroniken erfolgt durch Anschluss an Diagnosestecker R010 (Pin 13): hier kommen die Signale an von Pin 5 in F010 und F011.
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
A001 | BATTERIE | - |
B001 | VERTEILER IM MOTORRAUM | |
C010 | MASSE VORNE LINKS | - |
C011 | MASSE VORNE RECHTS | - |
C015 | MASSE ARMATURENBRETT FAHRERSEITE | - |
C020 | MASSE ARMATURENBRETT BEIFAHRERSEITE | - |
D001 | VERBINDUNG VORNE/ARMATURENBRETT | - |
D006 | VORDERE/HINTERE VERBINDUNG | - |
D020 | VERBINDUNG ARMATURENBRETT / HINTEN | - |
E050 | INSTRUMENTENTAFEL | |
F010 | SCHEINWERFER LINKS | |
F011 | SCHEINWERFER RECHTS | |
H001 | Zundschloss | - |
K001 | VORDERES POTENTIOMETER LEUCHTWEITENREGLER (CAF) | - |
K002 | HINTERES POTENTIOMETER LEUCHTWEITENREGLER (CAF) | - |
M001 | BODY COMPUTER | |
M093 | ELEKTRONIK KNOTEN LENKRAD (NVO) | |
M140 | ELEKTRONIK KONTROLLLEUCHTEN UND KILOMETERZAHLER (NSO) | - |
R010 | MEHRFACHDIAGNOSEVERBINDUNG | - |