Schaltplan - PARKSENSOR - Fiat ULYSSE 2.2 16V JTD da 04/03
Bauteile - PARKSENSOR - Fiat ULYSSE 2.2 16V JTD da 04/03
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
B001 | Verteiler im Motorraum | 5505A |
C031 | Masse hinten rechts | - |
D073 | Verbindung Anhanger (Vorbereitung) | - |
D089 | Verbindung Parksensor | - |
K097 | Baugruppe Parksensoren | - |
M001 | Body Computer | 5505A |
M084 | Elektronik Parksensor | - |
P044 | Lautsprecher fur Parksensor | - |
Einbaulage Bauteile - PARKSENSOR - Fiat ULYSSE 2.2 16V JTD da 04/03
Bauteile - PARKSENSOR - Fiat ULYSSE 2.2 16V JTD da 04/03
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
B001 | Verteiler im Motorraum | 5505A |
C031 | Masse hinten rechts | - |
D073 | Verbindung Anhanger (Vorbereitung) | - |
D089 | Verbindung Parksensor | - |
K097 | Baugruppe Parksensoren | - |
M001 | Body Computer | 5505A |
M084 | Elektronik Parksensor | - |
P044 | Lautsprecher fur Parksensor | - |
Beschreibung - PARKSENSOR - Fiat ULYSSE 2.2 16V JTD da 04/03
Es handelt sich um eine Vorrichtung, die das Einparken so leicht wie moglich macht: sie meldet dem Fahrer bei eingelegtem RG die Annaherung an ein Hindernis, das au?erhalb des Sichtbereichs liegen kann.Die Anlage arbeitet wie ein "Sonar" mit Ultraschall: vier Ultraschallwandler sind im Innern der hinteren Sto?stange befestigt. Diese Wandler senden Signale zu einer Steuerelektronik, die den Abstand zu eventuellen Hindernissen errechnet.Ein akustischer Signalgeber sendet intermittierende Tone proportional zur Entfernung zum Hindernis.Die Elektronik wird bei eingelegtem RG aktiviert: sie aktiviert die Wandler, fragt das Signal ab und erhalt die Antwortsignale.Uber den entsprechenden Lautsprecher gibt die Elektronik ein unterbrochenes Schallzeichen ab: die Frequenz des Schallzeichens nimmt allmahlich zu, wenn sich die Stossstange einem Hindernis nahert: Unter 25 cm wird das Schallzeichen zum Dauerton.Wenn der gemessene Abstand zunimmt oder der Fahrer den Ruckwartsgang ausschaltet, hort das Schallzeichen auf. Bleibt der Abstand zum Hindernis unverandert, dann hort das Schallzeichen nach etwa 3 s auf.Das Signal uber das erfolgte Einlegen des RG < R1 > wird vom Body Computer gesteuert, der diese Information uber das CAN-Netz auch der Elektronik Parksensoren sendet.
Funktionsbeschreibung - PARKSENSOR - Fiat ULYSSE 2.2 16V JTD da 04/03
Beim Einlegen des RG kommt der entsprechende Befehl vom Schalter I020 auf dem Getriebegehause. Der Schalter erhalt seine Stromversorgung vom Verteiler im Motorraum B001 (Pin 10 des Steckers C) uber die Leitung mit der Sicherung F01 im gleichen Verteiler. Wird der RG eingelegt, schlie?t der Kontakt im Schalter I020 und sendet das Signal an den Knoten Body Computer M001 (Pin 5 des Steckers B).Bei Versionen mit Automatikgetriebe ist der RG-Schalter am Getriebe nicht vorhanden, dessen Funktion wird jedoch durch einen entsprechenden "R"-Kontakt der E-Ventilbaugruppe Automatikgetriebe L050 wahrgenommen.Wenn der Knoten Body Computer M001 den Befehl erhalt, schlie?t der Kontakt des Relais und versorgt (Pin 3 des Steckers H) uber die mit der Sicherung F24 geschutzte Leitung die Elektronik Parksensoren M084 (Pin 1 des Steckers A). Die Elektronik M084 ist an Pin 7 des Steckers A mit der Masse verbunden.Von den Pins 2 und 10 steuert die Elektronik M084 den Lautsprecher P044 an, der sowohl als akustischer Signalgeber fur die Anzeige des eingelegten RG als auch fur die Parksensoren verwendet wird.Vom Stecker B empfangt die Einparkelektronik M084 die Daten der Parksensorenbaugruppe K097, die sich an der hinteren Stossstange befindet und den Abstand zwischen dem Fahrzeug und einem evtl. Hindernis ermittelt.An Pin 12 kommt ein Signal zum Sperren der Anlage an, falls ein Anhanger an die Verbindung D73 angeschlossen wird.Der Stecker D73 wird auch vom Knoten Body Computer M001 uber die Leitung mit der Sicherung F10 mit Strom versorgt.