Bauteile - KLIMAANLAGE - Fiat ULYSSE 2.2 16V JTD da 04/03
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
A001 | BATTERIE | - |
B001 | VERTEILER IM MOTORRAUM | |
C011 | MASSE VORNE RECHTS | - |
C016 | MASSE KLIMAANLAGE | - |
C020 | MASSE ARMATURENBRETT BEIFAHRERSEITE | - |
D008 | VERBINDUNG VORNE/KLIMAANLAGE UND HEIZUNG | - |
E050 | INSTRUMENTENTAFEL | |
H001 | Zundschloss | |
H081 | BETATIGUNG ELEKTROLUFTER DER KLIMAANLAGE | |
J035 | RELAIS ELEKTROLUFTER FAHRZEUGINNENRAUMBELUFTUNG | - |
M001 | BODY COMPUTER | |
M070 | KLIMAELEKTRONIK | - |
N080 | STELLER LUFTVERTEILKLAPPE | |
N081 | STELLER MISCHLUFTKLAPPE | |
N082 | STELLER FRISCHLUFT-/UMLUFTKLAPPE | |
N085 | INNENRAUMLUFTER | - |
Das Fahrzeug verfugt uber eine Klimaanlage zur Verwaltung der Temperatur, der Luftmenge, der Luftverteilung und der Umluft.Die Elektronik verwaltet die Systemfunktion fur:
Die Elektronik der Klimaanlage M070 (Pin 12 und 10 des Steckers A) erhalt die Stromversorgung durch zwei Leitungen, die beide aus dem Knoten Body Computer M001 (Pin 1 des Steckers G und Pin 6 des Steckers D) kommen und von denen nur eine (die zweite) mit Sicherung F14 geschutzt ist.Die Elektronik M070 kommuniziert uber das CAN-Netz (Pin 14 und 15 des Steckers A) mit der Instrumententafel E050 (Pin 6 und 12) und dem Knoten Body Computer M001 (Pin 8 und 10 des Steckers D).Der Knoten Body Computer M001 (Pin 5 des Steckers E) erzeugt das Freigabesignal, das zum Relais J035 (Pin 1) gesendet wird. Dieses erhalt (Pin 3) die Stromversorgung von einer Leitung mit der Sicherung MF01 im Verteiler im Motorraum B001 (Pin 1 des Steckers D) und versorgt seinerseits (Pin 5) den E-Lufter H081 (Pin B des Steckers A).Die Bedienung des E-Lufters H081 (Pin 1 des Steckers B) wird von der Elektronik der Klimaanlage M070 (Pin 2 des Steckers B) gesteuert und steuert ihrerseits (Pin 1 der Stecker C und D) den Innenraumlufter N085 (Pin 1 der Stecker A und B). Im Inneren von H081 befindet sich eine Elektronik, welche die Lufterdrehzahl je nach Stellung des Wahlschalters steuert.Die Elektronik der Klimaanlage M070 (Pin 4, 5, 6 des Steckers B) versorgt (Pin 1) die Motoren fur die Luftverteilung N080, fur die Luftmischung N081 und fur die Frischluftzufuhr/Umluft N082.Die drei Motoren verwenden gemeinsam die Pins 3, 4, 5 und 6 und sind mit denselben Pins des Steckers C der Klimaanlagenelektronik M070 verbunden.Die Elektronik M070 ist (Pin 16, 1, 2, 3, 18 und 10 des Steckers A) mit der Instrumententafel E050 (Pin 7, 5, 9, 2, 10 und 13) verbunden, um den verschiedenen Displays einige Informationen mitzuteilen (Heckscheibenheizung eingeschaltet, Klimaanlage eingeschaltet usw.).
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
A001 | BATTERIE | - |
B001 | VERTEILER IM MOTORRAUM | |
C011 | MASSE VORNE RECHTS | - |
C016 | MASSE KLIMAANLAGE | - |
C020 | MASSE ARMATURENBRETT BEIFAHRERSEITE | - |
D008 | VERBINDUNG VORNE/KLIMAANLAGE UND HEIZUNG | - |
E050 | INSTRUMENTENTAFEL | |
H001 | Zundschloss | |
H081 | BETATIGUNG ELEKTROLUFTER DER KLIMAANLAGE | |
J035 | RELAIS ELEKTROLUFTER FAHRZEUGINNENRAUMBELUFTUNG | - |
M001 | BODY COMPUTER | |
M070 | KLIMAELEKTRONIK | - |
N080 | STELLER LUFTVERTEILKLAPPE | |
N081 | STELLER MISCHLUFTKLAPPE | |
N082 | STELLER FRISCHLUFT-/UMLUFTKLAPPE | |
N085 | INNENRAUMLUFTER | - |