ENGINE PERFORMANCE – Nissan 200SX SE-R 1998 – SYSTEM WIRING DIAGRAMS

ENGINE PERFORMANCE

1.6L

1.6L, Engine Performance Wiring Diagrams (1 of 3) for Nissan 200SX SE-R 1998

List of elements for 1.6L, Engine Performance Wiring Diagrams (1 of 3) for Nissan 200SX SE-R 1998:

• (a/t)
• (behind dash, next to fuse block) data link connector (for consult)
• (right side of dash)
• (tach)
• (top left rear of vehicle) evap control system pressure sensor
• (top of fuel tank)
• (under left dash panel, near fuse box cover) data link connector (for gst)
• 7.5a
• Absolute pressure sensor (center of firewall)
• Air conditioning system
• Cooling fans system
• Crankshaft position sensor (on transmission housing, facing flywheel gear teeth)
• Defogger system
• Eccs control module (ecm) (below center of dash)
• Eccs relay (below center of dash, next to ecm)
• Egr temper- ature sensor (on top right rear of eng)
• Engine coolant temperature sensor (on top right front of eng)
• Evap canister purge volume control valve (on right side of eng)
• Front heated oxygen sensor (on exhaust manifold)
• Fuel tank gauge unit (tank fuel temperure sensor)
• Fuse 41
• Fusible link & fuse box (left front of engine compt)
• G201
• Headlights system
• Hot at all times
• Instrument cluster system
• Intake air temperature sensor (left front corner of eng compt, in air duct housing)
• Knock sensor (on right side of cylinder block)
• Map/baro switch switch switch solenoid valve solenoid valve solenoid valve (top right (top right (top right sid eof engine) sid eof engine) sid eof engine)
• Mass airflow sensor (on air intake assembly, next to air cleaner box)
• Nca
• Pnk
• Red
• Throttle position sensor (on throttle body assembly)

1.6L, Engine Performance Wiring Diagrams (2 of 3) for Nissan 200SX SE-R 1998

List of elements for 1.6L, Engine Performance Wiring Diagrams (2 of 3) for Nissan 200SX SE-R 1998:

• (behind right headlamp)
• 15k
• A/t
• Camshaft position sensor
• Condenser
• Diode (behind left side of glove box, taped to harness)
• Distri- butor
• Fuse 10a
• Fuse 7.5a
• Fuse block
• Fuse12 10a
• G107
• G201 (right side of dash)
• Hot at all times
• Hot in start
• Hot in start or on
• Ignition coil
• Inhibitor switch (closed in park or neutral) (on left side of transaxle)
• J/c 1 (behind center of dash, taped to harness)
• J/c 2 (behind center of dash, taped to harness)
• M/t
• Nca
• Neutral position switch (on right front of transaxle)
• Off
• Overdrive switch
• Pnk
• Power steering oil presure switch (on right rear corner of eng compt, on power steering high pressure tube)
• Power transistor
• Resistor (on rear of eng, near radiator)
• Tcc
• Torque converter clutch/ overdrive cancel solenoid valves (in transaxle, on control valve lower body)
• W/ automatic speed control device (ascd)
• W/o automatic speed control device (ascd)

1.6L, Engine Performance Wiring Diagrams (3 of 3) for Nissan 200SX SE-R 1998

List of elements for 1.6L, Engine Performance Wiring Diagrams (3 of 3) for Nissan 200SX SE-R 1998:

• 10n
• 1o1
• Acc
• Eccs control module (ecm) (below center of dash)
• Egrc solenoid valve (on right rear of eng)
• Electronic speedo- meter
• Evap canister purge control solenoid valve (on top right side of eng)
• Evap canister vent control valve (on left rear underside of vehicle)
• Fuel injectors
• Fuel pump (in fuel tank)
• Fuel pump relay (behind left side of dash)
• Fuse 10a
• Fuse 15a
• Fuse block
• G120 (right side of eng)
• G201 (right side of dash)
• G407 (center rear of trunk)
• Hot at all times
• Hot in on or start
• Iacv-aac valve (on right rear of eng)
• Ignition switch
• Instrument cluster
• Intake valve timing control solenoid valve (on top front of eng)
• Malfunction indicator lamp
• Nca
• Off
• Pnk
• Rear heated oxygen sensor (rear of catalytic converter)
• Red
• Start
• Vacuum cut valve bypass valve (on left rear underside of vehicle)
• Vehicle speed sensor (top right side of transaxle)
• W/ tach
• W/o tach

2.0L

2.0L, Engine Performance Wiring Diagrams (1 of 3) for Nissan 200SX SE-R 1998

List of elements for 2.0L, Engine Performance Wiring Diagrams (1 of 3) for Nissan 200SX SE-R 1998:

• (a/t only)
• (behind dash, next to fuse block) data link connector (for consult)
• (behind left kick panel)
• (on top right side of eng) evap canister purge volume control valve
• (right side of dash) g201
• (under left dash panel, near fuse box cover) data link connector (for gst)
• 7.5a
• Absolute pressure sensor (center of firewall)
• Air condi- tioning system
• Cooling fans system
• Crankshaft position sensor (on transaxle housing, facing flywheel teeth)
• Eccs control module (ecm) (below center of dash)
• Eccs relay (below center of dash, next to ecm)
• Egr temper- ature sensor (on top right rear of eng)
• Engine coolant temperature sensor (on top right side of eng)
• Front heated oxygen sensor (on exhaust manifold)
• Fuse 41
• Fusible link & fuse box (left front of engine compt)
• Hot at all times
• Instrument cluster system (tach)
• Intake air temperature sensor (at left front corner of eng compt, on air duct housing)
• Knock sensor (on right side of cylinder block)
• Mass airflow sensor (on air intake assembly, next to air cleaner box)
• Nca
• Pnk
• Transmission contol module

2.0L, Engine Performance Wiring Diagrams (2 of 3) for Nissan 200SX SE-R 1998

List of elements for 2.0L, Engine Performance Wiring Diagrams (2 of 3) for Nissan 200SX SE-R 1998:

• (behind center of dash, taped to harn) j/c 1
• (behind center of dash, taped to harn) j/c 2
• (on throttle assembly, integral to throttle position sensor) throttle position switch
• (on throttle body assembly) throttle position sensor)
• (right rear corner of eng compt, on power steering high pressure tube) power steering oil pressure switch
• Acc
• Cam- shaft position sensor
• Closed
• Condenser
• Distri- butor
• Evap control system pressure sensor (on left rear underside of vehicle)
• Fuel tank gauge unit (top of fuel tank)
• G402 (above left rear wheelwell)
• Hot at all times
• Ignition coil
• Ignition switch
• Nca
• Off
• Pnk
• Power transistor
• Resistor (rear of eng, near distributor)
• Start
• Wide open

2.0L, Engine Performance Wiring Diagrams (3 of 3) for Nissan 200SX SE-R 1998

List of elements for 2.0L, Engine Performance Wiring Diagrams (3 of 3) for Nissan 200SX SE-R 1998:

• (behind right headlamp)
• 10n
• 15k
• 1o1
• A/t
• Dropping resistor (at right rear corner of trunk)
• Eccs control module (ecm) (below center of dash)
• Egrc solenoid valve (on right side of eng)
• Electronic speedo- meter
• Evap canister purge control solenoid valve (on top rear of eng)
• Evap canister vent control valve (on left rear underside of vehicle)
• Fuel injectors
• Fuel pump (in fuel tank)
• Fuel pump control module (at right rear corner of trunk)
• Fuel pump relay (behind left side of dash)
• Fuse 10a
• Fuse 12 10a
• Fuse 17 15a
• Fuse 18 10a
• Fuse 7.5a
• Fuse block (behind dash, left of steering column)
• G107
• G112 (left side of eng)
• G201 (right side of dash)
• G402 (above left rear wheelwell)
• Hot at all times
• Hot in on or start
• Hot in start
• Hot in start or on
• Iacv-aac valve (on top right front of eng)
• Iacv-air regulator (top front of eng)
• Inhibitor switch (closed in park or neutral) (on left side of transaxle)
• Instrument cluster
• M/t
• Malfunction indicator lamp
• Map/baro switch solenoid valve (on right front side of eng)
• Nca
• Neutral position switch (on right front of transaxle)
• Or on
• Pnk
• Rear heated oxygen sensor (rear of catalytic converter)
• Red
• Vacuum cut valve by-pass valve (on left rear underside of vehicle)
• Vehicle speed sensor (top right side of transaxle)