ENGINE PERFORMANCE – Nissan Altima SE 1998 – SYSTEM WIRING DIAGRAMS

ENGINE PERFORMANCE

2.4L

2.4L, Engine Performance Wiring Diagrams (1 of 3) for Nissan Altima SE 1998

List of elements for 2.4L, Engine Performance Wiring Diagrams (1 of 3) for Nissan Altima SE 1998:

• (behind left side of dash) data link connector (for consult)
• (behind left side of dash) data link connector (for gst)
• Absolute pressure sensor (on eng air duct, near air cleaner)
• Air conditioning system
• Cooling fans system
• Defogger system
• Eccs control module (ecm) (behind instrument panel lower cover)
• Eccs relay (behind instrument panel lower cover)
• Egr temper- ature sensor (near base of egr valve)
• Engine coolant temperature sensor (left side of eng, near fuel inj 1)
• Evap canister purge volume control solenoid valve (top right side of eng)
• Evap control system pressure sensor (under left rear corner of vehicle)
• Fuel tank gauge unit (tank fuel temp sensor) (in fuel tank)
• Fuse & fusible link box (left side of engine compt)
• Fuse 10a
• G202 (left kick panel)
• G904 (left "c" pillar)
• Headlight system
• Hot at all times
• Instrument cluster system (tach)
• Knock sensor (on right side of eng)
• Map/baro switch solenoid valve (on eng air duct, near air clener)
• Mass airflow sensor (left side of eng compt, in air intake)
• Nca
• Nca nca nca
• Pnk
• Red
• Red red red

2.4L, Engine Performance Wiring Diagrams (2 of 3) for Nissan Altima SE 1998

List of elements for 2.4L, Engine Performance Wiring Diagrams (2 of 3) for Nissan Altima SE 1998:

• (on throttle body) throttle position sensor & switch
• (under front of center console) transmission control module
• 15k
• A/t
• Acc
• Camshaft position sensor
• Closed
• Condenser
• Crankshaft position sensor (left front of transaxle housing)
• Distributor
• Dropping resistor (left side of eng compt, near air cleaner)
• Fuse 10a
• Fuse 15a
• Fuse block (left side of dash)
• G100 (front of left front fender)
• Hot at all times
• Hot in on or start
• Hot in start
• Ignition coil
• Ignition switch
• Intake air temperature sensor (left side of eng compt, in air intake)
• M/t
• Nca
• Neutral position switch (on transaxle)
• Off
• Pnk
• Power steering oil pressure switch (attached to power steering high pressure tube)
• Power transistor
• Red
• Start
• Wide open

2.4L, Engine Performance Wiring Diagrams (3 of 3) for Nissan Altima SE 1998

List of elements for 2.4L, Engine Performance Wiring Diagrams (3 of 3) for Nissan Altima SE 1998:

• 10n
• 13k
• 1o1
• Eccs control module (ecm) (behind instrument panel lower cover)
• Egrc solenoid valve (on top right side of eng)
• Evap canister vent control valve (under left rear corner of vehicle)
• Front heated oxygen sensor (on exhaust manifold)
• Fuel injectors
• Fuel pump (in fuel tank)
• Fuel pump relay (behind left side of dash, attached to fuse block)
• Fuse 10a
• Fuse 15a
• Fuse block (left side of dash)
• G131 (on intake manifold)
• G308 (below left "b" pillar)
• Hot in on or start
• Iacv-aac valve (on right front side of eng, below intake manifold)
• Instrument cluster
• Malfunction indicator lamp
• Nca
• Pnk
• Rear heated oxygen sensor (rear of catalytic converter)
• Red
• Speedometer
• Vacuum cut valve by-pass valve (on evap purge line, between fuel tank & evap canister)
• Vehicle speed sensor (on transaxle)