ENGINE PERFORMANCE – Chrysler 300 SRT-8 2008 – SYSTEM WIRING DIAGRAMS

ENGINE PERFORMANCE

2.7L

2.7L, Engine Performance Wiring Diagram (1 of 5) for Chrysler 300 SRT-8 2008

List of elements for 2.7L, Engine Performance Wiring Diagram (1 of 5) for Chrysler 300 SRT-8 2008:

• 87a
• A209
• A804
• Aat sig
• Ambient air temperature sensor (at right front of engine compt)
• Anti-lock brakes module (at right front of engine compt)
• Asd rly out
• Bus (+)
• Bus (-)
• Coil 1 ctrl
• Coil 2 ctrl
• Coil 4 ctrl
• Coil ctrl 3
• Coil ctrl 5
• Coil ctrl 6
• D64
• D65
• Ect sig
• Egr sig
• Egr sol ctrl
• Electronic
• Eop sig
• Etc mtr (+)
• F342
• F856
• F902
• F950
• Fuse 25a
• Fused b(+)
• G102 (at right of engine compt)
• G31
• G931
• Gen field ctrl
• Gen sns
• Ground
• Hot at all times
• Ign off- run- start
• Ign off-run- start
• Inj 1 ctrl
• Inj 2 ctrl
• Inj 3 ctrl
• Inj 4 ctrl
• Inj 5 ctrl
• Inj 6 ctrl
• K10
• K11
• K12
• K124
• K13
• K14
• K141
• K15
• K16
• K17
• K18
• K19
• K199
• K20
• K22
• K243
• K34
• K35
• K38
• K42
• K58
• K900
• K904
• K922
• K942
• K99
• Knock sensor 1 (on rear of engine)
• Ks 1 rtn
• Ks 1 sig
• Map sig
• Nca
• O2 1/1 htr
• O2 1/2 sig
• O2 2/1 htr
• O2 2/2 sig
• O2 rtn (dn)
• Oil pressure switch (on front of engine)
• Pnk
• Powertrain control module (at right rear of engine compt)
• Red
• Right front abs wheel speed sensor (w/ abs) (at right front wheel well)
• Right front wheel speed sensor (w/o abs) (at right front wheel well)
• Run/ start relay
• Run/start rly
• S122 (at right side of engine compt)
• S124 (at right side of engine compt)
• S167
• Sens gnd
• Sens sig
• Sens sply
• Sensor gnd
• Starting/charging system
• Totally integrated power module (at right side of engine compt)
• Tp sens gnd
• Tp sig 1
• Z904

2.7L, Engine Performance Wiring Diagram (2 of 5) for Chrysler 300 SRT-8 2008

List of elements for 2.7L, Engine Performance Wiring Diagram (2 of 5) for Chrysler 300 SRT-8 2008:

• (fuel injector 1: on top right front of engine) (fuel injector 2: on top left front of engine) (fuel injector 3: on top right of engine) (fuel injector 4: on top left of engine) (fuel injector 5: on top right rear of engine) (fuel injector 6: on top left rear of engine)
• (ignition coil 1: on top right front of engine) (ignition coil 2: on top left rear of engine) (ignition coil 3: on top right of engine) (ignition coil 4: on top left rear of engine) (ignition coil 5: on top right rear of engine) (ignition coil 6: on top left rear of engine)
• 87a
• Auto shut down relay
• Etc mtr (+)
• Etc mtr (-)
• Fuel injectors
• Fuel pump relay
• Fuse 20a
• Fuse 25a
• Fuse 5a
• Hot at all times
• Hot in run or start
• Ignition capacitor 2 (on top left of engine)
• Ignition coil capacitor 1 (near breakout for ignition coil 5)
• Ignition coils
• Nca
• Power distribution center (at right rear of trunk)
• Power distribution system
• Red
• S107 (at top of engine)
• S108 (at rear of engine)
• S109
• S143 (in right front inner fender well, in breakout to c100)
• S166
• Throttle body (on top of intake manifold)
• Totally integrated power module (at right side of engine compt)
• Tp sens gnd
• Tp sig 1
• Tp sig 2

2.7L, Engine Performance Wiring Diagram (3 of 5) for Chrysler 300 SRT-8 2008

List of elements for 2.7L, Engine Performance Wiring Diagram (3 of 5) for Chrysler 300 SRT-8 2008:

• (at left rear of engine compt)
• (at right rear of engine compt) s105
• Camshaft position sensor (on top front of engine)
• Ckp sig
• Cmp sig
• Crankshaft position sensor (on right rear of engine)
• Engine coolant temperature sensor (at front of engine)
• Exhaust gas recirculation valve assembly (on rear of engine)
• G102 (at right of engine compt)
• G109 (on right shock tower, near purge solenoid)
• Inlet air temperature sensor (on top of engine)
• Map sig
• Oxygen sensor 1/1 (at right rear of engine)
• Oxygen sensor 1/2 (at left rear of engine)
• Oxygen sensor 2/1 (at left side of engine)
• Oxygen sensor 2/2 (at lower rear of engine)
• S106 (at right rear of engine compt)
• S110 (at right rear of engine compt)
• S112 (at right rear of engine compt)
• S115
• S125
• Sens gnd

2.7L, Engine Performance Wiring Diagram (4 of 5) for Chrysler 300 SRT-8 2008

List of elements for 2.7L, Engine Performance Wiring Diagram (4 of 5) for Chrysler 300 SRT-8 2008:

• A/c clutch ctrl
• Accelerator pedal position sensor (at adjustable pedal assembly)
• Air conditioning system
• Anti-lock brakes system
• App sens gnd 1
• App sens gnd 2
• App sig 1
• App sig 2
• Apps 1 sig
• Asd relay ctrl
• Asd relay out
• B15
• B16
• Brake sig 1
• Brake sig 2
• C13
• Can b bus (+)
• Can b bus (-)
• Ckp sig
• Cluster
• Cmp sig
• Computer data lines system
• Esm sig
• Etc mtr (-)
• Evap prg ctrl
• Evap prg rtn
• Evap system monitor switch (at right rear of wheel well)
• Evaporator purge solenoid (at right of engine compt)
• F342
• F855
• Fuel pump module (on top of fuel tank)
• Fuel pump rly
• G300 (below left "b" pillar)
• G302 (at right front of cargo pan)
• Ground
• Iat sig
• K107
• K122
• K126
• K167
• K21
• K23
• K24
• K29
• K299
• K31
• K399
• K400
• K41
• K43
• K44
• K51
• K52
• K70
• K902
• O2 1/1 sig
• O2 1/2 htr ctrl
• O2 2/1 sig
• O2 2/2 htr ctrl
• O2 rtn (up)
• Powertrain control module (at right rear of engine compt)
• S309 (at left front body)
• Sens 1 sig
• Sens 2 sig
• Sens gnd 1
• Sens gnd 2
• Start rly ctrl
• Starting/ charging system
• Stop lamp switch (at base of brake pedal)
• T752
• Tp sig 2
• Z210
• Z912

2.7L, Engine Performance Wiring Diagram (5 of 5) for Chrysler 300 SRT-8 2008

List of elements for 2.7L, Engine Performance Wiring Diagram (5 of 5) for Chrysler 300 SRT-8 2008:

• (at right of engine compt) g102
• (in engine harness) s113
• 2/4 ctrl
• 2/4 press sig
• 2/4 press sw
• 2/4 sol
• Ctrl output
• Electronic
• Fused b(+)
• Ground
• Hot at all times
• Input spd sig
• Input speed sensor (on right side of transmission)
• L/r ctrl
• L/r press sig
• L/r sol
• Line pres ctrl
• Line pres sig
• Line press sig
• Line pressure sensor/ variable force solenoid assembly (on transmission)
• Low/rev press sw
• Nol
• Od ctrl
• Od press sig
• Od press sw
• Od sol
• Output spd sig
• Output speed sensor (on right side of transmission)
• P3l
• Powertrain control module (at right rear of engine compt)
• Prnl
• S114 (at right rear of engine compt)
• S115
• Sens gnd
• Spd sens gnd
• T118
• T13
• T14
• T15
• T16
• T19
• T20
• T38
• T41
• T42
• T47
• T50
• T52
• T54
• T59
• T60
• Temp sens
• Totally integrated power module (at right side of engine compt)
• Trans ctrl
• Trans ctrl out
• Trans rly ctrl
• Trans tmp sens
• Transmission range sensor (on right side of transmission)
• Transmission solenoid/pressure switch assembly (at top of transmission)
• Trs t1 sig
• Trs t3 sig
• Trs t41 sig(p/n)
• Trs t42 sig
• Ud ctrl
• Ud sol
• Z904

3.5L

3.5L, Engine Performance Wiring Diagram (1 of 5) for Chrysler 300 SRT-8 2008

List of elements for 3.5L, Engine Performance Wiring Diagram (1 of 5) for Chrysler 300 SRT-8 2008:

• (on front of engine) oil pressure switch
• 5v sply
• 87a
• A209
• A804
• Aat sig
• Ambient air temperature sensor (at right front of engine compt)
• Anti-lock brakes module (at right front of engine compt)
• Asd rly out
• Bus (+)
• Bus (-)
• Coil 1 ctrl
• Coil 2 ctrl
• Coil 4 ctrl
• Coil ctrl 3
• Coil ctrl 5
• Coil ctrl 6
• D64
• D65
• Ect sig
• Egr sig
• Egr sol ctrl
• Electronic
• Eop sig
• Etc mtr (+)
• F342
• F856
• F902
• F950
• Fuse 25a
• Fused b(+)
• G102 (at right of engine compt)
• G31
• G931
• Gen field ctrl
• Gen sns
• Ground
• Hot at all times
• Ign off- run- start
• Ign off-run- start
• Inj 1 ctrl
• Inj 2 ctrl
• Inj 3 ctrl
• Inj 4 ctrl
• Inj 5 ctrl
• Inj 6 ctrl
• K10
• K11
• K12
• K124
• K13
• K14
• K141
• K15
• K16
• K17
• K18
• K19
• K199
• K20
• K22
• K235
• K236
• K243
• K34
• K35
• K38
• K42
• K58
• K900
• K904
• K922
• K942
• K99
• Knock sensor 1
• Ks 1 rtn
• Ks 1 sig
• Map sig
• Nca
• O2 1/1 htr
• O2 1/2 sig
• O2 2/1 htr
• O2 2/2 sig
• O2 rtn (dn)
• Pnk
• Powertrain control module (at right rear of engine compt)
• Red
• Right front abs wheel speed sensor (w/ abs) (at right front wheel well)
• Right front wheel speed sensor (w/o abs) (at right front wheel well)
• Run/ start relay
• Run/start rly
• S122 (at right side of engine compt)
• S124 (at right side of engine compt)
• S167
• Sens gnd
• Sens sig
• Sens sply
• Sensor gnd
• Short runner valve solenoid (on top of engine)
• Srv ctrl
• Srv sig
• Starting/charging system
• Totally integrated power module (at right side of engine compt)
• Tp sens gnd
• Tp sig 1
• W/ 4 speed transmission
• W/ 5 speed transmission
• Z904

3.5L, Engine Performance Wiring Diagram (2 of 5) for Chrysler 300 SRT-8 2008

List of elements for 3.5L, Engine Performance Wiring Diagram (2 of 5) for Chrysler 300 SRT-8 2008:

• (fuel injector 1: on top right front of engine) (fuel injector 2: on top left front of engine) (fuel injector 3: on top right of engine) (fuel injector 4: on top left of engine) (fuel injector 5: on top right rear of engine) (fuel injector 6: on top left rear of engine)
• (ignition coil 1: on top right front of engine) (ignition coil 2: on top left side of engine) (ignition coil 3: on top right of engine) (ignition coil 4: on top left of engine) (ignition coil 5: on top right rear of engine) (ignition coil 6: on top left side of engine)
• (near right rear of engine)
• 5v sply
• 87a
• Auto shut down relay
• Etc mtr (+)
• Etc mtr (-)
• Fuel injectors
• Fuel pump relay
• Fuse 20a
• Fuse 25a
• Fuse 5a
• Hot at all times
• Hot in run or start
• Ignition capacitor 1 (near breakout for ignition coil 5)
• Ignition coils
• Nca
• Power distribution center (at right rear of trunk)
• Power distribution system
• Red
• S107 (between breakouts for fuel injectors 3 & 5)
• S108 (between breakouts for fuel injector no 4 & 6)
• S109
• S143 (in right front inner fender well, in breakout to c100)
• S166
• Sens gnd
• Throttle body (on top of intake manifold)
• Totally integrated power module (at right side of engine compt)
• Tp sig 1
• Tp sig 2

3.5L, Engine Performance Wiring Diagram (3 of 5) for Chrysler 300 SRT-8 2008

List of elements for 3.5L, Engine Performance Wiring Diagram (3 of 5) for Chrysler 300 SRT-8 2008:

• (at left rear of engine compt)
• (on engine near breakout for ignition coil 5) s105
• 5v sply
• Camshaft position sensor (on top front of engine)
• Ckp sig
• Cmp sig
• Crankshaft position sensor (on right rear of engine)
• Engine coolant temperature sensor (at front of engine)
• Exhaust gas recirculation valve assembly (on rear of engine)
• G102 (at right of engine compt)
• G102 (at right side of engine compt)
• G109 (on right shock tower, near purge solenoid)
• Inlet air temperature sensor (on top of engine)
• Manifold absolute pressure sensor (on top of engine) 5v sply
• Map sig
• Oxygen sensor 1/1 (at right rear of engine)
• Oxygen sensor 1/2 (at left rear of engine)
• Oxygen sensor 2/1 (at left side of engine)
• Oxygen sensor 2/2 (at lower rear of engine)
• S106 (at right rear of engine compt)
• S110 (at rear of engine compt)
• S111
• S112 (at right rear of engine compt)
• S115
• S125
• Sens gnd

3.5L, Engine Performance Wiring Diagram (4 of 5) for Chrysler 300 SRT-8 2008

List of elements for 3.5L, Engine Performance Wiring Diagram (4 of 5) for Chrysler 300 SRT-8 2008:

• A/c clutch ctrl
• Accelerator pedal position sensor (at adjustable pedal assembly)
• Air conditioning system
• Anti-lock brakes system
• App sens gnd 1
• App sens gnd 2
• App sig 1
• App sig 2
• Apps 1 sig
• Asd relay ctrl
• Asd relay out
• B15
• B16
• Brake sig 1
• Brake sig 2
• C13
• Can b bus (+)
• Can b bus (-)
• Ckp sig
• Cluster
• Cmp sig
• Computer data lines system
• Esm sig
• Etc mtr (-)
• Evap prg ctrl
• Evap prg rtn
• Evap system monitor switch (at right rear of wheel well)
• Evaporator purge solenoid (at right of engine compt)
• F342
• F855
• Fuel pump module (on top of fuel tank)
• Fuel pump rly
• G300 (below left "b" pillar)
• G302 (at right front of cargo pan)
• Ground
• Iat sig
• K107
• K122
• K126
• K167
• K21
• K23
• K24
• K29
• K299
• K31
• K399
• K400
• K41
• K43
• K44
• K51
• K52
• K70
• K902
• O2 1/1 sig
• O2 1/2 htr ctrl
• O2 2/1 sig
• O2 2/2 htr ctrl
• O2 rtn (up)
• Powertrain control module (at right rear of engine compt)
• S309 (at left front body)
• Sens 1 sig
• Sens 2 sig
• Sens gnd 1
• Sens gnd 2
• Start rly ctrl
• Starting/ charging system
• Stop lamp switch (at base of brake pedal)
• T752
• Tp sig 2
• Z210
• Z912

3.5L, Engine Performance Wiring Diagram (5 of 5) for Chrysler 300 SRT-8 2008

List of elements for 3.5L, Engine Performance Wiring Diagram (5 of 5) for Chrysler 300 SRT-8 2008:

• (at right of engine compt) g102
• (in engine harness) s113
• 2/4 ctrl
• 2/4 press sig
• 2/4 press sw
• 2/4 sol
• Ctrl output
• Electronic
• Fused b(+)
• Ground
• Hot at all times
• Input spd sig
• Input speed sensor (on right side of transmission)
• L/r ctrl
• L/r press sig
• L/r sol
• Line pres ctrl
• Line pres sig
• Line press sig
• Line pressure sensor/ variable force solenoid assembly (on transmission)
• Low/rev press sw
• Nol
• Od ctrl
• Od press sig
• Od press sw
• Od sol
• Output spd sig
• Output speed sensor (on right side of transmission)
• P3l
• Powertrain control module (at right rear of engine compt)
• Prnl
• S114 (at right rear of engine compt)
• S115
• Sens gnd
• Spd sens gnd
• T118
• T13
• T14
• T15
• T16
• T19
• T20
• T38
• T41
• T42
• T47
• T50
• T52
• T54
• T59
• T60
• Temp sens
• Totally integrated power module (at right side of engine compt)
• Trans ctrl
• Trans ctrl out
• Trans rly ctrl
• Trans tmp sens
• Transmission range sensor (on right side of transmission)
• Transmission solenoid/pressure switch assembly (at top of transmission)
• Trs t1 sig
• Trs t3 sig
• Trs t41 sig(p/n)
• Trs t42 sig
• Ud ctrl
• Ud sol
• Z904

5.7L

5.7L, Engine Performance Wiring Diagram (1 of 4) for Chrysler 300 SRT-8 2008

List of elements for 5.7L, Engine Performance Wiring Diagram (1 of 4) for Chrysler 300 SRT-8 2008:

• (top center of engine) multi displacement system solenoids
• 87a
• A209
• A804
• Aat sig
• Ambient air temperature sensor (at right front of engine compt)
• Anti-lock brakes module (w/ esp) (at right front of engine compt)
• Asd relay out
• Bus (+)
• Bus (-)
• Can c bus (+)
• Can c bus (-)
• Coil 1 ctrl
• Coil 2 ctrl
• Coil 3 ctrl
• Coil 4 ctrl
• Coil 5 ctrl
• Coil 6 ctrl
• Coil 7 ctrl
• Coil 8 ctrl
• D64
• D65
• Ect sig
• Egr sig
• Egr sol ctrl
• Electronic
• Eop sig
• Etc mtr (+)
• F342
• F856
• F902
• F950
• Fuse 25a
• Fused b(+)
• G102 (at right of engine compt)
• G31
• G931
• Gen field ctrl
• Gen sns
• Ground
• Hot at all times
• Ign off- run- start
• Ign off-run- start
• Inj 1 cntrl
• Inj 2 ctrl
• Inj 3 ctrl
• Inj 4 ctrl
• Inj 5 ctrl
• Inj 6 ctrl
• Inj 7 ctrl
• Inj 8 ctrl
• K10
• K11
• K12
• K124
• K13
• K14
• K141
• K15
• K16
• K17
• K18
• K19
• K199
• K20
• K22
• K243
• K26
• K28
• K34
• K35
• K38
• K42
• K452
• K453
• K58
• K900
• K904
• K922
• K942
• K97
• K98
• K99
• Knock sensor 1 (on rear of engine)
• Ks 1 rtn
• Ks 1 sig
• Map sig
• Mds 4 ctrl
• Mds 6 ctrl
• Nca
• O2 1/1 htr
• O2 1/2 sig
• O2 2/1 htr
• O2 2/2 sig
• O2 rtn (dn)
• Pnk
• Powertrain control module (at right rear of engine compt)
• Red
• Right front abs wheel speed sensor (w/ abs) (at right front wheel well)
• Right front wheel speed sensor (w/o abs) (at right front wheel well)
• Run/ start relay
• Run/start rly
• S122 (at right side of engine compt)
• S124 (at right side of engine compt)
• S136
• S167
• Sens gnd
• Sens sig
• Sens sply
• Sensor gnd
• Sig
• Sply
• Starting/ charging system
• Starting/charging system
• Totally integrated power module (at right side of engine compt)
• Tp sens gnd
• Tp sig 1
• Z904

5.7L, Engine Performance Wiring Diagram (2 of 4) for Chrysler 300 SRT-8 2008

List of elements for 5.7L, Engine Performance Wiring Diagram (2 of 4) for Chrysler 300 SRT-8 2008:

• (fuel injector 1: on top left front of engine) (fuel injector 2: on top right front of engine) (fuel injector 3: on top left of engine) (fuel injector 4: on top right of engine) (fuel injectors 5 & 7: on top left rear of engine) (fuel injectors 6 & 8: on top right rear of engine)
• (ignition coil 1: on top left rear of engine) (ignition coil 2: on top right rear of engine) (ignition coil 3: on top left rear of engine) (ignition coil 4: on top right of engine) (ignition coils 5 & 7: on top left rear of engine) (ignition coils 6 & 8: on top right rear of engine)
• 5v sply
• 87a
• Auto shut down relay
• Etc mtr (+)
• Etc mtr (-)
• Fuel injectors
• Fuel pump relay
• Fuse 20a
• Fuse 25a
• Fuse 5a
• Hot at all times
• Hot in run or start
• Ignition coil
• Ignition coil capacitor 2
• Nca
• Power distribution center (at right rear of trunk)
• Power distribution system
• Red
• S107 (on top of engine)
• S108 (at top of engine between fuel injectors 5 & 7)
• S109 (at right rear of engine)
• S166
• Sens gnd
• Throttle body (on top of intake manifold)
• Totally integrated power module (at right side of engine compt)
• Tp 1 sig
• Tp 2 sig

5.7L, Engine Performance Wiring Diagram (3 of 4) for Chrysler 300 SRT-8 2008

List of elements for 5.7L, Engine Performance Wiring Diagram (3 of 4) for Chrysler 300 SRT-8 2008:

• (at left rear of engine compt)
• (at rear of engine) s105
• Camshaft position sensor (on top front of engine) 5v sply
• Ckp sig
• Cmp sig
• Crankshaft position sensor (on right rear of engine) 5v sply
• Engine coolant temperature sensor
• Exhaust gas recirculation valve assembly (on right front of engine)
• G102 (at right of engine compt)
• G109 (on right shock tower, near purge solenoid)
• Inlet air temperature sensor (on top of engine)
• Manifold absolute pressure sensor (on top of engine) sens gnd
• Map sig
• Oil pressure sensor (on right front of engine)
• Oil temperature sensor (on right rear of engine)
• Oxygen sensor 1/1 (at left rear of engine)
• Oxygen sensor 1/2 (at left rear of engine)
• Oxygen sensor 2/1 (at right side of engine)
• Oxygen sensor 2/2 (at lower rear of engine)
• S106 (at right rear of engine compt)
• S110 (at right rear of engine compt)
• S112 (at right rear of engine compt)
• S115
• S125
• Sens gnd

5.7L, Engine Performance Wiring Diagram (4 of 4) for Chrysler 300 SRT-8 2008

List of elements for 5.7L, Engine Performance Wiring Diagram (4 of 4) for Chrysler 300 SRT-8 2008:

• (below left "b" pillar) g300
• 2 rtn
• 2 sig
• 5v sply
• A/c clutch ctrl
• Accelerator pedal position sensor (at adjustable pedal assembly)
• Air conditioning system
• Anti-lock brakes
• App sens gnd 2
• App sig 1
• App sig 2
• Asd relay out
• Asd rly ctrl
• B15
• B16
• Brake sig 1
• Brake sig 2
• C13
• Can b bus (+)
• Can b bus (-)
• Ckp sig
• Cluster
• Cmp sig
• Computer data lines system
• Eot sig
• Esm sig
• Etc mtr (-)
• Evap prg ctrl
• Evap prg rtn
• Evap system monitor switch (at right rear of wheel well)
• Evaporator purge solenoid (at right of engine compt)
• F342
• F855
• Fuel pump module (on top of fuel tank)
• Fuel pump rly
• G224
• G300 (below left "b" pillar)
• G302 (on right front of cargo pan)
• Gnd
• Ground
• Iat sig
• K107
• K122
• K126
• K167
• K21
• K23
• K24
• K242
• K29
• K299
• K31
• K399
• K400
• K41
• K43
• K44
• K451
• K454
• K51
• K52
• K70
• K902
• K924
• Knock sensor 2 (on right rear of engine)
• Ks 2 rtn
• Ks 2 sig
• Mds 1 ctrl
• Mds 7 ctrl
• O2 1/1 sig
• O2 1/2 htr ctrl
• O2 2/1 sig
• O2 2/2 htr ctrl
• O2 rtn (up)
• Powertrain control module (at right rear of engine compt)
• S143 (in right front inner fender well, in breakout to c100)
• S309 (at left front body)
• Sens 1 sig
• Sens 2 sig
• Sens gnd 1
• Sens gnd 2
• Start rly ctrl
• Starting/ charging system
• Stop lamp switch (at base of brake pedal)
• System
• T752
• Tp 2 sig
• Z210
• Z912

6.1L

6.1L, Engine Performance Wiring Diagram (1 of 4) for Chrysler 300 SRT-8 2008

List of elements for 6.1L, Engine Performance Wiring Diagram (1 of 4) for Chrysler 300 SRT-8 2008:

• (at right side of engine compt) g102
• 87a
• A209
• A804
• Aat sig
• Ambient air temperature sensor (at right front of engine compt)
• Anti-lock brakes module (w/ esp) (at right front of engine compt)
• Asd relay out
• Bus (+)
• Bus (-)
• Can c bus (+)
• Can c bus (-)
• Coil 1 ctrl
• Coil 2 ctrl
• Coil 3 ctrl
• Coil 4 ctrl
• Coil 5 ctrl
• Coil 6 ctrl
• Coil 7 ctrl
• Coil 8 ctrl
• D64
• D65
• Ect sig
• Electronic
• Eop sig
• Etc mtr (+)
• F342
• F856
• F902
• F950
• Fuse 25a
• Fused b(+)
• G31
• G931
• Gen field ctrl
• Gen sns
• Ground
• Hot at all times
• Ign off- run- start
• Ign off-run- start
• Inj 1 ctrl
• Inj 2 ctrl
• Inj 3 ctrl
• Inj 4 ctrl
• Inj 5 ctrl
• Inj 6 ctrl
• Inj 7 ctrl
• Inj 8 ctrl
• K10
• K11
• K12
• K124
• K13
• K14
• K141
• K15
• K16
• K17
• K18
• K19
• K199
• K20
• K22
• K243
• K26
• K28
• K38
• K42
• K58
• K900
• K904
• K922
• K942
• K97
• K98
• K99
• Knock sensor 1 (at lower left rear of engine)
• Ks 1 rtn
• Ks 1 sig
• Map sig
• Nca
• O2 1/1 htr
• O2 1/2 sig
• O2 2/1 htr
• O2 2/2 sig
• O2 rtn (dn)
• Pnk
• Powertrain control module (at right rear of engine compt)
• Red
• Right front abs wheel speed sensor (w/ abs) (at right front wheel well)
• Right front wheel speed sensor (w/o abs) (at right front wheel well)
• Run/ start relay
• Run/start rly
• S122 (at right side of engine compt)
• S124 (at right side of engine compt)
• S167
• Sens gnd
• Sens sig
• Sens sply
• Sensor gnd
• Starting/ charging system
• Starting/charging system
• Totally integrated power module (at right side of engine compt)
• Tp sens gnd
• Tp sig 1
• Z904

6.1L, Engine Performance Wiring Diagram (2 of 4) for Chrysler 300 SRT-8 2008

List of elements for 6.1L, Engine Performance Wiring Diagram (2 of 4) for Chrysler 300 SRT-8 2008:

• (at rear of left engine head) ignition coil capacitor 1
• (fuel injector 1: at left side of intake manifold) (fuel injector 2: on top right rear of engine) (fuel injector 3: at left side of intake manifold) (fuel injector 4: at top right rear of engine) (fuel injector 5 & 7: at left side of intake manifold) (fuel injectors 6 : at top right rear of engine) (fuel injectors 8: on top right rear of engine)
• (ignition coil 1: on top right rear of engine) (ignition coil 2: on top right rear of engine) (ignition coil 3: on right rear of engine) (ignition coil 4: on top right rear of engine) (ignition coil 5: on right rear of engine) (ignition coil 7: on top right rear of engine) (ignition coils 6 & 8: on top right rear of engine)
• 5v sply
• 87a
• Auto shut down relay
• Etc mtr (+)
• Etc mtr (-)
• Fuel injectors
• Fuel pump relay
• Fuse 20a
• Fuse 25a
• Fuse 5a
• Hot at all times
• Hot in run or start
• Ignition coils
• Power distribution center (at right rear of trunk)
• Power distribution system
• Red
• S107 (at rear of engine)
• S108 (at right rear top of engine, next to ignition coil 8)
• S109 (at right rear of engine)
• S166
• Throttle body (at top of intake manifold)
• Totally integrated power module (at right side of engine compt)
• Tp sens gnd
• Tp sig 1
• Tp sig 2

6.1L, Engine Performance Wiring Diagram (3 of 4) for Chrysler 300 SRT-8 2008

List of elements for 6.1L, Engine Performance Wiring Diagram (3 of 4) for Chrysler 300 SRT-8 2008:

• (at left rear of engine compt)
• (at right rear of engine compt) s105
• 5v sply
• Camshaft position sensor
• Ckp sig
• Cmp sig
• Crankshaft position sensor (rear of engine, near flywheel) 5v sply
• Engine coolant temperature sensor (at left front of engine)
• G102 (at right of engine compt)
• G109 (at top of right cylinder head cover)
• Inlet air temperature sensor
• Manifold absolute pressure sensor (at top rear of intake sens gnd manifold)
• Map sig
• Oil pressure sensor (lower right front of engine)
• Oil temperature sensor (on right rear of engine)
• Oxygen sensor 1/1 (at left rear of engine)
• Oxygen sensor 1/2 (at left rear of engine)
• Oxygen sensor 2/1 (at right side of engine)
• Oxygen sensor 2/2 (at lower rear of engine)
• S106 (at right rear of engine compt)
• S110 (at right rear of engine compt)
• S112 (at right rear of engine compt)
• S125
• Sens gnd

6.1L, Engine Performance Wiring Diagram (4 of 4) for Chrysler 300 SRT-8 2008

List of elements for 6.1L, Engine Performance Wiring Diagram (4 of 4) for Chrysler 300 SRT-8 2008:

• 5v sply
• A/c clutch ctrl
• Accelerator pedal position sensor (at adjustable pedal assembly)
• Air conditioning system
• Anti-lock brakes system
• App sens gnd 1
• App sens gnd 2
• App sig 1
• App sig 2
• Asd relay ctrl
• Asd relay out
• B15
• B16
• Brake sig 1
• Brake sig 2
• C13
• Can b bus (+)
• Can b bus (-)
• Ckp sig
• Cluster
• Cmp sig
• Computer data lines system
• Eot sig
• Esm sig
• Etc mtr (-)
• Evap prg ctrl
• Evap prg rtn
• Evap system monitor switch (at right rear of wheel well)
• Evaporator purge solenoid (at right of engine compt)
• F342
• F855
• Fuel pump module (on top of fuel tank)
• Fuel pump rly
• G224
• G300 (below left "b" pillar)
• G302 (on right front of cargo pan)
• Ground
• Iat sig
• K107
• K122
• K126
• K167
• K21
• K23
• K24
• K242
• K29
• K299
• K31
• K399
• K400
• K41
• K43
• K44
• K51
• K52
• K70
• K902
• K924
• Knock sensor 2 (at lower right rear of engine)
• Ks 2 rtn
• Ks 2 sig
• O2 1/1 sig
• O2 1/2 htr ctrl
• O2 2/1 sig
• O2 2/2 htr ctrl
• O2 rtn (up)
• Powertrain control module (at right rear of engine compt)
• S143 (in right front inner fender well)
• S309 (at left front body)
• Sens 1 sig
• Sens 2 sig
• Sens gnd 1
• Sens gnd 2
• Start rly ctrl
• Starting/ charging system
• Stop lamp switch (at base of brake pedal)
• T752
• Tp sig 2
• Z210
• Z912