GROUND DISTRIBUTION – Ford Ranger 2008 – SYSTEM WIRING DIAGRAMS

GROUND DISTRIBUTION

Ground Distribution Wiring Diagram (1 of 2) for Ford Ranger 2008

List of elements for Ground Distribution Wiring Diagram (1 of 2) for Ford Ranger 2008:

• (2.3l) engine cooling fan motor
• (4x4 w/ automatic transmission) digital transmission range (dtr) sensor
• (left rear side of engine compt) battery junction box (bjb)
• (not used)
• (stx) left rear park/stop lamp
• (stx) left rear turn lamp
• (stx) right rear park/stop lamp
• (stx) right rear turn lamp
• A/c clutch field coil
• Anti-lock brake system (abs) module
• Battery
• Blower motor relay
• Brake fluid level switch
• C175b
• C294c
• Climate control assembly
• Driver side door lock switch
• Exterior rear view mirror switch
• Front heated blower motor resistor
• Fuel tank unit
• Fuel tank unit)
• G100 (left front of engine compt)
• G101 (left rear of engine)
• G102 (left side of engine compt)
• G103 (left side of engine compt)
• G105 (right rear of engine compt)
• G106 (top rear of engine compt)
• G107 (right rear of engine compt)
• G200 (left kick panel)
• Horn
• Left front door ajar switch
• Left front fog lamp
• Left front park/turn lamp
• Left front side lamp
• Left headlamp
• Left license plate lamp
• Left rear park/stop/ turn lamp
• Left reversing lamp
• Mass air flow/ intake air temperature (maf/iat) sensor
• Master window adjust switch
• Nca
• Parking brake switch
• Pcm power relay
• Powertrain control module (pcm)
• Right front fog lamp
• Right front park/turn lamp
• Right front side lamp
• Right headlamp
• Right license plate lamp
• Right rear park/stop/ turn lamp
• Right reversing lamp
• S116 (in dash panel to headlight junction harness, near breakout to battery junction box)
• S117 (in dash panel to headlight junction harness, near breakout to battery junction box)
• S122 (in dash panel to headlight junction harness, near breakout to c139)
• S401 (in rear light connector harness, near breakout to c421)
• Shield
• Speed control servo
• Trailer tow connector
• W/ power equipment
• Windshield washer pump motor
• Windshield wiper motor

Ground Distribution Wiring Diagram (2 of 2) for Ford Ranger 2008

List of elements for Ground Distribution Wiring Diagram (2 of 2) for Ford Ranger 2008:

• (right kick panel) smart junction box (sjb)
• (w/ power equipment) passenger side door lock switch
• 4x4 control module
• Audio unit
• Blend door actuator
• Brake pedal position switch
• Brake shift interlock
• C202a
• C217b
• C218c
• C220a
• C220b
• C2280b
• C2280c
• C281b
• C290a
• C294b
• C2982a
• Climate control assembly
• Clock- spring
• Clutch pedal position switch
• Data link connector (dlc)
• Door lock/unlock relay
• Driver door unlock relay
• Driver safety belt buckle switch
• Driver seat position sensor
• Driver side rear door ajar switch
• Four- wheel drive switch
• Four-door model
• Front cigar lighter
• Fuel tank unit
• G202 (right kick panel)
• G204 (under front of center console)
• G205
• G301 (under driver's seat)
• High mounted stoplamp
• Horn switch
• Illumination dimmer
• Indicator flasher relay
• Instrument cluster
• Low current board
• Main light switch
• Multifunction switch
• Occupant classification system (ocs) module
• Passenger safety belt buckle switch
• Passenger side rear door ajar switch
• Passive anti-theft transceiver
• Power point
• Right front door ajar switch
• S203 (in main harness, near breakout to deactivator switch)
• S214 (in main harness, near breakout to clockspring)
• S220 (in main harness, near breakout to front cigar lighter)
• S302 (in interior lights harness, at breakout to c327)
• S600 (in right front door window regulator harness, near breakout to passenger side front power window motor)
• Satellite radio receiver
• Speed control on/off switch
• Speed control set/resume switch
• Subwoofer amplifier
• Windshield wiper motor