GROUND DISTRIBUTION – Ford Ranger Splash 1996 – SYSTEM WIRING DIAGRAMS

GROUND DISTRIBUTION

Ground Distribution Wiring Diagram (1 of 2) for Ford Ranger Splash 1996

List of elements for Ground Distribution Wiring Diagram (1 of 2) for Ford Ranger Splash 1996:

• (2.3l)
• (3.0l/4.0l only) camshaft position (cmp) sensor
• (3.0l/4.0l)
• 3.0l/4.0l only
• 4 wheel anti-lock brake system (4wabs) hydraulic unit
• 4 wheel anti-lock brake system (4wabs) main relay
• 4 wheel anti-lock brake system (4wabs) module
• 4wd mode switch
• A/c clutch diode
• A/c clutch field coil
• Air bag diagnostic monitor
• All lock relay
• All unlock relay
• Auxiliary power socket
• Battery
• Blend door actuator
• Brake fluid level switch
• C214
• C215
• C216
• C221
• C224
• C228
• C233
• C234
• C235
• C236
• C250
• C251
• C410
• Cigar lighter
• Clock- spring assembly
• Data link connector (dlc)
• Electric shift control module
• Engine air cleaner assembly
• Engine compartment fuse/relay box
• Engine compartment lamp
• Flasher
• Fog lamp switch
• Fuel pump module
• G100 (lower left front of engine compartment, on frame rail)
• G100 (lower left front of engine compartment)
• G104 (top center of left fender apron)
• G108 (left side of upper radiator support)
• G114 (left rear of engine)
• G120 (right side of engine)
• Generic electronic module (gem)/ central timer module (ctm)
• Gnd
• Heater or a/c- heater control assembly
• Ignition switch
• Ignition tamper switch
• Instrument cluster
• Instrument illumination dimmimg module
• Left fog lamp
• Left front park/turn lamp
• Left headlamp
• Main light switch
• Mass air flow (maf) sensor
• Passive de- activation (pad) module
• Pcm power relay
• Power window relay
• Powertrain control module (pcm)
• Purge flow (pf) sensor
• Radio
• Rear anti-lock brake system (rabs) module
• Rear anti-lock brake system (rabs) proportioning valve switch assembly
• Relay box #1
• Relay box #3
• Remote anti-theft personality (rap) module
• Right door ajar switch
• Right door disarm switch
• Right door lock switch
• Right illuminated entry switch
• Shift lock actuator
• Speed control servo/ amplifier assembly
• Vehicle speed sensor (vss)
• W/ 4wabs
• W/o 4wabs
• Windshield wiper motor

Ground Distribution Wiring Diagram (2 of 2) for Ford Ranger Splash 1996

List of elements for Ground Distribution Wiring Diagram (2 of 2) for Ford Ranger Splash 1996:

• Amplifier
• Anti-theft hood switch
• C223
• Camshaft position sensor (cmp) shield
• Cd changer
• Crankshaft position sensor (ckp) shield
• Fuel pump module
• G105 (right side of engine compartment, on upper fender apron)
• G123 (right side of safety wall)
• G200 (behind left cowl panel)
• G203 (behind right cowl panel)
• Generic electronic module (gem)/central timer module (ctm)
• Left backup lamp
• Left door ajar switch
• Left door disarm switch
• Left door lock switch
• Left illuminated entry switch
• Left license lamp
• Left power bolster lumbar motor
• Left rear park/stop lamp
• Left rear turn lamp
• Left seat control switch
• M/t only
• Master window control switch
• Outside cargo/high mount stop lamp
• Power mirror switch
• Powertrain control module (pcm)
• Radio
• Right backup lamp
• Right fog lamp
• Right front park/turn lamp
• Right headlamp
• Right license lamp
• Right power lumbar motor
• Right rear park/stop lamp
• Right rear turn lamp
• Seat belt switch
• Transmission range (tr) sensor
• Windshield washer pump