Wiring Diagram - REVERSING LIGHTS - Fiat DUCATO 2.8 JTD 8V fino a 02/05
Components - REVERSING LIGHTS - Fiat DUCATO 2.8 JTD 8V fino a 02/05
| Component code | Description | Reference to the assembly |
| B002 | JUNCTION UNIT UNDER DASHBOARD | - |
| C030 | LEFT REAR EARTH | - |
| C031 | RIGHT REAR EARTH | - |
| C080 | RIGHT REAR LIGHT CLUSTER EARTH | - |
| D001 | FRONT/DASHBOARD COUPLING | - |
| D025 | DASHBOARD/LEFT REAR COUPLING | - |
| D026 | DASHBOARD/RIGHT REAR COUPLING | - |
| D097 | SHORT CIRCUITING COUPLING | - |
| D187 | FRONT/REVERSING SWITCH BRIDGE COUPLING | - |
| F030 | LEFT REAR LIGHT CLUSTER | |
| F031 | RIGHT REAR LIGHT CLUSTER | |
| I020 | REVERSING LIGHTS SWITCH | - |
| I081 | MULTIFUNCTION SWITCH ON GEARBOX | - |
| - | ||
| - | ||
| - | ||
| - | ||
| - | ||
| - | ||
| - |
Location Components - REVERSING LIGHTS - Fiat DUCATO 2.8 JTD 8V fino a 02/05
Components - REVERSING LIGHTS - Fiat DUCATO 2.8 JTD 8V fino a 02/05
| Component code | Description | Reference to the assembly |
| B002 | JUNCTION UNIT UNDER DASHBOARD | - |
| C030 | LEFT REAR EARTH | - |
| C031 | RIGHT REAR EARTH | - |
| C080 | RIGHT REAR LIGHT CLUSTER EARTH | - |
| D001 | FRONT/DASHBOARD COUPLING | - |
| D025 | DASHBOARD/LEFT REAR COUPLING | - |
| D026 | DASHBOARD/RIGHT REAR COUPLING | - |
| D097 | SHORT CIRCUITING COUPLING | - |
| D187 | FRONT/REVERSING SWITCH BRIDGE COUPLING | - |
| F030 | LEFT REAR LIGHT CLUSTER | |
| F031 | RIGHT REAR LIGHT CLUSTER | |
| I020 | REVERSING LIGHTS SWITCH | - |
| I081 | MULTIFUNCTION SWITCH ON GEARBOX | - |
| - | ||
| - | ||
| - | ||
| - | ||
| - | ||
| - | ||
| - |
Description - REVERSING LIGHTS - Fiat DUCATO 2.8 JTD 8V fino a 02/05
The vehicle is equipped with a reversing light located in the right tail-light cluster.This is operated whenever reverse is engaged via a switch on the outside of the gear housing.The circuit is supplied with the key on MAR and protected by a fuse located in the underfacia junction unit.
Operational Description - REVERSING LIGHTS - Fiat DUCATO 2.8 JTD 8V fino a 02/05
The reversing light activation signal leaves switch I020, located in gear casing, ignition-operated (INT/A) via a connection between ignition switch H001 and pin 48 connector C of under-facia junction unit B002. Power is supplied to short-circuit junction D097D - pin 1- via fuse F31 housed in the junction unit. The short-circuit joint supplies, in turn, reversing light switch I020 from pin 5.When reverse is engaged, switch I020 closes - across pin 1 and pin 2 - and sends a signal to short-circuit junction D097D, pin 7, that governs activation of the bulb housed in tail-light F031.A signal also comes from parking sensor control unit (see function E3090).
