Alfa Romeo 159 1.9 JTD 16V Fino a 12/05 – ELECTRIC FRONT WINDOWS – – Right hand drive – WIRING DIAGRAM, LOCATION COMPONENTS, OPERATIONAL DESCRIPTION – WIRING DIAGRAM, LOCATION COMPONENTS, OPERATIONAL DESCRIPTION

WIRING DIAGRAM - ELECTRIC FRONT WINDOWS - Alfa Romeo 159 1.9 JTD 16V Fino a 12/05

FRONT ELECTRIC WINDOWS - WIRING DIAGRAM Alfa Romeo 159 1.9 JTD 16V Fino a 12/05

COMPONENTS - ELECTRIC FRONT WINDOWS - Alfa Romeo 159 1.9 JTD 16V Fino a 12/05

Component code	Description	Reference to the operation
B001	JUNCTION UNIT
B002	JUNCTION UNIT UNDER DASHBOARD
B099	MAXIFUSE BOX ON BATTERY
C015	DASHBOARD EARTH, DRIVER'S SIDE	-
C020	PASSENGER SIDE DASHBOARD EARTH	-
C031	RIGHT REAR EARTH	-
D030	DRIVER'S FRONT DOOR COUPLING	-
D031	PASSENGER FRONT DOOR COUPLING	-
E050	INSTRUMENT PANEL
H044	ELECTRIC WINDOW CONTROLS ON FRONT DRIVER'S DOOR
H050	ELECTRIC WINDOW SWITCH ON FRONT PASSENGER'S DOOR
K022	ANTI-CRUSH SAFETY SENSOR IN DRIVER'S FRONT DOOR	-
K023	ANTI-CRUSH SAFETY SENSOR IN PASSENGER FRONT DOOR	-
M001	BODY COMPUTER
M066	DRIVER'S DOOR CONTROL UNIT (NPG)
M067	PASSENGER DOOR CONTROL UNIT (NPP)
M089	STEERING LOCK CONTROL UNIT (NBS)
N060	DRIVER'S FRONT ELECTRIC WINDOW MOTOR
N061	RIGHT FRONT ELECTRIC WINDOW MOTOR

COMPONENT LOCATION - ELECTRIC FRONT WINDOWS - Alfa Romeo 159 1.9 JTD 16V Fino a 12/05

FRONT ELECTRIC WINDOWS - COMPONENT LOCATION Alfa Romeo 159 1.9 JTD 16V Fino a 12/05

קבל גישה לכל מכוניות דיאגרמות החיווט

Component code	Description	Reference to the operation
B001	JUNCTION UNIT
B002	JUNCTION UNIT UNDER DASHBOARD
B099	MAXIFUSE BOX ON BATTERY
C015	DASHBOARD EARTH, DRIVER'S SIDE	-
C020	PASSENGER SIDE DASHBOARD EARTH	-
C031	RIGHT REAR EARTH	-
D030	DRIVER'S FRONT DOOR COUPLING	-
D031	PASSENGER FRONT DOOR COUPLING	-
E050	INSTRUMENT PANEL
H044	ELECTRIC WINDOW CONTROLS ON FRONT DRIVER'S DOOR
H050	ELECTRIC WINDOW SWITCH ON FRONT PASSENGER'S DOOR
K022	ANTI-CRUSH SAFETY SENSOR IN DRIVER'S FRONT DOOR	-
K023	ANTI-CRUSH SAFETY SENSOR IN PASSENGER FRONT DOOR	-
M001	BODY COMPUTER
M066	DRIVER'S DOOR CONTROL UNIT (NPG)
M067	PASSENGER DOOR CONTROL UNIT (NPP)
M089	STEERING LOCK CONTROL UNIT (NBS)
N060	DRIVER'S FRONT ELECTRIC WINDOW MOTOR
N061	RIGHT FRONT ELECTRIC WINDOW MOTOR

DESCRIPTION - ELECTRIC FRONT WINDOWS - Alfa Romeo 159 1.9 JTD 16V Fino a 12/05

The electric windows for the front doors are operated through the switches on the driver''s door (both windows) and the passenger side (passenger side only).The control units in the door control the operation of the driver''s and passenger side electric window motors which are operated both manually and automatically depending on the version.Automatic operation takes place as follows:- if the button is pressed is between 60 and 300 milliseconds, operation is manual. the glass goes up/down only with the key pressed;- f the key is pressed for longer than 300 milliseconds, operation is automatic: even if the button is released, the glass continues to move up/down until the end of travel position is reached or until the intervention of the anti-crush safety system (if fitted);- pressing the button again whilst the window is moving stops it in the position it is in;- if the button is pressed for less than 60 milliseconds, this is ignored (it is treated as an accidental knock).Each control unit in the door also manages the anti-crush safety function: it acquires information concerning the possible presence of an obstacle whilst the glass is closing (upwards movement): a resistive sensor is inserted in an outer casing fitted to the upper seal which is compressed if there is an obstacle preventing the window from closing properly: under these circumstances the control unit immediately interrupts the travel of the glass and reverses it until it is in the bottom end of travel position. The correct operation of the anti-crush sensor is controlled by the control unit check function: in the case of a failure this information is sent via the CAN to the instrument panel to show the information on the display.In addition, if a fault is detected, the control unit inhibits the automatic raising operation only allowing it in steps of 500 ms each time the button is pressed.The windows are automatically opened or closed through the special prolonged (more than 2 seconds) command sent by the TEG remote control button.The circuit is controlled by the services relay and protected by two fuses located in the junction unit under the dashboard: there is a power supply both with the TEG inserted (ON) and not inserted (OFF); during the starting stage this relay is temporarily deactivated whilst with the TEG not inserted (OFF) the Body Computer keeps the relay activated for 3 minutes but deactivates it 30 seconds after one of the doors is opened.The driver''s door control unit acquires both the driver''s front door and passenger side front door commands; it manages the movement of the driver''s window directly and sends the relevant movement commands for the passenger side window via the CAN to the passenger door control unit which manages the passenger side window directly.

FUNCTIONAL DESCRIPTION - ELECTRIC FRONT WINDOWS - Alfa Romeo 159 1.9 JTD 16V Fino a 12/05

The services relay T13, located in the junction unit under the dashboard B2, supplies pin 14 of connector F, the two control units for the driver''s door M66 and the passenger door M67, pin 8 of connector D, through the control logic described above and controlled by the Body Computer M1, via two lines protected by fuses F47 and F48. Pins 19 of connector B and 7 of connector D of M66 and M67 are earthed. Control units M66 and M67 are connected via the CAN line to one another and to the Body Computer M1.Unit H44 contains the driver and passenger side window controls:: dedicated analogue signals are sent to pins 31 and 32 of connector A of M66 (pin 33 supplies a reference earth).. Similarly, the control at the passenger front door H50 sends a special analogue signal to the control unit M67 pin 32 (pin 33 provides the reference earth).Control unit M66 operates the motor N60 (driver''s side) directly - pins 9 and 10 of connector D - and via control unit M67 - pins 9 and 19 of connector D - motor N61 (passenger side).Pins 2 and 5 of connector C of M66 and M67 also receive signals from the anti-crush safety sensors K22 and K23 .The two control units are connected to the instrument panel E50 via the CAN line to manage the signal if there is a failure in the anti-crush safety sensors.