Isuzu Hombre S 1998 - 1998 ELECTRICAL Fuses & Circuit Breakers - Hombre

Isuzu Hombre S 1998 - CAUTIONS & WARNINGS SUPPLEMENTAL RESTRAINT SYSTEM (AIR BAG)

WARNING:

To avoid injury from accidental air bag deployment, read and carefully follow all warnings and service precautions. See AIR BAG RESTRAINT SYSTEM article under RESTRAINTS.

Modifications or improper maintenance, including incorrect removal and installation of the Supplemental Restraint System (SRS), can adversely affect system performance. DO NOT cover, obstruct or change the steering wheel horn pad in any way, as such action could cause improper function of the system. Use only plain water when cleaning the horn pad. Solvents or cleaners could adversely affect the air bag cover and cause improper deployment of the system.

CAUTION:

Disconnect negative battery cable before servicing any air bag system, steering column or passenger side dash component. After any repair, turn ignition key to the ON position from passenger's side of vehicle in case of accidental air bag inflation

Isuzu Hombre S 1998 - BATTERY WARNING

WARNING:

When battery is disconnected, vehicles equipped with computers may lose memory data. When battery power is restored, driveability problems may exist on some vehicles. These vehicles may require a relearn procedure. See COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION section.

Isuzu Hombre S 1998 - ELECTROSTATIC DISCHARGE SENSITIVE (ESD) PARTS

WARNING:

Many solid state electrical components can be damaged by static electricity (ESD). Some will display a warning label, but many will not. Discharge personal static electricity by touching a metal ground point on the vehicle prior to servicing any ESD sensitive component.

Isuzu Hombre S 1998 - REPLACING BLOWN FUSES

Before replacing a blown fuse, remove ignition key, turn off all lights and accessories to avoid damaging the electrical system. Be sure to use fuse with the correct indicated amperage rating. The use of an incorrect amperage rating fuse may result in a dangerous electrical system overload.

Isuzu Hombre S 1998 - IDENTIFICATION UNDERHOOD BUSSED ELECTRICAL CENTER

See Fig. 1 -Fig. 8 for fuse and relay layout and identification.

Fig. 1: Isuzu Hombre S 1998 - Component Locations - Identifying Underhood Bussed Electrical Center (Base Model)

Fig. 2: Isuzu Hombre S 1998 - Component Locations - Identifying Underhood Bussed Electrical Center Legend (1 of 3) (Base Model)

Fig. 3: Isuzu Hombre S 1998 - Component Locations - Identifying Underhood Bussed Electrical Center Legend (2 of 3) (Base Model)

Fig. 4: Isuzu Hombre S 1998 - Component Locations - Identifying Underhood Bussed Electrical Center Legend (3 of 3) (Base Model)

Fig. 5: Isuzu Hombre S 1998 - Component Locations - Identifying Underhood Bussed Electrical Center (Up-Level Pickup)

Fig. 6: Isuzu Hombre S 1998 - Component Locations - Identifying Underhoood Bussed Electrical Center Legend - Up-Level Pickup (1 of 3)

Fig. 7: Isuzu Hombre S 1998 - Component Locations - Identifying Underhood Bussed Electrical Center Legend - Up-Level Pickup (2 of 3)

Fig. 8: Isuzu Hombre S 1998 - Component Locations - Identifying Underhood Bussed Electrical Center Legend - Up-Level Pickup (3 of 3)

Isuzu Hombre S 1998 - INSTRUMENT PANEL FUSE BLOCK

See Fig. 9 and Fig. 10 for fuse and relay layout and identification.

Fig. 9: Isuzu Hombre S 1998 - Component Locations - Instrument Panel Fuse Block

Fig. 10: Isuzu Hombre S 1998 - Component Locations - Instrument Panel Fuse Block Legend