WARNING SYSTEMS – Chevrolet Monte Carlo SS 2004 – SYSTEM WIRING DIAGRAMS

WARNING SYSTEMS

Warning Systems Wiring Diagram for Chevrolet Monte Carlo SS 2004

List of elements for Warning Systems Wiring Diagram for Chevrolet Monte Carlo SS 2004:

• A10
• A12
• A15
• Accessory voltage
• Ajar
• Battery
• Bcm fuse 10a
• Body control module (behind left side of dash, above parking brake lever)
• Class 2 serial data
• Closed
• Clstr/ bcm fuse 10a
• Data link connector (dlc) (below left side of dash, right of steering column)
• Door open switch- driver
• Dr lk fuse 20a
• Driver door lock
• Driver door lock switch
• Driver door open sw sig
• G201 (under dash, to right of steering column)
• G203 (under dash, to right of steering column)
• G301 (below driver door opening, rear of left "a" pillar)
• Ground
• Head
• Headlamp switch
• Headlamp switch signal
• Hot at all times
• Hot in acc or on
• Hot in acc, on or start
• Hot in on or start
• Ignition 0 voltage
• Ignition 1 voltage
• Ignition key alarm switch (closed w/key in ignition switch)
• Ignition switch (left side of dash)
• Inflatable restraint sensing & diagnostic module (sdm) (below passenger's seat)
• Instrument panel cluster (ipc)
• Key in ignition switch sig
• Left i/p junction block (left side of dash, behind access panel)
• Left seat belt switch
• Left seat belt switch (right side of driver's seat)
• Lh htd st/bcm fuse 15a
• Logic
• Low tire pressure door ajar
• Message center
• Nca
• Off
• Open
• Park
• Park brake switch (at base of parking brake assembly)
• Park lamp switch
• Park lamp switch signal
• Pcm/bcm clstr fuse 10a
• Pnk
• Power distribution system
• Radio
• S236
• S253
• S322
• S330 (w/ 6 way driver seat)
• Seat belt ind
• Serial data
• Sp205 (left side of dash)
• Stop fuse 10a