Fiat ULYSSE 2.2 16V JTD fino a 04/03 – RADIO – – MY 2005 – WIRING DIAGRAM, LOCATION COMPONENTS, OPERATIONAL DESCRIPTION – WIRING DIAGRAM, LOCATION COMPONENTS, OPERATIONAL DESCRIPTION

RADIO - WIRING DIAGRAM Fiat ULYSSE 2.2 16V JTD fino a 04/03

Components - RADIO - Fiat ULYSSE 2.2 16V JTD fino a 04/03

Component code	Description	Reference to the assembly
B001	ENGINE COMPARTMENT JUNCTION UNIT
C015	DRIVER''S DASHBOARD EARTH	-
C020	PASSENGER SIDE DASHBOARD EARTH	-
C022	Centre dashboard earth	-
D006	FRONT/REAR COUPLING	-
D020	DASHBOARD/REAR COUPLING	-
D030	DRIVER''S FRONT DOOR COUPLING	-
D031	PASSENGER FRONT DOOR COUPLING	-
E050	INSTRUMENT PANEL
H001	Ignition switch
M001	BODY COMPUTER
M093	STEERING WHEEL NODE CONTROL UNIT (NVO)
M140	WARNING LIGHTS AND MILOMETER CONTROL UNIT (NSO)	-
M172	MULTIFUNCTION SCREEN NODE	-
P020	RADIO	-
P025	AERIAL FEED/AMPLIFIER	-
P035	SPEAKER IN LEFT FRONT DOOR
P036	SPEAKER IN RIGHT FRONT DOOR
P045	LEFT FRONT TWEETER SPEAKER
P046	RIGHT FRONT TWEETER SPEAKER
P047	LEFT REAR TWEETER SPEAKER
P048	RIGHT REAR TWEETER SPEAKER
P075	CD CHANGER MODULE	-
P120	LEAF REAR SPEAKER IN SIDE PANEL	-
P121	RIGHT REAR SPEAKER IN SIDE PANEL	-

RADIO - COMPONENT LOCATION Fiat ULYSSE 2.2 16V JTD fino a 04/03

すべての配線図にアクセスする車

Component code	Description	Reference to the assembly
B001	ENGINE COMPARTMENT JUNCTION UNIT
C015	DRIVER''S DASHBOARD EARTH	-
C020	PASSENGER SIDE DASHBOARD EARTH	-
C022	Centre dashboard earth	-
D006	FRONT/REAR COUPLING	-
D020	DASHBOARD/REAR COUPLING	-
D030	DRIVER''S FRONT DOOR COUPLING	-
D031	PASSENGER FRONT DOOR COUPLING	-
E050	INSTRUMENT PANEL
H001	Ignition switch
M001	BODY COMPUTER
M093	STEERING WHEEL NODE CONTROL UNIT (NVO)
M140	WARNING LIGHTS AND MILOMETER CONTROL UNIT (NSO)	-
M172	MULTIFUNCTION SCREEN NODE	-
P020	RADIO	-
P025	AERIAL FEED/AMPLIFIER	-
P035	SPEAKER IN LEFT FRONT DOOR
P036	SPEAKER IN RIGHT FRONT DOOR
P045	LEFT FRONT TWEETER SPEAKER
P046	RIGHT FRONT TWEETER SPEAKER
P047	LEFT REAR TWEETER SPEAKER
P048	RIGHT REAR TWEETER SPEAKER
P075	CD CHANGER MODULE	-
P120	LEAF REAR SPEAKER IN SIDE PANEL	-
P121	RIGHT REAR SPEAKER IN SIDE PANEL	-

The vehicle is wired for the installation of a radio system.This preparation includes:- radio supply leads;- front power speakers and separate tweeters;- rear power speakers and separate tweeters;- cables connecting the radio with the speakers;- an aerial at the back mounted on the roof and connected by means of a coaxial cable to the radio.The radio circuit is supplied both with the key in position M and it receives a direct supply from the battery (which allows tuning, safety codes, etc. to be programmed).The main radio controls are duplicated on the steering wheel allowing the driver to operate the radio without taking their hands off the steering wheel.To all intents the radio is a CAN node and is connected to the body computer, the instrument panel and the multifuction screen where information relating to the radio is displayed.A special CD cartridge allows up to 6 CDs to be loaded which are then selected through the radio controls. The CD changer is located in the dashboard console.The following is also available, depending on the trim level:- RADIO with CD player, described in this section;- CONNECT Nav" device (with navigator with pictograms);- CONNECT Nav +" device (with navigator with maps).All the details on the specifications and the operation of the various models are contained in the "OWNER''S HANDBOOK".

Multifunction screen node M172 (pin 1) receives a power supply from body computer node M001 (pin 1 connector D).Instrument panel control unit E050 (pin 13) and odometer warning light control unit M140 (pin 4) receives a power supply from M001 (pin 6 connector D) but with a line protected from fuse F14.Radio P020:- is interfaced (pins 10 and 13 connector A), via the CAN line, with warning light and odometer control unit node M140 (pins 2 and 5), control panel E050 (pins 6 and 12), body computer node M001 (pins 8 and D) and multifunction screen node M172 (pins 7 and 9);- it is connected (pins 7, 2, 1, 3, 8, 10, 4 connector C) to CD loader P075 (pins 1, 7, 3, 9, 10, 6, 5 respectively);- it receives power supply (pin 12 connector A) from body computer node M001 (pin 1 connector D).The Connect radio P020 is connected, via connector B, to the various speakers located inside the vehicle:- from pins 1, 5 it is connected to the speakers P048 (right rear tweeter) and P121 (right rear speaker);- it is connected, from pins 2, 6, to the speakers P036 (speaker in right front door) and P046 (right front tweeter);- it is connected, from pins 3, 7, to the speakers P035 (speaker in left front door) and P045 (left front tweeter);- from pins 4, 8 it is connected to the speakers P047 (left rear tweeter) and P120 (left rear speaker on side panel);The steering wheel node control unit m093 receives a power supply (pin 5 connector A and pin 4 connector D) from the Body computer node M001 (pin 11 connector B and pin 1 connector G respectively) via two lines only the second of which is protected by fuse F04.Some radio functions may be controlled by radio controls on the steering wheel: from the steering wheel node control unit M093 (pins 1 and 3 of connector A), it is forwarded to the Body computer node M001 (pins 5 and 3 of connector G respectively). The signal travels via the CAN line.