

WIRING DIAGRAM - REVERSING LIGHTS - Alfa Romeo 159 2.4 JTD 20V Fino a 12/05
COMPONENTS - REVERSING LIGHTS - Alfa Romeo 159 2.4 JTD 20V Fino a 12/05
B002 | JUNCTION UNIT UNDER DASHBOARD | |
B099 | MAXIFUSE BOX ON BATTERY | |
C020 | PASSENGER SIDE DASHBOARD EARTH | - |
C030 | LEFT REAR EARTH | - |
D040 | REAR/BOOT COUPLING | - |
D085 | REAR/TAILGATE COUPLING | - |
F035 | LEFT REAR LIGHT CLUSTER (MOVING SECTION ON BOOT LID) | |
I020 | REVERSING LIGHTS SWITCH | |
M001 | BODY COMPUTER | |
M089 | STEERING LOCK CONTROL UNIT (NBS) |
COMPONENT LOCATION - REVERSING LIGHTS - Alfa Romeo 159 2.4 JTD 20V Fino a 12/05
B002 | JUNCTION UNIT UNDER DASHBOARD | |
B099 | MAXIFUSE BOX ON BATTERY | |
C020 | PASSENGER SIDE DASHBOARD EARTH | - |
C030 | LEFT REAR EARTH | - |
D040 | REAR/BOOT COUPLING | - |
D085 | REAR/TAILGATE COUPLING | - |
F035 | LEFT REAR LIGHT CLUSTER (MOVING SECTION ON BOOT LID) | |
I020 | REVERSING LIGHTS SWITCH | |
M001 | BODY COMPUTER | |
M089 | STEERING LOCK CONTROL UNIT (NBS) |
DESCRIPTION - REVERSING LIGHTS - Alfa Romeo 159 2.4 JTD 20V Fino a 12/05
The vehicle is equipped with a white reversing light located in the left rear light cluster on the moving part of the boot lid.It is activated each time reverse gear is engaged: this information arrives via the special switch located on the outside of the gearbox casing. The reversing lights circuit is supplied with the TEG inserted (INT) and protected by a special fuse in the junction unit under the dashboard.The signal that reverse gear has been engaged is managed by the Body Computer which forwards this information to the steering column switch unit for the automatic operation of the rearscreen wiper and, via the CAN, to the other nodes, for example to the parking sensors control unit.
FUNCTIONAL DESCRIPTION - REVERSING LIGHTS - Alfa Romeo 159 2.4 JTD 20V Fino a 12/05
The switch for the reversing lights I20 receives a supply controlled by the ignition (INT) from the fuse line F35 of the junction unit under the dashboard B2.When reverse gear is engaged, the switch closes and sends a power supply to the reversing light in the left rear light cluster (moving section) F35, directly via the junction unit B2 from pin 7 of connector D.The activation signal for the reversing light is also sent to the Body Computer M1 - pin 3 of connector F - and from there to the steering column switch unit H5, for the automatic engagement of the rearscreen wiper.