Fiat DOBLO 1.2 8v Da 10/2000 – FOG LIGHTS – – WIRING DIAGRAM, LOCATION COMPONENTS, OPERATIONAL DESCRIPTION – WIRING DIAGRAM, LOCATION COMPONENTS, OPERATIONAL DESCRIPTION

Wiring diagram - FOG LIGHTS - Fiat DOBLO 1.2 8v Da 10/2000

FOG LIGHTS - WIRING DIAGRAM Fiat DOBLO 1.2 8v Da 10/2000

COMPONENTS - FOG LIGHTS - Fiat DOBLO 1.2 8v Da 10/2000

Component code	Name	Assembly reference
B1	Engine compartment junction unit	-
B1	Engine compartment junction unit
B1	Engine compartment junction unit
B2	Junction unit under dashboard
C10	Front left earth	-
C15	Facia earth, driver''s side	-
E50	Instrument panel	-
E50	Instrument panel
F10	Left headlamp
F11	Right headlamp
H90	Switch control unit
M1	Body computer

Location of components - FOG LIGHTS - Fiat DOBLO 1.2 8v Da 10/2000

FOG LIGHTS - LOCATION OF COMPONENTS Fiat DOBLO 1.2 8v Da 10/2000

모든 배선 다이어그램에 액세스하십시오.

COMPONENTS - FOG LIGHTS - Fiat DOBLO 1.2 8v Da 10/2000

Component code	Name	Assembly reference
B1	Engine compartment junction unit	-
B1	Engine compartment junction unit
B1	Engine compartment junction unit
B2	Junction unit under dashboard
C10	Front left earth	-
C15	Facia earth, driver''s side	-
E50	Instrument panel	-
E50	Instrument panel
F10	Left headlamp
F11	Right headlamp
H90	Switch control unit
M1	Body computer

Description - FOG LIGHTS - Fiat DOBLO 1.2 8v Da 10/2000

The vehicle has two additional fog lamps for use in poor visibility conditions. The fog lights are activated through a special button on the switch unit in the middle of the facia.The fog lights circuit is protected by a special fuse and controlled by a relay, both located in the junction unit in the engine compartment.The fog lights only come on when the side lights are switched on.In addition, if the key is turned ot the OFF position or the side lights are switched off, the fog lights are switched off even if the button is pressed.A warning light in the instrument panel signals that the fog lights have been switched on.

Functional description - FOG LIGHTS - Fiat DOBLO 1.2 8v Da 10/2000

The activation signal for the fog lights consists of an earth signal coming from the switch unit H90 and entering at pin 20 of connector E of the body computer M01 . If there is a side lights signal, H90 receives a supply to light up the panel via a line protected by fuse F49 of the junction unit under the dashboard B02 from the line controlled by the ignition (INT).If there is a side lights signal and switch H90 is closed, the body computer M01 sends an earth signal which energizes the relay R14 , located in the engine compartment junction unit B01 , via the body computer at pin 8 connector C. At the same time, the body computer M01 also controls the switching on of the fog lamps on warning light located in the instrument panel E50 .The supply for the relay R14 is controlled by the ignition (15/54) and its outlet supplies the two fog light bulbs in the lamps: left F10 and right F11 , from pins 4 and 5 of connector B of the engine compartment junction unit B01 , respectively.The body computer can be supplied via pin 11 connector E (supply controlled by the ignition) and pin A connector C (direct supply) of the junction unit B02 . There is a protective fuse F1 for the direct supply located in the junction unit B01 .These lines also supply the instrument panel E50 via two lines protected by fuses F37 and F53 .Pins 8 and 9 connector D of the body computer are connected to earth.