Fiat ULYSSE 2.0 16v fino a 04/03 – SLIDING SIDE DOORS – – WIRING DIAGRAM, LOCATION COMPONENTS, OPERATIONAL DESCRIPTION – WIRING DIAGRAM, LOCATION COMPONENTS, OPERATIONAL DESCRIPTION

Wiring Diagram - SLIDING SIDE DOORS - Fiat ULYSSE 2.0 16v fino a 04/03

SLIDING SIDE DOORS WIRING DIAGRAM Fiat ULYSSE 2.0 16v fino a 04/03

Components - SLIDING SIDE DOORS - Fiat ULYSSE 2.0 16v fino a 04/03

Component code	Description	Reference to the assembly
C015	Driver''s dashboard earth	-
C030	Left rear earth	-
C031	Right rear earth	-
D020	Dashboard/rear coupling	-
D042	Courtesy light coupling	-
I131	Left sliding side door closing end of travel switch	-
I132	Right sliding side door closing end of travel switch	-
I133	Left sliding side door opening switch on courtesy light	7020N
I134	Right sliding side door opening switch on courtesy light	7020N
I135	Left sliding side door opening switch on left centre pillar	-
I136	Right sliding side door opening switch on right centre pillar	-
I137	Left sliding side door lock switch	-
I138	Right sliding side door lock switch	-
M001	Body computer	5505A
M093	Steering wheel node control unit (NVO)	5550A
M171	Sliding side door node	5505A
N166	Left sliding side door lock geared motor	7020N
N167	Right sliding side door lock geared motor	7020N
N168	Left sliding side door electric motor	7020N
N169	Right sliding side door electric motor	7020N

Location Components - SLIDING SIDE DOORS - Fiat ULYSSE 2.0 16v fino a 04/03

SLIDING SIDE DOORS LOCATION COMPONENTS Fiat ULYSSE 2.0 16v fino a 04/03

모든 배선 다이어그램에 액세스하십시오.

Components - SLIDING SIDE DOORS - Fiat ULYSSE 2.0 16v fino a 04/03

Component code	Description	Reference to the assembly
C015	Driver''s dashboard earth	-
C030	Left rear earth	-
C031	Right rear earth	-
D020	Dashboard/rear coupling	-
D042	Courtesy light coupling	-
I131	Left sliding side door closing end of travel switch	-
I132	Right sliding side door closing end of travel switch	-
I133	Left sliding side door opening switch on courtesy light	7020N
I134	Right sliding side door opening switch on courtesy light	7020N
I135	Left sliding side door opening switch on left centre pillar	-
I136	Right sliding side door opening switch on right centre pillar	-
I137	Left sliding side door lock switch	-
I138	Right sliding side door lock switch	-
M001	Body computer	5505A
M093	Steering wheel node control unit (NVO)	5550A
M171	Sliding side door node	5505A
N166	Left sliding side door lock geared motor	7020N
N167	Right sliding side door lock geared motor	7020N
N168	Left sliding side door electric motor	7020N
N169	Right sliding side door electric motor	7020N

Description - SLIDING SIDE DOORS - Fiat ULYSSE 2.0 16v fino a 04/03

The two sliding side doors can be opened/closed electrically from the inside:from the front seats using the buttons next to the courtesy lightfrom the centre seats using the buttons on the appropriate door pillar.When the button is pressed, the lock unlocks and the sliding door opens; when the button is pressed again, the door closes.The sliding side doors can be opened electrically using the special button on the remote control.The remote control built into the key on the version in question has 4 buttons:one for activating the (locking) command for the central locking, for switching on the alarm and for the location function < R1 > < R2 >one for activating the unlocking of the central locking and for switching off the alarm < R1 > < R2 >one for opening/closing the right sliding side doorone for opening/closing the left sliding side doorThe remote control receiver aerial is incoropated in the steering column switch unit (steering wheel node); the activation and/or deactivation information is sent to the Body Computer via the CAN.767Both the sliding doors are fitted with an anti-crush safety sensor which intervenes according to two different operating logics:during opening: if there is an obstacle, the door automatically stops;during closing: if there is an obstacle, the door stops and automatically reverses direction, opening fully.In this case, to restore correct operation, an electric command must be given using the remote control buttons or one of the buttons in the vehicle.In addition, for safety reasons, a special "locking" switch, located on the driver''s front door, allows the opening/closing of the sliding doors (as well as the operation of the electric windows in the rear doors < R1 > and the rear sun roofs < R2 > to be excluded so that their operation can be prevented, for example if children are present.The operating logic described above is controlled by the sliding door node which supervises the operation of the two movement motors for each door: one unlocks the lock, the other moves the door by means of a geared motor or two cables connected to the door guide pulleyThe initialization procedure is carried out in the following cases:battery disconnection,removing/refitting sliding door motor.To initialize the system it is necessary to:start with the door closed;control an opening (electrical);control a closing (electrical);control another opening (electrical).767the initialization is not lost from the system after the door is closed manually.

Operational Description - SLIDING SIDE DOORS - Fiat ULYSSE 2.0 16v fino a 04/03

The steering wheel node M093 receives the door open/closed signal from the remote control.The command (door opening or closing) is provided by the steering wheel node control unit M093 to the body computer node M001. The signal travels via the CAN which connects the two control units.The steering wheel node control unit M093 receives a supply (pin 5 connector A) through the line protected by fuse F11, located in the body computer node M001; it receives a supply via the CAN (pin 6 connector A) from the line protected by fuse F16, located in the body computer node M001.The signal reaches the steering wheel node control unit M093 and is sent, via the CAN, to the sliding side door node M171, connected to the network via pins 11, 13 connector A.The sliding side door node M171 receives a supply, via the CAN (pin 4 connector A) from the line protected by fuse F01 for the body computer node M001.Pins 1, 8 connector A receive a direct supply via the line protected by fuses F01 and F02 of the maxifuse box B005; the control unit is earthed at pins 9, 16.The command for the electrical opening of the sliding side doors comes from the specific switches fitted in the courtesy light I133 (left side) and I134 (right side) or from the switches on the centre pillars I135 (left side) and I136 (right side).All the switches receive a supply, at pin 4, via the CAN, from the line protected by fuse F01 of the body computer node M001.The switches are earthed at pin 3, whilst an earth signal is sent from pin 6 to control unit M171, to pins 2, 15, 3 and 6, connector A, respectively to control the opening of the specific sliding side door.The control unit M171 controls the electric motors for the locks N166 left and N167 right from pins 5, 14 of connector A.The control unit receives the signal, at pins 10, 7, that the locks are correctly locked from the door switches I137 and I138, respectively.The electric motors for moving the sliding side doors N168 and N169 are controlled by pins 1, 2 connector B and pins 1, 2 connector E, respectively.Switches I131 and I132 notify the control unit that the sliding side doors are correctly closed.Switch I131 is connected to connector C of control unit M171 and switch I132 is connected to connector D of the control unit. The control unit provides the switches with a supply from pins 3, 4 of connector C and D for the warning light incorporated in the actual switches.