Bauteile - EINBAUVORBEREITUNG ANHANGER - Fiat ULYSSE 2.2 16V JTD fino a 04/03
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
B001 | VERTEILER IM MOTORRAUM | |
B005 | GRO?SICHERUNGSKASTEN | - |
B70 | SICHERUNG ANHANGERVORBEREITUNG | - |
C020 | MASSE ARMATURENBRETT BEIFAHRERSEITE | - |
D006 | VORDERE/HINTERE VERBINDUNG | - |
D073 | VERBINDUNG ANHANGER (VORBEREITUNG) | - |
D218 | Anschluss Anhangerverbindung | - |
L020 | E-MAGNET ZUM EINSCHALTEN DES KLIMAKOMPRESSORS | - |
M001 | BODY COMPUTER | |
M181 | Anhangersteuerung | - |
Das Fahrzeug kann mit einer zugelassenen Anhangerkupplung fur Wohnwagen, Anhanger etc. ausgestattet werden.Diese Vorrichtung muss die geltenden Vorschriften beachten und nach den Anweisungen im Montagekit eingebaut werden.Der Bausatz enthalt au?er der eigentlichen Anhangerkupplung auch eine Elektronik fur die Au?enleuchten des Anhangers sowie ein spezielles Verbindungskabel fur diese Elektronik zu den Fahrzeugruckleuchten und einer speziellen Verbindung im Fahrzeug, die sich im Kofferraum auf der rechten Seite befindet.767 Die Funktionen der Rangiersensoren wird automatisch verhindert, wenn ein Anhanger angeschlossen wird.
Die Anhanger-Steuerung M181 wird wie folgt versorgt:- an Pin 2 Stecker A von der Leitung mit Sicherung MF3 im Gro?sicherungskasten B005 (Pin 1 Stecker C);- an Pin 3, 6 und 4 Stecker B, vom Knoten Body Computer M001 (Pin 11 und 4 Stecker B und Pin 4 Stecker F): die erste der drei Leitungen wird von der Sicherung F12 geschutzt.Von Pin 4 Stecker B der Steuerung M181 geht eine Leitung aus, die von der Sicherung B070 geschutzt wird und die an Pin 1 Stecker B der Verbindung fur die Vorbereitung fur Anhanger D073 anliegt.Die Steuerung M181 dialogiert (Pin 1 und 2 Stecker B) mit dem Knoten Body Computer M001 (Pin 37 und 39 Stecker I), der (Pin 36 und 38 Stecker I) die eventuellen Informationen an die Rangiersensoren weiter leitet. Diese Informationen werden uber CAN ubertragen.Pin 1 Stecker C der Steuerung M181 ist an den selben Pin und Stecker der Anhangerverbindung D073 angeschlossen. Am selben Stecker sind auch die Pin 15, 12, 11, 8, 16, 7, 6, 5, 4, 2 des Steckers B in M181 angeschlossen; die Pin 14 und 13 sind an Pin 12 und 11 kurzgeschlossen, wahrend Pin 3 an Masse O96 anliegt.
Bauteil-Nr. | Bezeichnung | Bezug zur Baugruppe |
B001 | VERTEILER IM MOTORRAUM | |
B005 | GRO?SICHERUNGSKASTEN | - |
B70 | SICHERUNG ANHANGERVORBEREITUNG | - |
C020 | MASSE ARMATURENBRETT BEIFAHRERSEITE | - |
D006 | VORDERE/HINTERE VERBINDUNG | - |
D073 | VERBINDUNG ANHANGER (VORBEREITUNG) | - |
D218 | Anschluss Anhangerverbindung | - |
L020 | E-MAGNET ZUM EINSCHALTEN DES KLIMAKOMPRESSORS | - |
M001 | BODY COMPUTER | |
M181 | Anhangersteuerung | - |