VW CADDY 1998 – Electrically adjustable and heated exterior mirrors, only Polo Variant . Wiring diagrams, Pin Connector, Location

Wiring Diagram VW CADDY 1998 - Heated rear window switch - heated rear window

E15	Heated rear window switch
E20	Switches and instruments - lighting control
K10	Heated rear window warning lamp
L10	Dash panel insert light bulb
L39	Heated rear window switch bulb
T5m	5-pin connector, near right tail light
T5n	5-pin connector, near left tail light
T28	28-pin connector, on dash panel insert
Z1	Heated rear window
30	Earth point -1-, next to relay plate
60	Earth point -2-, near right tail light
87	Earth connection -2-, in rear wiring harness
205	Earth connection, in door wiring harness - driver's side
287	Earth connection, in rear lid pre-wiring wiring harness
Z5	Connection, in window heating wiring harness

E43	Mirror adjustment switch
E48	Mirror adjustment change-over switch
L78	Mirror adjustment switch illumination
T5b	5-pin connector, on lower part of left A pillar
T5c	5-pin connector, on lower part of right A pillar
T6d	6-pin connector, on lower part of left A pillar
T6e	6-pin connector, on lower part of right A pillar
T6f	6-pin connector, on lower part of left A pillar
TV5	Terminal 15a junction box, above the relay plate
TV9	Terminal 58 junction box, above the relay plate
V17	Mirror adjustment motor, driver' side
V25	Mirror adjustment motor, front passenger's side
Z4	Heated exterior mirror, driver's side
Z5	Heated exterior mirror, front passenger's side
205	Earth connection, in door wiring harness - driver's side
A3	Positive (+) connection (58), in dash panel wiring harness
A4	Positive (+) connection (58b), in dash panel wiring harness
Q23	Positive (+) connection -2- (15), in electric window wiring harness
Z1	Connection -1-, in mirror adjustment/heating wiring harness