VW NEW SAGITAR 2016 – Anti-lock brake system (ABS) with electronic stabilisation program (ESP), (GP1) . Wiring diagrams, Pin Connector, Location

Wiring Diagram VW NEW SAGITAR 2016 - Rear right speed sensor - Front right speed sensor - Rear left speed sensor - Front left speed sensor - ABS control unit

G44	Rear right speed sensor
G45	Front right speed sensor
G46	Rear left speed sensor
G47	Front left speed sensor
J104	ABS control unit
N133	Rear right ABS inlet valve
N134	Rear left ABS inlet valve
SB15	Fuse 15 on fuse holder B
SB30	Fuse 30 on fuse holder B
T2ar	2-pin connector
T2as	2-pin connector
T2at	2-pin connector
T2au	2-pin connector
T47	47-pin connector
B702	Connection (rear left speed sensor +) in interior wiring harness
B703	Connection (rear left speed sensor -) in interior wiring harness
B704	Connection (rear right speed sensor +) in interior wiring harness
B705	Connection (rear right speed sensor -) in interior wiring harness
D184	Connection (front left speed sensor +), in engine compartment wiring harness
D185	Connection (front left speed sensor -), in engine compartment wiring harness
*	Cross section depends on equipment

F	Brake light switch
G200	Lateral acceleration sender
G202	Yaw rate sender
G294	Brake servo pressure sensor
G419	Sensor unit for electronic stabilisation program
J104	ABS control unit
N101	Front left ABS inlet valve
N135	Rear right ABS outlet valve
N136	Rear left ABS outlet valve
SC14	Fuse 14 on fuse holder C
T4al	4-pin connector
T4bn	4-pin connector
T47	47-pin connector
V64	ABS hydraulic pump
278	Earth connection 4, in interior wiring harness
638	Earth point, on right A-pillar
752	Earth point 3, on right A-pillar
A20	Positive connection (15a), in dash panel wiring harness
B335	Connection 1 (54), in main wiring harness
*	Only models with hydraulic brake servo (HBS)
*2	Only models with "High" equipment (AW1)

E492	Tyre Pressure Loss Indicator button
G201	Brake pressure sender 1
J104	ABS control unit
L76	Button illumination bulb
N99	Front right ABS inlet valve
N100	Front right ABS outlet valve
N102	Front left ABS outlet valve
N227	Vehicle stabilization program high-pressure valve 1
N228	Vehicle stabilization program high-pressure valve 2
SC13	Fuse 13 on fuse holder C
T6ak	6-pin connector
T47	47-pin connector
238	Earth connection 1, in interior wiring harness
A19	Connection (58d), in dash panel wiring harness
B383	Connection 1 (powertrain CAN bus, high), in main wiring harness
B390	Connection 1 (powertrain CAN bus, low), in main wiring harness
U25	Connection (15), in manual gearbox wiring harness
*	Only models with Tyre Pressure Monitoring System
*2	Only models with "High" equipment (AW1)
*3	Only models with "Low" equipment (AW0)

J519	Onboard supply control unit
J533	Data bus diagnostic interface, in left footwell, near centre console
T16	16-pin connector
T20	20-pin connector
T52b	52-pin connector
T52c	52-pin connector
T73b	73-pin connector
U31	Diagnostic connection
277	Earth connection 3, in interior wiring harness
B383	Connection 1 (powertrain CAN bus, high), in main wiring harness
B390	Connection 1 (powertrain CAN bus, low), in main wiring harness
B397	Connection 1 (convenience CAN bus, high), in main wiring harness
B406	Connection 1 (convenience CAN bus, low), in main wiring harness
B708	Connection 1 (dash panel insert CAN bus high) in main wiring harness
B709	Connection 1 (dash panel insert CAN bus low) in main wiring harness
B713	Connection 1 (CAN bus diagnosis, high), in main wiring harness
B714	Connection 1 (CAN bus diagnosis, low), in main wiring harness
*	Only models with "High" equipment (AW1)
*2	Only models with "Low" equipment (AW0)

F9	Handbrake warning switch
F34	Brake fluid level warning contact
H3	Buzzer and gong
J285	Control unit in dash panel insert
K47	ABS warning lamp
K118	Brake system warning lamp
K155	Warning lamp for electronic stabilisation program and TCS
K220	Tyre Pressure Loss Indicator warning lamp
T2ap	2-pin connector
T2w	2-pin connector
T32	32-pin connector
82	Earth connection 1, in front left wiring harness
108	Earth connection 2, in front left wiring harness
672	Earth point 2, on front of left longitudinal member
*	Only models with "High" equipment (AW1)