Dodge Intrepid R/T 2001 - 2001 ELECTRICAL Fuses & Circuit Breakers - 300M, Concorde, Intrepid & LHS
Dodge Intrepid R/T 2001 - JUNCTION BLOCK
CAUTION: When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload. If a properly rated fuse continues to blow, it indicates a problem in the circuit that must be corrected.
Dodge Intrepid R/T 2001 - FUSES
NOTE: Power Distribution Center (PDC) also contains fuses. See POWER DISTRIBUTION CENTER (PDC) .
The junction block is located behind the end cover at the left side of the instrument panel. See Fig. 1 . Pull the cover straight away from the instrument panel for access to the fuse. The location and identification of junction block fuses and relays can be found on the inside of the instrument panel end cover.
Fig. 1: Dodge Intrepid R/T 2001 - Component Locations - Locating Junction Block
Fig. 2: Dodge Intrepid R/T 2001 - Component Locations - Identifying Interior Fuses
Dodge Intrepid R/T 2001 - POWER DISTRIBUTION PANEL POWER DISTRIBUTION CENTER
A Power Distribution Center (PDC) is located in the engine compartment. See Fig. 3 . This center contains fuses and relays for circuits that operate only under the hood. A label which identifies these components is located on the underside of the cover.
Fig. 3: Dodge Intrepid R/T 2001 - Component Locations - Locating Power Distribution Center
Dodge Intrepid R/T 2001 - RELAY TERMINAL IDENTIFICATION A/C Compressor Clutch
Dodge Intrepid R/T 2001 - Automatic Shut Down Relay
Dodge Intrepid R/T 2001 - Engine Starter Motor Relay
Fig. 8: Dodge Intrepid R/T 2001 - Component Locations - Identifying Starter Motor Relay Terminals
Dodge Intrepid R/T 2001 - Fuel Pump Relay
Fig. 9: Dodge Intrepid R/T 2001 - Component Locations - Identifying Fuel Pump Relay Terminals